Cable Lights

Tiella 800CBL5P Accent 5-Light Cable Kit

800CBL5PN $152.00

Accent Rail Kit (5 Head) Cable Kit with 5 Accent Heads, Matte Nickel, lamps included

Accent Cable Kit 5 Head
100 Watt surface transformer mounts to a standard 4" square junction box with round plaster ring (provided by electrician).

Turnbuckles and anchors can be mounted to the walls or ceiling. When ceiling mounting kit, cables will drop 2" below ceiling. Includes five highly adjustable Accent heads (20 Watts max each) that tilt between the cables and rotate 120° within their rings. The kit may be dimmed with a standard incandescent dimmer.

Finish: Matte Nickel

Eurofase KIT-3JAZ Jazz Standing Man Cable Kit

Height: 5.5" x Width: 5.5" x Length: 192"
3 x 20 watts MR16/C GU5.3 12 volts

Finish: -S5 Satin Nickel
Transformer: Built-in Electronic

Kit includes:

• (3) Jazz cable elements
• (3) 12V/20W MR16 shielded bulbs
• 60W electronic canopy type
• Transformer for hardwire applications
• 33’ of insulated cable for 16’ max run
• Supplied with mounting hardware

Standing man style heads. For canopy mount on hardwire junction box application. Cables tensioned between two vertical surfaces support fixtures and carry power. 3 light all-in-one cable kit. Heads can be positioned anywhere along the cable. Low voltage (12V) open conductors are safe to touch. 33' feet of cable for up to 16' span. Mounting hardware included.

Eurofase KIT-3MOS Mosca Bugs Cable Kit

Height: 14" x Length: 192"
3 x 20 watts JC G4 12 volts

Finish: -04 Satin Nickel
Transformer: Built-in Electronic

Kit includes:

• (3) Mosca cable elements with Frosted and blue glass tails included
• (3) 12V/20W Bi- Pin G4 12V bulbs
• 60W electronic canopy type transformer for hardwire applications
• 33’ of insulated cable for 16’ max. run
• Supplied with mounting hardware

Bug style heads with glass tails and metal wings. For canopy mount on hardwire junction box application. Cables tensioned between two vertical surfaces support fixtures and carry power. 3 light all-in-one cable kit. Heads can be positioned anywhere along the cable. Low voltage (12V) open conductors are safe to touch. 33' feet of cable for up to 16' span. Mounting hardware included.

Above: High-line with Macros Spot fixtures
Uni-plug design allows fixture to be mounted on any lighting system
or ceiling canopy through the use of an appropriate adaptor, not included.

Below: High-line with Butterfly Down fixtures

Bruck High-Line Track System

Select your Fixtures

Cable Length:
Multiply the length of the run by two and add an extra foot. Runs longer than 15ft require the use of kevlar core cable for added strength.

Re-Routers:
Angles and redirection of the cable run requires a re-router.

Supports:
For ceiling mounted runs determine number of ceiling supports. You should allow one intermediate (150516) support for runs over 30' on straight track runs to prevent sag.
Does the run have to overcome major differences in height? If so please specify cable suspensions.

Connectors:
High-Line is a 300W single circuit system; an isolating connector is required
to electrically isolate your cable run into multiple 300W sections.

Power Supply:
Determine the drop from the ceiling to the system. And whether you will be using a Power feed or Canopy feed. Power Feed: Supplies the system from an external transformer used in conjunction with feeder cable.
Canopy Feed: Supply the system from an external transformer in the suspended ceiling. Determine the number of canopy feeds needed by total wattage. Power Supply Cable: For every Power Feed add 15 ft. of cable.

Bruck High-Line Track System >

Start with a Simple Kable Kit
Then add any lights or pendants (not included)

Further customize your design with additional cable, Standoffs and Supports from walls or ceiling to create longer runs or change directions.

Tech Lighting Kable Lite >

Tech Lighting Kable Kits

Simplify your design by starting with a Tech Lighting Kable Kit. Cables can be separated from 2" to 36". Choose any lights or pendants (sold separately) to complete you custom Kable Lite.

You can further customize your design with additional cable, Standoffs and Supports from walls or ceiling to create longer runs or change directions.

All Kable Kits include:

45' of Bare Cable
Enough for a twenty foot wall-to-wall run.
#10 gauge, tinplated copper cable with a kevlar core. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Two Pairs of Slimline Turnbuckles
Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. For short, straight runs (runs under 20'). Mount to wall or ceiling. When ceiling mounted, cables drop 1" from ceiling.

Magnetic Transformer with Power Feed
Choose a 12 volt 150 watt surface transformer, 300 watt surface transformer or 300 watt remote transformer kit.

Tech Lighting 700KLKTS150, 700KLKTA300 Surface Transformer Kable Kits

700KLKTS150 150 Watt Kit from $448.00
3 or 4 pendants or lights.
Add up to three 50 watt elements or up to four 35 or 37 watt elements.

700KLKTA300 300 Watt Kit from $600.00
Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Surface Transformer mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire feeds.

Finish: Chrome, Satin Nickel, White with Chrome, White with Satin Nickel

Tech Lighting LKTA300 Remote Transformer Kable Kit

LKTA300 300 Watt Remote Transformer Kable Kit $488.00
Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Remote Transformer installs in an accessible location behind the ceiling or wall. Canopy mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire leads.

Finish: Chrome, Satin Nickel

Top Row: K-Bye-Bye, K-Giro with Mesh Backflight Shield Accessory
Center Row: K-Hello, K-Jane, K-Telescope with Backlight Shield Accessory
Bottom Row: K-Johnny with Lil Wok Accessory, K-Pivot

Above: Kable Lite with K-Hello Elements
Below: Tech Lighting Metal Man >

Tech Lighting Kable Lite with K-Hello Head Elements and K-Bye-Bye Head Elements with Amber Round Glass Shield Accessories

Tech Lighting Kable Lite

Tech Lighting Systems Kable Lites are completely customizable.

Low-voltage heads or pendants are suspended from two parallel cables that virtually disappear while the fixtures appear to almost float in the space. Kable Lite is a flexible solution particularly suited for high ceilings making the fixtures themselves take center stage.

Choose your layout.

• Cables can span up to 20 feet without additional support.
• Add Standoffs and Supports from walls or ceiling to create longer runs or change directions.
• Cables can be separated from 2" to 36".

Choose your lights.

Select from an array of decorative pendants, architectural heads and functional art lighting.

Select your transformer.

Add up the wattage from the lights you have chosen. Choose 12 or 24 volt. Then select a visible surface mount transformer or a hidden remote transformer.
Kits come complete with a 12 volt 150 watt surface transformer, 300 watt surface transformer or 300 watt remote transformer.

Give us a call at 800-585-1285. We would be happy to help you design your own custom cable layout.

(Or start with your pendants, fixtures and accessories, then decide which layout will support them.)

Tech Lighting Kable Lite >

Kable Lite with Biz Pendants

Pendants suspended from Tech Lighting Kable Lite or MonoRail are an ideal way to light an island or counter. There are 41 different Pendant options available for Tech Lighting Kable Lite System.