To Order:
Call 800-585-1285
Monday to Friday 9 to 6 EST
Saturday 10 to 5 EST
Sunday Closed
or
E-mail [email protected]

Se habla Español
We speak English,
Russian & Hebrew

Our Site

Home
Product Site Map
Brand Site Map
Style Site Map
CLEARANCE

Call Brand Lighting Sales 800-585-1285
Ask about SALES & SPECIALS!
Ask about FREE SHIPPING*!
(where available)

American Lighting Indoor or Outdoor Linear LED Wall Washers

American Lighting LED Linear Wall Washers

Click to email for pricing.American Lighting Indoor or Outdoor Linear LED Wall Washers

Clearly Something New

The American Lighting LED Linear RGB wall Washer Series is a set of robust color- washing fixtures that create dynamic, full RGB color mixes, producing up to 16 million colors and projectng light up to 65 feet. High power LEDs are rated for up to 100,000 hours and require no maintenance, saving energy and labor costs. The durable housing is sealed, rated IP65, manages heat dissipation efficiently, keeping the LEDs cool. The fixture meets the needs of lighting designers, architects and specifiers by offering an exciting new array of effect lighting possibilities, both interior and exterior.

Uses

  • Signs
  • Statuary
  • Nightclubs
  • Hotels
  • Restaurants
  • Building Facades
  • Backlighting

Features

  • Full RGB color mixing produces 16 million colors
  • High brightness 1 watt LEDs create bright, dynamic wash of light, projecting up to 20 meters (65 feet)
  • Sets of Red, Green and Blue LEDs are controllable via an RGB controller, which also can be used as DMX interface (sold separately)
  • Fully DMX compatible, enabling direct control from any DMX control system
  • Durable die-cast powder coated aluminum housing is sealed for use in wet locations (IP65)
  • East to install - each unit has five foot cord with grounded plug (use with GFCI weatherproof outlet for each outdoor unit) and durable standoffs with mounting holes for affixing to various mounting surfaces
  • Data input and output cables can be linked directly to each other or use extensions as necessary to span gaps
  • Long life, low maintenance LEDs last 100,000 hours (average life)
  • Link up to 30 units together to one controller for synchronous lighting effects
  • Use multiple controllers to create large scale building and facade lighting systems
  • LED sources save significantly in energy and maintenance costs when compared to any other type of flood light source
  • Available in three lengths with adjustable tilt with locking handle design allow on-site housing angle control
  • Adjustable tilt with locking handle design allows on-site housing angle control
  • 25° beam angle; 150° tilt from zenith
  • Available in three lengths
  • Three year warranty

American Lighting Linear LED Wall Washer RGB Series

Color Changing Fixture 12X1 = 12 LEDs, 15-3/4" length, 21.6 watts
24X1 = 24 LEDs, 31-1/2" length, 43.2 watts
36X1 = 36 LEDs, 47-1/4" length, 64.8 watts

Not every Installation: requires DMX. Factory presets allow multiple static colors and simple fade operations. Specify DMX equipment when specific color matching is required and/or when fixtures need to have different colors and values simultaneously. Call factory for details.

Cables & Accessories

  LW36-EC15
Fifteen foot signal extensions with male and female connectors
  LW36-CON
Controller for LED Wall Washer, user programmable or for use as DMX interface, 120V AC, six foot power cord

LW24X1-RGB (shown) contains 8 Blue, 8 Green and 8 Red high power LEDs (colors alternate R, G, B, R, G, etc.)

To Determine a Bill of Materials

  • Determine total length of surface to be lighted - for applications where linear wall washer will be within 6" of the surface, plan on running fixtures end-to-end for best results (to avoid gaps in light wash)
  • Consider areas to be lighted - if non-adjacent areas can be linked, determine quanitity of power and signal cables needed
  • For synchronous color control (synchronous color fades and standard color select), order one LW36-CON for each run of 30 unit or less
  • For custom shows, custom colors and/or multi-channel scenes, specify DMX-HD with LW36-XLR3 or LW36-XLR3-15
    Custom cables also available.

Installation: Example

Bill of materials for 40 foot Installation: above:

  • (10) LW36X1-RGB
  • (1) LW36-CON

Each fixture has the following cords:

  • Power input with five foot power cord
  • Signal input using male mini 3-pole connector, 12" length
  • Signal output using female mini 3-pole connector, 12" length

Each Linear RGB Wall Washer requires its own outlet or extension cord to a receptacle. However, there is no "power out" cable to link power from one to the next when using the linear form factor. Data cable can be linked directly, or by using signal extension cables.

Technical Specifications

Voltage 120V AC, 60 Hz
Construction Aluminum alloy housing and integrated driver with IP65 rating, fully sealed for use in wet locations, black enamel finish (for LW36-RGB) silver enamel for Linear Wall Washers
Mounting Integrated mounting holes in housing legs/brackets
Dimensions LW36-RGB: H = 8-3/4", W = 12-5/8", D = 5-11/16"; Linear units: H = 5", W = 2-3/16"
Available lengths = 15-3/4", 31-1/2" and 47-1/4"
Control leads 12" input power and 12" output power adapter lead (LW36-RGB only); 12" input signal and 12" output signal, mini 3-pin signal connector
Switching Use switched outlet to control power to controller or streamer
Wattage LW36-RGB = 48 watts; LW12X1-RGB = 21.6 watts, LW24X1-RGB = 43.2 watts, LW36X1-RGB = 64.8 watts
Maximum run For signal: 3,000 feet between controller and final fixture; for "daisy-chaining" indoors 120V power (LW36-RGB): 30 wall washers
Linking data Interconnect directly for 18" spacing; use fifteen foot signal cables (interconnectable to create longer lengths) for linking multiples
LED specs 100,000 hour rated life, high power (1-watt) LEDs, Red: 2.4V, Green and Blue: 3.6V, 350mA, 5mm, 25° beam angle
Dimmers Use with DMX compatible interface and DMX controller; not dimmable with wall dimmers
Diffuser Clear polycarbonate lens
DMX Three channels, compatible with USITT standard DMX512 output lighting control software

Alternative Bill of Materials

  • Determine height and width of area to be lighted
  • Determine how far fixtures will be from area to be lighted
  • Determine how many Wall Washers to be used
    For con!nuous wall wash effect, linear fixtures should be placed end-to-end and at least 4" from wall or surface to be lighted.
  • For synchronous color control, order one LW36-CON for each run of thirty units or less
  • For advanced color control, order one DMX-HD and one LW36-XLR3 for each run of thirty units or less
  • Determine quan!ty of fifteen foot signal cables, if needed
  • Determine quan!ty of fifteen foot power cables, if needed (indoor use only).
  • For outdoor use, ensure that each Wall Washer has a GFCI weatherproof outlet within five feet of its location.

Performance is influenced or affected by surface color (reflectence), ambient light levels and any competing light sources.