Fusion Collection from American Fluorescent

American Fluorescent Fusion Vanity FUV

American Fluorescent FREE SHIPPING*!
* with qualifying Purchase
Quantity Discounts Available.

Fusion Vanity
Subtle and contemporary Satin Nickel finish Electronic Ballast (fluorescent) Energy Star qualified (fluorescent).

Features
Unique patterned frosted white glass wall mount vanity is ADA compliant. Fixture includes two die-cast aluminum satin nickel end caps and mounts horizontally with power supply connections made inside the housing or to a 2" x 4" handy-box (not included). Offset J-box mounting is possible (consult factory).

Construction
The wiring channel is formed from 22-gauge steel and is provided with standard mounting holes and wiring access. Decorative end caps are .040" thick die cast aluminum.

Finish
Decorative end caps are plated with a satin nickel finish and a clear lacquer topcoat. Internal housing is finished in lighting grade based gloss white enamel paint.

Diffuser
Diffuser is a patterned .156" thick blow formed frosted white glass. The 2’ model includes a one-piece glass lens while the 3’ and 4’ models include 2 diffusers and center joiner band. Decorative end caps and thumbnuts secure diffuser.

Electrical
This unit can be ordered in the following options: with UL listed instant-start, electronic high power factor ballast; 120V 60Hz AC (E8 suffix), 120-277 Universal 50/60Hz AC (MV suffix).

Lamping
For use with (2) T8 linear fluorescent lamps(not included).

Certification
All fixtures are cULus listed for damp locations.

Options (consult factory)
Emergency battery backup
Dimming
ENERGY STAR qualified with 120V ballast

American Fluorescent Fusion ADA Sconce FUS

American Fluorescent Fusion ADA Sconce FUS

American Fluorescent FREE SHIPPING*!
* with qualifying Purchase
Quantity Discounts Available.

Fusion Sconce
Subtle and contemporary. Satin nickel finish base. Distinctive textured glass. Universal voltage, 120-277V, electronic ballast. Meets ADA requirements.

Features
Unique patterned frosted white glass two light wall mount sconce is ADA compliant and has a die-cast aluminum satin nickel trim band. Open top and enclosed white acrylic bottom. Fixture mounts to standard junction box (not included).

Construction
Back plate is die-formed of 22-gauge steel. Standard mounting holes and hardware are included. Power supply connections must be made inside a junction box (not included).

Finish
Backplate is finished in lighting grade white baked gloss enamel paint. Trim band is die-cast aluminum with a plated satin nickel finish.

Diffuser
Diffuser is a patterned .156" thick blow formed frosted white glass.

Electrical
This unit can be ordered in the following options: with UL listed programmed-start, electronic normal power factor ballast; 120-277V Universal 50/60Hz AC (MV suffix).

Lamping
For use with 2-13 watt compact fluorescent 4-pin quad lamps; not included

Certification
All fixtures are cULus listed for damp locations.
Options (consult factory)
2-26, 2-18, 1-26 lamping

Dimming
ENERGY STAR^® qualified with 120V ballast

American Fluorescent Fusion Sconce FUW Series
Above: FUW113
Below: FUW113 on left,
FUW213 on right

American Fluorescent Fusion Sconce FUW Series

American Fluorescent FREE SHIPPING*!
* with qualifying Purchase
Quantity Discounts Available.

Fusion Outdoor Sconces
Satin nickel finish. Distinctive textured white glass diffuser. 120V Electronic ballast, minium starting temp 0° F. Available in short or tall sizes. UL listed for wet locations. 13W CFQ lamp required. PC model offered with photosensor.

Features
Unique patterned frosted white glass outdoor wall sconce is ADA compliant and is UL listed for wet location. Sconce includes die-cast aluminum satin nickel trimmed end caps and housing that are corrosion resistant. Fixture mounts to standard junction box (not included).

Construction
Back plate is die-formed of 18-gauge aluminum. End caps are 18-gauge die-cast aluminum. Standard mounting holes and hardware are included. Power supply connections must be made inside a junction box (not included).

Finish
Back plate is finished in lighting grade white baked gloss enamel paint. End caps are plated satin nickel with clear lacquer topcoat.

Diffuser
Diffuser is a patterned .156" thick hand blown formed frosted white glass that is held in place with 2 decorative end caps with ball fasteners.

Electrical
This unit is wired with UL listed electronic normal power factor ballast for 120V/60 Hz AC operation. Minimum starting temperature of 0 degree F.

Lamping
FUW113 uses 1 x 13 watt compact fluorescent 4 pin quad lamps, not included.
FUW213 uses 2 x 13 watt compact fluorescent 4 pin quad lamps, not included.

Certification
All fixtures are cULus listed for wet locations.

Options
Photosensor (PC)
ENERGY STAR qualified with photosensor (PC)
FUW213 120-277V HPF