Hadco Advent & Mushroom Path Lights

Above: Hadco MSL12
Below: MSL18 Advent Low Voltage Die-cast Aluminum Path Lights

Hadco MSL Advent Low Voltage Die-cast Aluminum Path Lights

MSL12
Height: 13 1/2" (343mm)

MSL18
Height: 19 1/2" (495mm)

Housing: Die-cast aluminum. Hidden fasteners and aluminum stem. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 4 1/2" (114mm)

Hadco MUL4 5" Small Mushroom Die-cast Aluminum Low Voltage PathLyte

MUL4-A Black
MUL4-G Verde
MUL4-H Bronze
MUL4-T Speckled Stone
MUL4-U Sienna
Housing: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

MUL4-N Natural Brass
MUL4-OB Oiled Brass
Housing: Solid brass stem. Die-cast brass. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.

Available Bulk Pack Black, Verde or Bronze
Mushroom Pathlight Bulk (25 units)
Mushroom Pathlight Bulk (25 units) with Stake

Mushrooms offer classic styling and a graceful appearance making them suitable for most applications. Designed as a spread light, these luminaires produce a uniform light pattern with no objectional glare. Finishes are available in antiqued verde, bronze, sienna, speckled stone, Black and natural cast bronze.

OPTICAL ASSEMblY: Spun aluminum reflector with white thermoset powdercoat. Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 19 1/2" (495mm)
Width: 5 1/16" (129mm)

Hadco ML4D 5" LED Mushroom PathLytes

ML4D LED Mushroom (COOL)
Lamping: Philips Lumiled Rebel, Cool White (6,000K)

ML4DW LED Mushroom (WARM)
Lamping: Philips Lumiled Rebel, Warm White (3,000K)

Housing: Cool external temperatures - all below 43ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (74ºC for coated metal, 80ºC for glass) and 4 seconds (61ºC for coated metal, 70ºC for glass) of contact. Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Electrical Assembly: OptoElectronix electronic LED driver. UL Class 2 -10°C to 50°C mimum starting temperature. Internal surge protector built into LED driver circuit Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. Connects directly to 12V AC or 12V DC power source. Low voltage transformer must be ordered to power the fixtures. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
IP RATING: IP66: Dust-tight and sealed against direct jets of water.
Height: 19 1/2" (495mm)
Width: 5 1/16" (129mm)

More Hadco LED Path Lights >

Above: MUL5 Mushroom PathLyte in Die-cast brass with tumble polished Natural Brass finish
Below: MUL5-H Bronze in Die-cast aluminum with thermoset polyester powdercoat finish

Hadco MUL5 9" Low Voltage Mushroom PathLyte

MUL5-A Black
MUL5-G Verde
MUL5-H Bronze
MUL5-T Speckled Stone
MUL5-U Sienna
Housing: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
WARRANTY: Three-year limited warranty.

MUL5-N Natural Brass
MUL5-OB Oiled Brass
Housing: Die-cast brass. Solid brass stem. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.
WARRANTY: Lifetime limited warranty.

Mushrooms offer classic styling and a graceful appearance making them suitable for most applications. Designed as a spread light, these luminaires produce a uniform light pattern with no objectional glare. Finishes are available in antiqued verde, bronze, sienna, speckled stone, Black and natural cast bronze.

OPTICAL ASSEMblY: Spun aluminum reflector with white thermoset powdercoat. Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal.
Lamping: 35W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 25" (635mm)
Width: 9" (229mm)

Above: MU5 Mushroom PathLyte in Die-cast brass with tumble polished Natural Brass finish
Below: MU5-H Bronze in Die-cast aluminum with thermoset polyester powdercoat finish

Hadco MU5 9" Line Voltage Mushroom PathLyte

MU5-A Black
MU5-G Verde
MU5-H Bronze
MU5-T Speckled Stone
MU5-U Sienna
Housing: Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
WARRANTY: Three-year limited warranty.

MU5-N Natural Brass
MU5-OB Oiled Brass
Housing: Die-cast brass. Solid brass stem. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.
WARRANTY: Lifetime limited warranty.

Mushrooms offer classic styling and a graceful appearance making them suitable for most applications. Designed as a spread light, these luminaires produce a uniform light pattern with no objectional glare. Finishes are available in antiqued verde, bronze, sienna, speckled stone, Black and natural cast bronze.

OPTICAL ASSEMblY: Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal. Underside of roof has white reflector, with center ALZAK© reflector for optimal light distribution.
Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 25" (635mm)
Width: 9" (229mm)