This page was from our old website and may contain outdated information. New products and information can be found through our Products menu above or the links below. Please contact us with any product information or availability questions at (888) 991-3610.
Architectural Outlines & Rope Lighting
LED eStrip as step and rail lighting
NSL LED eStrip
Field cuttable every 6"
Accessories, drivers and mounting sold separately
Complete LED 6mm x 12mm PVC light strip uses LEDs spaced every inch for .96 watts per foot. LEDs are mounted to Flexible Printed Circuit Board technology and extruded in a flexible light strip crushproof to 100 PSI.
Safe 24 volt remote power supply powers 90 feet per single run.
Warm White, Cool White , Red, Amber or Green LEDs
UL listed Indoor & Outdoor to new tough UL 2388 standards.
Dimmable!
Optional LED eStrip Reflector increases light output over 50%.
Finish: Polished Brass, Bright Aluminum, Gloss White, Gloss Black
LED eStrip Fascia Extrusion shields LED eStrip from view while reflecting light toward appropriate surface.
Finish: Bright Aluminum, Gloss White
Nora NUTP4-16LED30PS 12V 16' Tape Light Kit
Easy Installation
Adhesive Back or Mounting Clips
Includes pre-applied 3M adhesive tape and 15 acrylic clips.
LED Tape Light bundle is a perfect solution for your LED linear lighting needs. This energy efficient and very low profile LED tape is great for use in many discreet locations. The flexible LED light is designed to cast no shadows and boasts a desirable seamless glow. Durable silicone encapsulated tape is rated for Wet Location applications (end of roll power connection & driver are not wet location listed) and is IP65 rated. Available in a roll or kit.
NUTP4-16LED30PS 16' 12V LED Tape Light Kit, 3000K CCT
Included:
- (1) 3000K Tape Light roll [NUTP4-16LED30]
- (15) Clear Acrylic clips with screws [NATL-401]
- (5) Shrink Wrap Tubes [NATL-400]
- (1) 9" Power Line Interconnector [NATL-515]
- (1) 12V 24W Direct Plug-in Driver [NAPK-524]
Accessories: All Tape Light accessories are compatible with the Tape Light Kit
Note: any additional Tape Lights added require a larger driver.
Mounting: Each Tape Light roll comes with pre-applied 3M™ adhesive tape and 15 acrylic clips. Channel is sold separately for a straighter run.
Cuttable: Tape Light is cuttable every 4", no soldering required.
Separable: Tape Light has separable connections every 12", no soldering required
Driver: 12V 24W Plug-in Driver is included with the kit. 5 different wattages are available to accommodate different run lengths.
Power: 12V DC Input / 1.5 Watts Per Foot
Light Source: 18 LEDs per foot
Color Temperature: 3000 Kelvin (30)
Dimensions: Length: 16' x Width: 7/16" x Height: 1/8"
Listing: Title 24 Compliant
cULus Listed for Wet Location
IP65 Rated
California Energy Commission
Warranty: 3 Years Limited
American Lighting LED Tape-Rope Hybrid 120-TL60
American Lighting LED Tape-Rope Hybrid 120-TL60
Small and bright like Tape Light, long runs like Rope Light
Easy to use, flexible, dimmable option with 3528 LED performance. Great for use in coves, restaurants and bars, retail displays, reception areas, uplighting and more.
Extendable! Install with clips or track!
Tape-Rope measures 3/8" wide by 1/4" high; in track, 1/2" wide by 7/16" high.
Connection fittings measure 7/8" in diameter.
- Line voltage kits are economical – no drivers required!
- High light output – up to 80 lumens/foot in a compact size
- Low profile and flexible housing measures only 3/8" wide and 1/4" high
- LEDs spaced every .65" produce even and bright light
- High output – White produces 80 lumens per foot (Warm White produces 72 lumens per foot)
- Easy to install – kits interconnect and plug into standard 120V AC receptacles
- Use for long or short distances where light is needed
- Dimmable with most standard incandescent dimmers
- Low maintenance LEDs last up to 35,000 hours (average life)
- Colors: BL = Blue, GR - Green, RE = Red, WH = Bright White, WW = Warm White
120-TL60-3.3-WH White 3.3'
120-TL60-6.6-WH White 6.6'
120-TL60-13.2-WH White 13.2'
120-TL60-19.7-WH White 19.7'
120-TL60-32.8-WH White 32.8'
120-TL60-45.9-WH White 45.9'
120-TL60-3.3-WW Warm White 3.3'
120-TL60-6.6-WW Warm White 6.6'
120-TL60-13.2-WW Warm White 13.2'
120-TL60-19.7-WW Warm White 19.7'
120-TL60-32.8-WW Warm White 32.8'
120-TL60-45.9-WW Warm White 45.9'
120-TL60-3.3-BL Blue 3.3'
120-TL60-6.6-BL Blue 6.6'
120-TL60-13.2-BL Blue 13.2'
120-TL60-19.7-BL Blue 19.7'
120-TL60-32.8-BL Blue 32.8'
120-TL60-45.9-BL Blue 45.9'
120-TL60-3.3-GR Green 3.3'
120-TL60-6.6-GR Green 6.6'
120-TL60-13.2-GR Green 13.2'
120-TL60-19.7-GR Green 19.7'
120-TL60-32.8-GR Green 32.8'
120-TL60-45.9-GR Green 45.9'
120-TL60-3.3-RE Red 3.3'
120-TL60-6.6-RE Red 6.6'
120-TL60-13.2-RE Red 13.2'
120-TL60-19.7-RE Red 19.7'
120-TL60-32.8-RE Red 32.8'
120-TL60-45.9-RE Red 45.9'
120-TL-JUMP-3 3' linking extension (jumper)
120-TL-JUMP-6 6' linking extension (jumper)
120-TL-JUMP-15 15' linking extension (jumper)
120-TL-TRACK-4 4' clear plastic track
Voltage 120V, 60 Hz AC operation (1.6A inverter on cord converts AC power to DC for LEDs)
Construction LEDs spaced every .65" inside durable white PVC housing with clear PVC jacket
Mounting Each kit includes clear plastic mounting clips (4 per foot) ; for straight-line installations, use with 4-foot clear plastic track, item number 120-TL-TRACK4 (sold separately)
Dimensions H = 1/4", W = 3/8" (W = 1/2"; H = 7/16" in mounting track)
Cuttability N/A – there are no accessories to support product that has been cut
Light output Approximately 72 lumens per foot for WW; approximately 80 lumens per foot for WH
Wattages As noted above, except Red: 2.2W for 3-foot, 4.4W for 6-foot, 8.8W for 12-foot, 13.2W for 18-foot, 22W for 30-foot, 33W for 45-foot
Power cord Five foot removable power cord with 1.6A inverter and 2-blade polarized 120V AC plug
Maximum run Interconnect WH and WW kits up to 106 feet; BL and GR up to 106 feet or interconnect Red kits up to 211 feet
LED specs 35,000 hour rated life, 3000K, 67 CRI for WW; 5000K, 78 CRI for WH; 3528 LEDs, 4V/LED for BL, GR, WH and WW; 2.4V/LED for RE
Dimmers Dimmable with most standard incandescent dimmers (minimum loads may apply) Switched wall outlet cannot be used with a wall dimmer per the N EC.
Packaging Retail blister packs for 3', 6' and 12' kits; Retail boxes for 18', 30' and 45' kits
Interconnecting Sections: Connect male and female halves together and firmly tighten connectors to secure.
American Lighting LR-LED Series UL Listed LED Flexbrite Rope Light Kits
Energy efficient UL Listed and CSA Rated kits are easy to install.
Save 82% in energy usage compared to incandescent. Great for accent lighting, decorative lighting, outlines, architectural details, patios, decks, gazebos and more.
- Indoor/outdoor rated
- LED Flexbrite kits include: Flexbrite, pre-connected removable five foot power cord, end cap and one mounting clip per food of Flexbrite
- Kits are extendable up to 192 feet – attach multiple kits together (no tools required)
- Produces virtually no heat for maximum safety
- Available in 6400K (Cool White) and 2700K (Ultra Warm White)
- Highest quality PVC with UV inhibitor to maximize life and performance
Kelvin temperatures may not match across different length kits; use kits in like sizes as a rule.
Bill of Materials
- Determine length needed to the nearest multiple of 3 feet, up to 192 feet
- Order kits in like sizes where possible
- Order mounting track for straight runs (recommended) ; clips are included with kits
LR-LED Series UL Listed LED Flexbrite Rope Light Kits
LR-LED-CW-3 Cool White 3'
LR-LED-UWW-3 Ultra Warm White 3'
LR-LED-CW-9 Cool White 9'
LR-LED-UWW-9 Ultra Warm White 9'
LR-LED-CW-15 Cool White 15'
LR-LED-UWW-15 Ultra Warm White 15'
LR-LED-CW-30 Cool White 30'
LR-LED-UWW-30 Ultra Warm White 30'
LR-LED-CW-75 Cool White 75'
LR-LED-UWW-75 Ultra Warm White 75'
LR-LED-CW-150 Cool White 150'
LR-LED-UWW-150 Ultra Warm White 150'
ULRL-EXT3
Three foot jumper for Flexbrite kits only, white wire; includes two power connectors
LR-CLIP-20
Blister pack of twenty clear mounting clips with screws
DL-CLIP/SCREW
Clear "U" shaped mounting clip that securely holds rope light in place.
Clips are included with kits (one per foot of rope).
DL-TRACK-4
Four foot clear mounting track with UV rating for outdoors; recommended for use with straight line installations
RL-TRK-3
Three foot clear mounting track Sold in case quantities of 40 only.
Voltage 120V, 60Hz AC operation
Construction Heat resistant clear PVC housing with LEDs every 1", vertical mount
Mounting Clear plastic mounting clips or track
Dimensions 1/2" diameter
Cuttability N/A – there are no accessories to support product that has been cut
Light output CW = 6.3 lumens per foot, UWW = 5.5 lumens per foot
Wattages 1 watt per foot
Maximum run 192 feet
Switching Provide switched outlet for On/Off control
Linking Interconnect kits with no additional parts or use ULRL-EXT 3 jumper for connecting two sections together
LED specs 60,000 hours, .067 watt, 1.11V, 60mA, 3mm, 120° beam angle; UWW (2700K) CRI = 73; CW (6400K) CRI = 80
Dimmers Switched wall outlets cannot be used with wall dimmers per the NEC. Dimmable with most CFL/LED and low voltage electronic dimmers (minimum loads may apply).
Diffuser Clear PVC jacket
Packaging Retail blister packs (3', 9' and 15' lengths) , retail boxes (30' lengths) or white cartons with color sticker for 75' length
Interconnecting Sections: Connect male and female halves together and firmly tighten connectors to secure.
American Lighting 042 Series UL Listed Commercial Grade Rope Light Kit
Convenient, interconnectable and economical kits
- Indoor/outdoor rated
- Dimmable
- Rope light kits include: UL2388 Listed or CSA Rated rope light, pre-connected (removable) five foot power cord, removable end cap and one mounting clip per foot
- Kits are easily extendable up to 150 feet (CSA) or 200 feet (UL) for premium grade; up to 150 feet for commercial grade
- Quickly attach multiple kits together without the use of tools
- Highest quality PVC with UV inhibitor to maximize life and performance
- The plug contains a replaceable electrical fuse as a safety feature.
Bill of Materials
- Determine length needed to the nearest 24" increment.
- Order kits in lengths to match target length, up to maximum run lengths.
- Order mounting track for straight runs (recommended) ; clips are included with kits (one per foot of rope) .
Consider using shorter length kits to build longer custom lengths. If one section should fail, a kit can be replaced (which maintains UL Listing) versus repairing a section, which voids UL.
042 Series UL Listed Commercial Grade Rope Light Kit
042-CL-2 Clear 2'
042-CL-6 Clear 6'
042-CL-10 Clear 10'
042-CL-18 Clear 18'
042-CL-30 Clear 30'
042-CL-50 Clear 50'
DL-CLIP/SCREW
Clear "U" shaped mounting clip that securely holds rope light in place.
Clips are included with kits (one per foot of rope).
ULRL-EXT-3
Three foot jumper for Rope Light Kits, white wire; includes two power connectors, blister pack.
DL-TRACK-4
Four foot clear mounting track with UV rating for outdoors; recommended for use with straight line installations
RL-TRK-3
Three foot clear mounting track Sold in case quantities of 40 only.
Voltage 120V, 60Hz AC operation
Construction UV resistant clear PVC housing with incandescent lamps spaced every 1.09" for 042 kits and 1" spacing for 018 and CSA-CL kits, vertical mount
Mounting Clear plastic mounting clips or track
Dimensions 1/2" diameter
Light output 042 kits = 6.5 lumens per foot, 018 and CSA-CL kits = 4.6 lumens per foot
Wattages 042 kits = 3.78 watts per foot; 018 and CSA-CL kits = 3.1 watts per foot
Maximum run 150 feet for 042 and CSA-CL kits; 200 feet for 018 kits
Switching Provide switched outlet for On/Off and dimming control
Linking Interconnect kits with no additional parts or use ULRL-EXT-3 jumper for connecting two sections together
Lamp Specs 25,000 hour rated life; 6.5V, 70mA, 1.09" lamp spacing for 042 kits; 5V, 50mA, 1" lamp spacing for 018 and CSA-CL kits
Dimmers Switched wall outlets cannot be used with wall dimmers per the NEC.
Dimmable with most standard incandescent dimmers.
Diffuser Clear PVC jacket
Packaging 042 kits packaged in white boxes; 018 and CSA-CL kits packaged in retail blister packs (2', 6' and 10' lengths) or retail boxes (18', 30' and 50' lengths)
Available in Nine Colors
Factory assembled connector
American Lighting 033 UL Listed Custom Cut UL Compliant Light Rope
UL Listed custom cut to your specifications to the nearest 24" cutting increment
Use in applications where UL compliance is required (restaurants, new construction and most commercial applications).
- Indoor/outdoor rated
- Cost effective lighting for a variety of applications
- Custom cut per your specifications to the nearest 24" cutting increment
- Custom cuts include UL Listed, factory installed power cord and end cap connections (non-extendable)
- Available in nine colors
- Highest quality PVC with UV inhibitor to maximize life and performance
- Includes a replaceable safety electrical fuse.
- Up to 150 foot maximum run distance in any single run.
Series Parallel Wiring
Rope light products in all their various types, whether round, rectangular, LED or incandescent, are wired in series parallel. This means that several individual lamps or LEDs are wired together to equal 12V, 24V or 120V. Then the individual series are wired together to light up in unison. However, the small wires and solder joints that interconnect the individual lamps or LEDs, and the resistors in the case of LED, can be damaged by flexing, impact, high ambient temperatures, among other things.
If one wire, solder joint or resistor fails or breaks, a whole section will not light. Due to the number of elements involved, and the numerous extenuating circumstances beyond our control, American Lighting offers a "standard linear warranty" on most linear lighting products. The conditional warranty offers replacement product by section due to defective material and/or workmanship for the warranty period specified within each linear product category.
120V Incandescent Rope Light - Custom Cut
Color: AM-Amber, BL-Blue, CL-Clear, FR-Frosted, GR-Green, PI-Pink, PU-Purple, RE-Red, YE-Yellow
Bill of Materials
- Determine length needed to the nearest 24" increment.
- Order one ULRL-CONKIT-INCSHELL for each non-extendable run up to 150 feet.
- Order mounting track for straight runs (recommended) and/or mounting clips as needed.
033 Series UL Listed UL2388 UL Compliant Incandescent 1/2" Custom Cut Rope Light
033-XX-C
AM-C = Amber
BL-C = Blue
CL-C = Clear
FR-C = Frosted Sold per Foot
GR-C = Green
PI-C = Pink
PU-C = Purple
RE-C = Red
YE-C = Yellow
ULRL-CONKIT-INCSHELL
UL Listed factory-assembled connector kit for use with Custom Cut 120V 1/2" Rope Light only (required for each length ordered)
DL-TRACK-4
Four foot clear mounting track with UV rating for outdoors; recommended for use with straight line installations
DL-CLIP/SCREW
Clear "U" shaped mounting clip that securely holds rope light in place.
Voltage 120V, 60Hz AC operation
Construction UV resistant clear PVC housing with incandescent lamps spaced every 1.09", vertical mount
Mounting Clear plastic mounting clips or track
Dimensions 1/2" diameter
Cuttability Every 24"
Light output CL = 6.5 lumens per foot
Wattages 4.2 watts per foot
Maximum run 150 feet
Switching Provide switched outlet for On/Off and dimming control
Linking Custom cuts are not linkable. Cutting, splicing or repairing UL2388 custom cuts voids UL
Lamp Specs 25,000 hour rated life, 6.5V, 63mA, 1.09" lamp spacing
Dimmers Switched wall outlets cannot be used with a wall dimmer per the NEC.
Dimmable with most standard incandescent dimmers
Diffuser Clear PVC jacket
Packaging Boxed
Available in Nine Colors
American Lighting 150 foot 120V, 12/24V or Chasing Incandescent Rope Light Reels
120V
MRL- 3/8" diameter 120V Incandescent Rope Light Reel
RL-1/2" diameter 120V Incandescent Rope Light Reel
(18" cut)
Chasing
CRL- 1/2" diameter 120V Chasing Incandescent Rope Light Reel
(36" cut)
12/24V
MRL-CL3/8" diameter 12V Incandescent Rope Light Reel
RL-CL 1/2" diameter 12V or 24V Incandescent Rope Light Reel
12V (2" cut) , 24V (4" cut)
Convenient, interconnectable and economical kits.
The original rope light. Use for all kinds of decorative lighting applications, indoors and outdoors.
- Cost-effective lighting for a variety of applications
- Indoor/outdoor rated
- Dimmable
- Bright, colorful, flexible and versatile linear lighting product
- Field cuttable every 18" (non-rated if cut) for maximum project flexibility
- Available in nine different colors
- Each reel includes one pre-attached "conkit" connections kit, four additional conkits and 50 mounting clips.
Color: AM-Amber, BL-Blue, CL-Clear, FR-Frosted, GR-Green, PI-Pink, PU-Purple, RE-Red, YE-Yellow
Bill of Materials
- Order reel(s) in desired color(s)
- Order additional MRL- or RL-CONKIT conkits if needed (four are included with each reel)
- Review other power accessories such as splice connectors or jumpers and order as needed
- Order mounting track for straight runs (recommended) ; 50 clips included with each reel.
In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube.
MRL-CONKIT, RL-CONKIT
Power connector kit (conkit) with 5' length cord, power connector and end cap; two prong polarized plug (for 120V rope)
MRL-CONKIT-NP, RL-CONKIT-NP
Power connector kit (conkit) with 5' length cord, power connector and end cap; no plug (for low voltage rope)
MRL-SPLICE, RL-SPLICE
Non-UL splice connector, includes power pin connector
MRL-EXTKIT2 RL-EXTKIT2, RL-EXTKIT15
Two foot (MRL- or RL-EXTKIT2) or fifteen foot (MRL- or RL-EXTKIT15) jumper for connecting two sections of rope together, includes two power connectors, white cord
MRL-EXTKIT2
MRL-EXTKIT15
RL-EXTKIT2
RL-EXTKIT15
MRL-INVSPL, RL-INVSPL
Includes two invisible splice connectors and two heat shrink tubes
MRL-PWRCON, RL-PWRCON
Non-UL power connector
MDL-TRACK-4, DL-TRACK-4
Four foot clear mounting track with UV rating for outdoors
DL-CLIP/SCREW
Clear "U" shaped mounting clip that securely holds rope light in place.
Voltage 12V, 24V and 120V, 60Hz AC operation
Construction UV resistant clear PVC housing with incandescent lamps spaced every 1", vertical mount for RL and MRL and horizontal mount for CRL
Mounting Clear plastic mounting clips or track
Bulk Reels 150 feet
Dimensions 1/2" diameter or 3/8" diameter
Cuttability 120V MRL or RL-1/2" diameter 18" cut Chasing CRL- 1/2" diameter 36" cut MRL-CL 12V or RL-CL 12V or 24V; 12V (2" cut) , 24V (4" cut)
Light output CL = 8 lumens per foot
Wattages 5.5 watts per foot
Maximum run 120V = 150 feet, 24V = 32 feet, 12V = 16 feet
Lamp Specs 25,000 hour rated life, 6.5V, 63mA, 1.09" lamp spacing
Dimmers Dimmable with most standard incandescent dimmers
Diffuser Clear PVC jacket
Packaging Boxed
American Lighting LED Neon Flexbrite
American Lighting LED-NF, LED-NFPLUS LED Neon Flexbrite
LED, 120V & 24V
Long lasting, flexible alternative to neon with two performance levels and seven vivid colors. The expanded family of LED Neon Flexbrite includes standard and high output options in seven colors and either 120V or 24V for greater project compatibility. It provides an economical LED solution for coves, architectural lighting, restaurant/bar decor, home theaters, sign lighting and many other linear applications, saving up to 90% in energy costs when compared to traditional neon.
The 24V versions of Economy LED Neon Flexbrite and LED Neon Flexbrite Plus in seven colors have the advantage of smaller cutting increments for more intricate projects. Displays, signage, store fronts and other retail applications, architectural details, home theaters, among others, are good applications for the 24V type.
- Colored jacket highlights color by night and day
- Economy Neon features quality standard brightness LEDs while Neon Flexbrite Plus uses superior grade ultra bright LEDs for enhanced impact
- Continuous line of light, LEDs spaced every 1/2" for Plus version; 5/8" for Economy
- Effective alternative to neon – flexible, durable, non-breakable and produces very little to no heat
- Long-lasting, average lifetime up to 100,000 hours
- Patented, special oval-shaped jacket generates a bright neon-like glow
- Flexible – up to 1-1/2" bending radius
- Available in seven colors: Amber, Blue, Green, Red, Warm White, White and Yellow
120V
120V LED Neon Flexbrite - Reel, 150 foot
LED-(Performance Level) -(Color)
Performance Level: NF = Economy, NFPLUS = Plus
Color: AM-Amber, BL-Blue, GR-Green, RE-Red, WW-Warm White, WH-White and YE-Yellow
Example part number: LED-NF-WW
24V
24V LED Neon Flexbrite - Reel, 150 foot
LED-(Performance Level) -24V-(Color)
Performance Level: NF = Economy, NFPLUS = Plus
Color: AM-Amber, BL-Blue, GR-Green, RE-Red, WW-Warm White, WH-White and YE-Yellow
Example part number: LED-NFPLUS-24V-RE
120V Bill of Materials
- Determine length needed to the nearest average cutting increment (18" for Blue, Green, White and Warm White; 30" for Amber, Red and Yellow)
- Order an LED-NF-CONKIT or LED-NF-CONKIT-PART for each run up to 120 feet for BL, GR, WH and WW; up to 150 feet (reel length) for AM, RE and YE.
- Order one ASSEMBLY for pre-attached cord (non-rated)
- Order power and jumper accessories as needed
- Order aluminum mounting clips as needed or aluminum channel or plastic mounting track for straight runs (or cut into short pieces for use as mounting clips)
In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube.
24V Bill of Materials
- Determine length needed to the nearest average cutting increment
- Order an LED-NF-CONKIT-4A-NP for each run up to maximum run (see details at right).
- Order one ASSEMBLY for pre-attached cord (non-rated)
- Order power and jumper accessories as needed
- Order aluminum mounting clips as needed or aluminum channel or mounting track for straight runs
In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube. UL rated custom cut program only applies to 120V product.
120V Economy Economy Neon Flexbrite
LED-NF-AM AM-Amber Per Foot
LED-NF-BL BL-Blue Per Foot
LED-NF-GR GR-Green Per Foot
LED-NF-RE RE-Red Per Foot
LED-NF-WH WH-White Per Foot
LED-NF-WW WW-Warm White Per Foot
LED-NF-YE YE-Yellow Per Foot
120V Neon Flexbrite Plus
LED-NFPLUS-AM AM-Amber Per Foot
LED-NFPLUS-BL BL-Blue Per Foot
LED-NFPLUS-GR GR-Green Per Foot
LED-NFPLUS-RE RE-Red Per Foot
LED-NFPLUS-WH WH-White Per Foot
LED-NFPLUS-WW WW-Warm White Per Foot
LED-NFPLUS-YE YE-Yellow Per Foot
24V Neon Flexbrite Plus
LED-NF-24V-AM AM-Amber Per Foot
LED-NF-24V-BL BL-Blue Per Foot
LED-NF-24V-GR GR-Green Per Foot
LED-NF-24V-RE RE-Red Per Foot
LED-NF-24V-WH WH-White Per Foot
LED-NF-24V-WW WW-Warm White Per Foot
LED-NF-24V-YE YE-Yellow Per Foot
24V Economy Economy Neon Flexbrite
LED-NFPLUS-24V-AM AM-Amber Per Foot
LED-NFPLUS-24V-BL BL-Blue Per Foot
LED-NFPLUS-24V-GR GR-Green Per Foot
LED-NFPLUS-24V-RE RE-Red Per Foot
LED-NFPLUS-24V-WH WH-White Per Foot
LED-NFPLUS-24V-WW WW-Warm White Per Foot
LED-NFPLUS-24V-YE YE-Yellow Per Foot
Jumper with Power Pin
LED-NF-JUMP3
LED-NF-JUMP6
LED-NFJUMP10
LED-NF-JUMP20
LED-NF-CHAN
1 meter LED Neon Flexbrite aluminum channel (CHAN)
LED-NF-TRACK-4
4 foot grey plastic track
LED-NF-CLIP
Aluminum mounting clip; 5/8" mounting screws included
LED-NF-CONKIT
5' power cord with fused plug, 4A inverter, power connector, 4" section of shrink tube and end cap
LED-NF-CONKIT-4AMP
LED-NF-CONKIT-4A-NP
LED-NF-CONKIT-LTURN
LED-NF-CONKIT-PART
Factory installed 5' power cord with fused plug and end cap (allow 12 weeks lead time) c/UL/us Listed
LED-NF-END
LED Neon Flexbrite end cap, clear
LED-NF-LIN
LED Neon Flexbrite 'L' connector for inside 90° angle (inside sill)
LED-NF-LOUT
LED Neon Flexbrite 'L' connector for outside 90° angle (outside frame)
LED-NF-SPL
LED Neon Flexbrite in-line splice connector; Includes 3" shrink tube
LED-NF-L, LED-NF-T, LED-NF-X
Various accessories include Ls, Ts and Xs (each connector includes power pins and shrink tube)
LED-NF-L
LED-NF-T
LED-NF-X
LED-TR-30-24, LED-TR-60-24
12-30 watt (5-1/2" x 3-1/8" x 1-1/2") or 24-60 watt (9-1/4" x 3" x 3") power supply for outdoor applications, dimmable c/UL/us Listed
LED-TR-30-24
LED-TR-60-24
LED-TR-30-24, LED-TR-60-24
12-30 watt (5-1/2" x 3-1/8" x 1-1/2") or 24-60 watt (9-1/4" x 3" x 3") power supply for outdoor applications, dimmable c/UL/us Listed
LED-DR-24
LED-DR60-24
PS-25-24
1-25 watt power supply for indoor applications, requires AL-PWM-6A (below) for dimming 4" x 3-7/8" x 1-7/16", c/UR/us
PS-60-24
1-60 watt power supply for indoor applications, requires AL-PWM-6A (below) for dimming 6-1/4" x 3-7/8" x 1-1/2" c/UR/us
AL-PWM-6A
Pulse width modulation (PWM) dimmer Fits decora style trim plates and standard junction boxes, 12V and 24V DC input only (not 120V) , 6A output max
Voltage 120V: 60Hz AC operation (1.6A or 4A inverter on cord converts AC power to DC for LEDs) 24V: 60Hz AC operation (1.6A or 4A inverter on cord converts AC power to DC for LEDs)
Construction Heavy-duty flexible colored (AM, BL, GR, RE and YE) or frosted (WH and WW) PVC and 5mm LEDs spaced every 1/2" for Neon Flexbrite Plus; every 5/8" for Economy Neon Flexbrite
Mounting Grey plastic mounting track or aluminum mounting channel or clips
Bulk reels 150 feet
Dimensions H = 1-1/16" (visible, illuminated portion at top is 1/2" tall) , W = 5/8" at base, 9/16" at widest point
Cuttability 120V: Cutting increment averages 30" for AM, RE and YE (actual varies from 29.25" to 30.75") , 18" average for BL, GR and WH (actual varies from 17.5" to 18.5")
24V: 24V Neon Flexbrite Plus: AM, RE and YE cuttable every 4"; BL, GR, WH and WW cuttable every 3" 24V Economy Neon: AM, RE and YE cuttable every 5.9"; BL, GR, WH and WW cuttable every 3.5"
Light output LED-NFPLUS-WH/WW = 46/39 lumens per foot; LED-NF-WH/WW = 33/28 lumens per foot
Wattages 120V: Economy: AM, RE and YE = .96 watt per foot; BL, GR, WH and WW = 1.6 watts per foot
120V: Neon Flexbrite Plus: AM, RE and YE = 1.2 watts per foot; BL, GR, WH and WW = 1.6 watts per foot
24V: Neon Flexbrite Plus: AM, RE and YE = 1.8 watts per foot; BL, GR, WH and WW = 1.92 watts per foot
24V: Economy Neon: RE = 1.8 watt per foot; AM, BL, GR, WH, WW and YE = 1.44 watts per foot
Maximum run 120V: 200 feet for AM, RE and YE; 120 feet for BL, GR, WH and WW
24V: 1.6A max. run 24V Neon Flexbrite Plus: 20 feet for Blue, Green, White, and Warm White, 21 feet for Amber, Red and Yellow
24V Economy Neon: 26 feet for Amber, Blue, Green, White, Warm White and Yellow, 21 feet for Red
LED specs 100,000 hour rated life for all colors except White (50,000 hours) ; 0.05 - 0.07 watt, 5mm, 120° beam angle; WW = 3000K ± 250K, WH = 4500K ± 500K
Dimmers 120V: Switched wall outlet cannot be used with a wall dimmer per the NEC. Dimmable with most CFL/LED (or most electronic low voltage dimmers (minimum loads may apply).
24V: Dimmable with TR and LED-TR with most CFL/LED or low voltage electronic dimmers (minimum loads may apply) ; or PS Series drivers used in conjunction with PWM dimmer (AL-PWM-6A)
Packaging White box (reel) or brown box (custom cuts)
The fixtures are IP-68 rated for submersion in water up to five feet in depth,
UL and CUL Listed for wet locations.
WAC InvisiLED Classic 24-Volt Outdoor Energy Efficient LED Tape Light
WAC InvisiLED Classic 24V Outdoor Energy Efficient LED Tape Light
This outdoor system provides flexible, easy-to-install accent lighting solutions for a broad range of applications. Versatile and adaptable, this system is ideal for numerous outdoor applications such as decks, steps, ponds, fountains, pools, architectural accents and landscapes. InvisiLED Classic 24V Outdoor Tape Light incorporates the latest energy efficient LED technology into a water sealed silicon cased tape, while still delivering crisp, quality light and effortless navigation of curves.
Perfect for outdoor accent and display lighting applications, WAC Lighting introduces the energy saving InvisiLED Classic 24-volt Outdoor system of LED tape lights.
InvisiLED Classic Outdoor System is offered in Amber, Blue, Green, Red and White colors. It is offered with WAC's five-year product warranty.
Kichler Wet Location LED Tape Light
Kichler Wet Location LED Tape Light is rated IP67. It is completely encased and features waterproof connections, helping you bring lighting interest to decks, patios, pool areas and more. Order shorter tape light runs where needed for outdoor/wet projects, then use versatile watertight connectors. Kichler tape light incorporates many installer friendly features such as plug-and-play power supplies and tape light with 3M brand adhesive backing. Kichler offers a large variety of additional accessories to make installations even easier. Wet Location tape mounting clips secure Wet Location tape to the mounting substrate.