 Hadco
AL41 Cast Aluminum Architectural Mushroom Path Light with
Seedy Glass Finial
Finial is a clear seeded glass that sparkles when illuminated.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with
fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 Volt fixture
is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
Hadco
AL41D3 Cast Aluminum LED Architectural Mushroom Path Light
with Seedy Glass Finial
Finial is a clear seeded glass that sparkles when illuminated.
Lamping: Philips Lumiled Rebel, Cool White (6,000K) Lamp
is included with fixture. Electrical Assembly: OptoElectronix electronic LED driver.
UL Class 2 -10°C to 50°C mimum starting temperature. Internal
surge protector built into LED driver circuit Input voltage
range (VAC): 10.8 - 17.0. 6.5 total watts consumed. Connects
directly to 12V AC or 12V DC power source. Low voltage transformer
must be ordered to power the fixtures. 12 Volt fixture is
pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire.
Low voltage quick connector, catalog #LVC3 included for easy
hook-up to the low voltage supply cable, not included. 12
Volt system requires remote transformer, not included.
More Hadco LED Path
Lights >
Built to last with die-cast aluminum housing, stainless
steel hinge and spring latch, it provides simple, tool-less
entry. Which means maintenance without a screwdriver, and
with no screws to lose.
Housing: Die-cast aluminum. Stem is extruded aluminum. Roof
has dual stainless steel hinge with stainless steel spring-lock
for tool-less entry and relamping. Finial is a clear seeded
glass that sparkles when illuminated. 1/2" NPS male threads
to screw onto accessory mounting stake or junction box, sold
separately.
Finish: Thermoset polyester powdercoat is electrostatically
applied after a five-stage conversion cleaning process and
bonded by heat fusion thermosetting. Laboratory tested for
superior weatherability and fade resistance in accordance
with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Frosted tempered glass sprinkler shield
includes top and bottom silicone gaskets for tight seal.
Spun aluminum reflector with white thermoset powdercoat.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 20 3/8" (518mm)
Width: 7 1/4" (183mm) |
