Contemporary Ceiling Fans

FP8000PN (1) polished nickel finish fan with opal frosted glass and reversible cherry/walnut finish wood blades

The Akira Ceiling Fan by Fanimation FP8000

Call 800-585-1285 or E-mail [email protected]!
Ask about additional Discounts and Sales!

Unexpected Design, Captivating Lines
The Akira by Fanimation is a masterful blend of cosmopolitan appeal with classical function. The Akira’s subtle sophistication is highlighted by five richly hued wood blades available in mahogany/walnut or cherry/walnut finishes. The Akira perfectly complements any room and comes complete with an integrated light kit featuring opal frosted glass and one 100-watt halogen minican bulb. In addition to its exquisite exterior, The Akira is brilliantly designed with three forward and reverse speeds, sloped ceiling mount capabilities and remote control operation. If you are looking for refined sophistication, your search should end with The Akira.

• Available in oil-rubbed bronze finish with reversible mahogany/walnut finish wood blades and pewter finish with reversible cherry/walnut finish wood blades
• Light kit with opal frosted glass and one 100-watt halogen minican bulb included
• Matching cap to cover light is included
• Fan rated for dry locations only
• 52" blade sweep
• 13 degree blade pitch
• Downrod included - 1" diameter by 4.5" length, longer lengths available
• Ceiling slope to 30 degrees
• Three forward and three reverse speeds
• C24 hand-held non-reversing remote control included
• Optional Controls sold seperately
• Optional close-to-ceiling kit sold seperatley

FP7900MG (1) metro gray finish fan with opal frosted glass

FP7900OB (1) oil-rubbed bronze finish fan with opal frosted glass

Fanimation's Torto Ceiling Fans

A new twist on an old friend. Put a new twist on things by adding this unique, three bladed design to your interior. The Torto is sure to be the much envied center piece of your room.

• Important: The Torto's airflow pattern is not that of your typical ceiling fan. It pushes air at an angle, not straight down..
• Available in metro gray and oil-rubbed bronze finishes with opal frosted glass
• Fan rated for dry and damp locations
• 52" blade sweep
• Varying blade pitch
• Two 60-watt candelabra bulbs included
• Ceiling Slope to 30 degrees
• Downrod included 1" diameter x 6" length, longer downrods available
• Three forward, three reverse speeds
• C20 hand-held reversing remote control included
• Optional controls sold seperately
• UL LISTED

Fanimation's Torto Ceiling Fan's airflow is just as distinctive as its styling. The Torto's airflow pattern is not that of your typical ceiling fan. It pushes air at an angle, not straight down. You will feel far more air flow when you stand next to it than when you are directly underneath it.

The above picture illustrates. As with any fan, airflow is increased if the fan is installed with a longer downrod.

Above: FP4520OB (1) oil-rubbed bronze finish fan with reversible cherry/walnut finish wood blades
Below: FP4520OB (1) oil-rubbed bronze finish fan with reversible cherry/walnut finish wood blades LK4520OB (1) oil-rubbed bronze light kit with opal glass (sold separately)

Fanimation's Involution Ceiling Fans

The Art of Illusion: A revolution in ceiling fans. The Involution™ will capture your imagination. Classic lines, modern design with a twist.

The Involution by Fanimation is the minimalist masterpiece of ceiling fan design. The Involution’s two fan blades create a symmetrical form that is the embodiment of modern art. The Involution’s contemporary design is augmented by decorative rings that attach to the fan base to create an optical illusion while the fan is running. The Involution is available in oil-rubbed bronze and satin nickel finishes and includes cherry/walnut blades. The Involution includes a 6" downrod and can accommodate a ceiling slope up to 30 degrees. For rooms with low ceilings, The Involution can be purchased with an optional close-to-ceiling kit for a more snug fit.

• Available in oil-rubbed bronze finish with oil-rubbed bronze decorative rings and satin nickel finish with satin nickel decorative rings
• Rings are included but optional
• Reversible cherry/walnut blades included
• Optional light kit with opal glass available in oil-rubbed bronze finish LK4520OB and satin nickel finish LK4520SN - sold separately. Light kit requires additional control (C2, C4FL)
• 52" blade sweep
• 153 x 15 motor with limited lifetime warranty
• 14° blade pitch
• Four forward and four reverse speeds, reversing switch located inside lower cover
• Fan rated for dry locations only
• 6" x 1" downrod included - longer lengths available
• Includes four-speed wall control (CW40) (fan only)
• Weighs 20 lbs
• UL listed
• Ceiling Slope 30° (up to 52° with SCB1-52)
• 80" lead wires
• Patent Pending

Above: FP4520SN (1) satin nickel finish fan with reversible cherry/walnut finish wood blades B4500SN (1) 24" satin nickel finish blades (sold separately)
Below: FP4520SN (1) satin nickel finish fan with reversible cherry/walnut finish wood blades

Above: FP8026OB (1) oilr-rubbed bronze finish fan with frosted acrylic blades
Below: FP8026OB (1) oil-rubbed bronze finish fan with frosted acrylic blades
Fan may be flush mounted or mounted using downrods

Fanimation's Marea Ceiling Fans

The Marea by Fanimation provides functional art on your ceiling! After you’ve invested in the perfect furnishings for your contemporary-style home, this ultra-modern ceiling fan adds the crowning touch. Circulating air with its distinctive, single white frosted blade, the Satin Nickel/Oil-Rubbed Bronze finish coordinates beautifully with similar finishes in the house. The Marea comes equipped with a hand-held remote and a wall-mount control. The 3 forward and reverse speeds provide just the right amount of comfort year-round. The 42-inch blade sweep is ideal for bedrooms, living spaces and sunrooms. All Fanimation motors are protected by a limited lifetime warranty.

• Available in Oil-rubbed bronze and satin nickel
• Blades are included
• 153 x 25 motor
• 42" blade sweep
• 3 forward and 3 reverse speeds (reversing switch on housing)
• TR33 hand-held remote with wall mount
• 2 sets of double downrods included (12" or 36")
• Dry location rated only
• Hanging WeightL 25.13 lbs
• UL listed

FP8026SN (1) satin nickel finish fan with frosted acrylic blades

FP4620OB (1) oil-rubbed bronze finish fan with reversible cherry/walnut finish wood blades

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades
LK4620SN (1) satin nickel finish light kit with opal glass (sold separately)

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades

Fanimation's Zonix Ceiling Fans

Modern Sophistication. Modern. Clean. Beautiful. The Zonix, features three sleek, reversible wood blades and is available in satin nickel and oil-rubbed bronze.

• Available in satin nickel and oil-rubbed bronze finish
• Reversible cherry/walnut blades included
• 54" blade pitch
• 153 x 18 motor
• 14° blade pitch
• 4 speed wall control included (CW40)
• Fan rated for dry locations only
• Reversing switch on fan housing
• Optional light kit with opal glass available in oil-rubbed bronze finish LK4620OB and satin nickel finish LK4620SN sold separately. Light kit requires additional control (C2 C4FL)
• Also accepts standard fitters and light kits
• 6" x 1" downrod included
• Includes CW40 4-speed wall control (fan only)
• UL listed 
• Ceiling Slope to 30 degrees (up to 52 degrees with SCB1-52)
• 80" lead wires
• Patent Pending

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades

FP4630SN (1) satin nickel finish fan with satin nickel blades

FPS7880OB (1) oil-rubbed bronze finish fan with opal frosted glass
HA7880CY (1) cherry finish woven housing accessory

FPS7880SN (1) satin nickel finish fan with opal frosted glass
Shown with woven housing accessory

FPS7880SN (1) satin nickel finish fan with opal frosted glass

Fanimation's Inlet Ceiling Fans

Cool Lines, Cool Breezes. Finally, a cool, sleek and functional, close-to-the-ceiling fan, with so much flair that allows you to enjoy the cool breezes in any room of your house.

• Available in oil-rubbed bronze and satin nickel finishes with opal frosted glass
• Reversible cherry/walnu blades included
• Fan rated for dry locations - damp location rated when used with BPW7880CY, BPW7880WA or BPW7880SN blade sets (sold seperately)
• One 18-watt GU24 CFL light bulb included
• 52" blade sweep with blade set included
• 42" blade sweep with optional 18" blade sets
• 14 degree blade pitch
• Fan mounts flush to ceiling and does not require use of a downrod
• Distance from ceiling is 8 3/8" and distance from ceiling to bottom of fan is 11 1/2"
• Three forward and three reverse speeds
• C20 hand-held reversing remote control included
• Optional controls sold seperately
• Patents Pending
• UL LISTED

FPS7880OB (1) oil-rubbed bronze finish fan with opal frosted glass
BPW7880WA (1) 18" walnut finish all-weather composite blade

FPS7880SN (1) satin nickel finish fan with opal frosted glass
B7880SN (1) 23" satin nickel finish blade

FPS7880SN (1) satin nickel finish fan with opal frosted glass

FPS7880SN (1) satin nickel finish fan with opal frosted glass
HA7880CY (1) cherry finish woven housing accessory

Above: Mach One, Gloss Black finish, Gloss Black ABS blades
Below: Mach One, Titanium finish, Titanium ABS blades

Mach One, White finish, White ABS blades

Monte Carlo Mach One Modern Ceiling Fan 3MO52

Finish: Gloss Black finish, Gloss Black ABS blades
Titanium finish, Titanium ABS blades
White finish, White ABS blades

Airflow: 5,873 CFM
Electricity Use: 71 watts
Airflow Efficiency: 83 CFM/watt

Product Details

• Premium power 172 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 13 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling Installation: with longer downrods.
• Includes Wall Remote With Uplight with downlight.
• Monte Carlo Limited Lifetime Warranty.

Above: Mach Two, Titanium finish, Titanium ABS blades
Below: Mach Two, White finish, White ABS blades

Monte Carlo Mach 2 Modern Ceiling Fan 3MTR38

Finish: Titanium finish, Titanium ABS blades
White finish, White ABS blades

Airflow
3,973 CFM Electricity Use
61 watts Airflow Efficiency
65 CFM/watt

Product Details

• Premium power 172 X 14 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 13 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling Installation: with longer downrods.
• Includes Wall Remote With Uplight with downlight.
• Monte Carlo Limited Lifetime Warranty.

Monte Carlo 56" Hartley Fan Brushed Steel Modern Ceiling Fan 3MTR38

Finish: Brushed Steel
Blade Finish: Silver / Silver
Glass: Acid Frosted
Light Kit: 3 Candelabra 40w Max. (included)
Height: Fan: 17 29/32''
Min. Ceiling Height: 7 7/8'
Weight: 24.64 lbs.
Blade Pitch: 14°
Listings: UL / cUL Listed

Airflow 5,056 CFM
Electricity Use 65 watts
Airflow Efficiency 78 CFM/watt

Product Details

• Premium power 188 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 14 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling Installation: with longer downrods.
• Includes Wall Remote With Uplight with reverse and downlight.
• Monte Carlo Limited Lifetime Warranty.

Above: BL52W White Bloom with 52" Green and Pink Blades
Below: BL52W White Bloom with 52" Pink Blades

Integrated light kit

Craftmade BL52 Bloom Ceiling Fan

BL52W Retail Price: $288.00

It's all about flowers, fun and motion with this whimsical addition to your child's space or any eclectic or fun room.

Specs
Blade Sweep: 52"
Number of Blades: 10
Blade Pitch: 13.5°
Motor Size (mm): 188 x 15
Amps (High Speed): 0.42
Watts-Electricity Use* (High Speed): 49
RPM (High-Med-Low): 162-117-63
Shipping Wt. (lbs): 33.38
Carton Size (Cuft.): 2.47
Airflow* (Cubic Feet per Minute): 4202
Airflow Efficiency* (Cubic Feet per Minute per Watt): 86

Features
Heavy Duty, 3 Speed Reversible Motor
6" Downrod (included)
Limited Lifetime Warranty
Blades Sold Separately
Integrated Light Kit (2-GU24-27K CFL Bulbs Included)
TCS Remote Control (included)
TCS Plus Wall Control Available (Optional)
Compare: 49" to 60" ceiling fans have airflow efficiencies ranging from approximately 51 to 176 cubic feet per minute per watt at high speed.

Available Finishes
Finish: W White

Blade Options
Model Specific - All Available Options Shown Left

Light Kit Options
Integrated Light Kit

Remotes
TCS-PLUS Wall Control (Optional)
TCS Remote Control (included)

Monte Carlo 66" or 52" Lunar Modern Ceiling Fan 3LRR

Finish: Titanium or White
Blade Finish: Titanium ABS or White ABS
Glass: Matte Opal
Light Kit: 1 GU24 18w Max. (included)
Height: Fan: 19 5/16''
Min. Ceiling Height: 7 31/32'
Weight: 23.32 lbs.
Blade Pitch: 25°
Listings: UL / cUL Listed

Airflow 6,890 CFM
Electricity Use 69 watts
Airflow Efficiency 100 CFM/watt

Product Details

• Premium power 188 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 25 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling Installation: with longer downrods.
• Includes Wall Remote With Uplight with reverse and downlight.
• Blanking plate included for installations without light kit.
• Monte Carlo Limited Lifetime Warranty.