Path Lights - Bollards

Hadco DB14 Cast Aluminum Round Top Bollard

Finish

• (A) Black
• (H) Bronze
• (L) Limestone
• (S) Sandstone
• Custom Colors Available

Housing: 356 HM high-strength, low-copper, proprietary cast aluminum alloy . Dome roof with die-cast aluminum louvers. Easy access to lamp. 5" dia. Extruded aluminum with a wall thickness of 0.125". All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Symmetric. Die-cast aluminum louvers with underside painted with highly reflective white powdercoat. Tempered glass globe.
Lamping: Incandescent Medium Base A19. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
Installation: & Mounting: Tube is mounted to the base plate with three (3) 5/16-18 flat head allen key stainless steel tamper-resistant screws.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 14" (36cm)
Width: 6" (15cm)
Bolt Circle: 3" (8 cm)
Anchor Rods: Internal (3) 3/8" dia. x 8" long (1 cm x 20cm)
Base Diameter: 5" (13cm)

Hadco DB21 Cast Aluminum Round Top Bollard

Finish

• (A) Black
• (H) Bronze
• Custom Colors Available

Housing: 356 HM high-strength, low-copper, proprietary cast aluminum alloy . Dome roof with die-cast aluminum louvers. Easy access to lamp. 5" dia. Extruded aluminum with a wall thickness of 0.125". All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Symmetric. Die-cast aluminum louvers with underside painted with highly reflective white powdercoat. Tempered glass globe.
Lamping: MH and HPS Medium base: E17. Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). Electrical Assembly: Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy Installation: and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base.
BALLAST: All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
Installation: & Mounting: Tube is mounted to the base plate with three (3) 5/16-18 flat head allen key stainless steel tamper-resistant screws.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 21" (53cm)
Width: 6" (15cm)
Bolt Circle: 3" (8 cm)
Anchor Rods: Internal (3) 3/8" dia. x 8" long (1 cm x 20cm)
Base Diameter: 5" (13cm)

Hadco DB30 Aluminum Bollard

Finish

• (A) Black
• (H) Bronze
• Custom Colors Available

Housing: 356 HM high-strength, low-copper, proprietary cast aluminum alloy . Dome roof with die-cast aluminum louvers. Easy access to lamp. 5" dia. Extruded aluminum with a wall thickness of 0.125". All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Symmetric. Die-cast aluminum louvers with underside painted with highly reflective white powdercoat. Tempered glass globe.
Lamping: MH and HPS Medium base: E17. Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). Electrical Assembly: Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy Installation: and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base.
BALLAST: All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
Installation: & Mounting: Tube is mounted to the base plate with three (3) 5/16-18 flat head allen key stainless steel tamper-resistant screws.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 30" (74cm)
Width: 6" (15cm)
Bolt Circle: 3" (8 cm)
Anchor Rods: Internal (3) 3/8" dia. x 8" long (1 cm x 20cm)
Base Diameter: 5" (13cm)

HB1 Anchor Base
HBB1-A Direct Burial
Line Voltage

Hadco HB1 Anchor Base, HBB1-A Direct Burial Cast Aluminum Line Voltage Round Bollard PathLyte

HB1 Anchor Base 120 Volt
Installation: & Mounting: Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template.
HBB1 Direct Burial 120 Volt
Installation: & Mounting: Direct burial post. 

Housing: All cast aluminum construction. 4" dia. Extruded aluminum post (1/8" wall).
Finish: Black or bronze thermoset powdercoat.
Lamping: 40W maximum A19 lamp. Lamp is not included. Higher wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with 18 AWG Black, white and ground wires.
Optical Assembly: Opal polycarbonate cylinder.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 32 5/8" (829mm)
Width: 4 1/2" (114mm)

HBL1 Anchor Base
HBBL1 Direct Burial
Line Voltage

Hadco HBL1 Anchor Base, HBBL1 Direct Burial Cast Aluminum Low Voltage Round Bollard PathLyte

HBL1 Anchor Base 12 Volt
Installation: & Mounting: Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. 
HBBL1 Direct Burial 12 Volt
Installation: & Mounting: Direct burial post. 

Housing: All cast aluminum construction. 4" dia. Extruded aluminum post (1/8" wall).
Finish: Black or bronze thermoset powdercoat.
Optical Assembly: Opal polycarbonate cylinder.
Lamping: 18W maximum wedge base T-5 Xenon. Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 32 1/2" (826mm) above ground
Width: 4 1/2" (114mm)
Max. Weight: 10 lb.

Hadco RB30 Aluminum Line Voltage Horizon Bollard

Housing: Die-cast aluminum. Constructed of 5" diameter extruded aluminum (1/8" wall). Head assembly is mounted to lower housing with three (3) stainless steel screws. Fasteners are 300 Series stainless steel. gasketing is silicone.
Finish: Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: Clear molded glass lens. Highly reflective white paint on spun aluminum rings, mounted on the underside of louvers. Electrical Assembly: 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy Installation. Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).
Installation: & Mounting: VOLTAGE CAUTION: Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8'. Check with local authorities before specifying alternate voltages. Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 32 1/4" (818mm)
Width: 10 1/8" (257mm)

Coordinating Hadco Horizon Path Lights >

Hadco R30 Small Horizon Contemporary Bollard Path Light

Housing: Die-cast aluminum. Extruded aluminum direct burial pole, 55" overall length. Fasteners are 300 Series stainless steel. gasketing is diecut neoprene.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: Clear molded glass lens.
Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white and ground wires.
Installation: & Mounting: Direct burial in ground to a depth of 18".
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001: 2000 Standards. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 37" (940mm)
Width: 10 1/8" (257mm)

Coordinating Hadco Horizon Path Lights >

Hadco RB71 Aluminum Line Voltage Bollard

Finish

• (A) Black
• (H) White
• (G) Verde
• (H) Bronze
• (J) Green
• Custom Colors Available

Housing: Die-cast zinc. Removable head . Easy access to lamp. 6" dia. Extruded aluminum with a wall thickness of 0.125" . A weatherproof ballast assembly isolates the ballast from water and heat for longer life. All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Asymmetric. Cylindrical tempered glass refractor lens. Integral shield limits light distribution to a 180° pattern.
Lamping: Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). 70W maximum T6 MH. MH and HPS Medium base: E17. Lamp is not included. Electrical Assembly: Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy Installation: and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads.
BALLAST: T6 Metal Halide lamp uses an electronic ballast. All other HID ballasts are core and coil. Ballasts are factory pre-wired and tested and mounted to a removable tray with quick-disconnect for easy Installation. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
Installation: & Mounting: Internal cast aluminum base plate is secured to anchor foundation by three (3) 3/8-16 x 8" galvanized steel bolts and stainless steel nuts in a 3" bolt circle. (Use factory supplied template.). A twist-lock action mates the base plate casting with lower bollard casting, which is welded to the bottom of the bollard extrusion. One set screw is used to secure the bollard to the base plate.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 35" (89cm)
Width: 6 11/16" (17cm)
Bolt Circle: 3" (8cm)
Anchor Rods: Internal. (3) 3/8" dia. x 8" long (1cm x 20cm)
Base Diameter: 6" (15cm)

Hadco RL72 Aluminum Line Voltage Bollard

Finish

• (A) Black
• (H) White
• (G) Verde
• (H) Bronze
• (J) Green
• Custom Colors Available

Housing: 360 low-copper die-cast aluminum alloy. Removable head . Easy access to lamp. 6" dia. Extruded aluminum with a wall thickness of 0.125" . A weatherproof ballast assembly isolates the ballast from water and heat for longer life. All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Symmetric. Die-cast aluminum louvers with tempered ribbed glass globe.
Lamping: Lamp is not included. 70W maximum T6 MH. MH and HPS Medium base: E17. Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). Electrical Assembly: Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy Installation: and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base.
BALLAST: T6 Metal Halide lamp uses an electronic ballast. All other HID ballasts are core and coil. Ballasts are factory pre-wired and tested and mounted to a removable tray with quick-disconnect for easy Installation. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
Installation: & Mounting: Internal cast aluminum base plate is secured to anchor foundation by three (3) 3/8-16 x 8" galvanized steel bolts and stainless steel nuts in a 3" bolt circle. (Use factory supplied template.). A twist-lock action mates the base plate casting with lower bollard casting, which is welded to the bottom of the bollard extrusion. One set screw is used to secure the bollard to the base plate.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 36" (91cm)
Width: 6 11/16" (17cm)
Bolt Circle: 3" (8cm)
Anchor Rods: Internal. (3) 3/8" dia. x 8" long (1cm x 20cm)
Base Diameter: 6" (15cm)

Hadco RR70 Aluminum Line Voltage Bollard

Finish

• (A) Black
• (H) White
• (G) Verde
• (H) Bronze
• (J) Green
• Custom Colors Available

Housing: Die-cast zinc. Removable head . Easy access to lamp. 6" dia. Extruded aluminum with a wall thickness of 0.125" . A weatherproof ballast assembly isolates the ballast from water and heat for longer life. All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. For larger projects where a custom color is required, contact the factory for more information.
Optical Assembly: Symmetric. Die-cast zinc vertical louvers with tempered glass refractor bowl.
Lamping: Lamp is not included. 70W maximum T6 MH. MH and HPS Medium base: E17. Incandescent Medium Base A19. 26W CFL (GX24Q-3). 32W CFL (GX24Q-3). 42W CFL (GX24Q-4). Electrical Assembly: Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy Installation: and removal. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base.
BALLAST: T6 Metal Halide lamp uses an electronic ballast. All other HID ballasts are core and coil. Ballasts are factory pre-wired and tested and mounted to a removable tray with quick-disconnect for easy Installation. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
Installation: & Mounting: Internal cast aluminum base plate is secured to anchor foundation by three (3) 3/8-16 x 8" galvanized steel bolts and stainless steel nuts in a 3" bolt circle. (Use factory supplied template.). A twist-lock action mates the base plate casting with lower bollard casting, which is welded to the bottom of the bollard extrusion. One set screw is used to secure the bollard to the base plate.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 35" (89cm)
Width: 6 11/16" (17cm)
Bolt Circle: 3" (8cm)
Anchor Rods: Internal. (3) 3/8" dia. x 8" long (1cm x 20cm)
Base Diameter: 6" (15cm)

Hadco SB1, SBB1, SBBL1, SBL1 Cast Aluminum Line Voltage or Low Voltage Square Bollard

Finish: (A) Black, (H) Bronze
Finish: Black or bronze thermoset powdercoat.

SB1 Square Bollard 120v 40W a19
SBB1 Square Bollard Direct Burial 120v 40W a19
Lamping: 40W maximum A19 lamp. Lamp is not included. Higher wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with 18 AWG Black, white and ground wires.

SBL1 Square Bollard 12v 18W T5
SBBL1 Square Bollard Direct Burial 12v 18W T5
Lamping: 18W maximum wedge base T-5 Xenon.  Lamp is included with fixture.  Xenon lamp life is approximately 10,000 hours.  Higher wattages may be used only with glass panels installed. Electrical Assembly:   Wedge base socket type (T3-1/4 or T5).  12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG.  Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included.  12 Volt system requires remote transformer, not included. 

Housing: All cast aluminum construction. Cast aluminum roof and cage bottom. Extruded aluminum cage legs.  4" sq. Extruded aluminum post (1/8" wall).
Optical Assembly: Opal polycarbonate panels.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.

SB1 Square Bollard 120v 40W a19
SBL1 Square Bollard 12v 18W T5
Installation: & Mounting: Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template.
Height: 32 1/8" (816mm)
Width: 4 3/8" sq. (111mm)

SBBL1 Square Bollard Direct Burial 12v 18W T5
SBB1 Square Bollard Direct Burial 120v 40W a19
Installation: & Mounting: Direct burial post.
Height: 35 1/8" (892mm) above ground
Width: 4 3/4" (121mm)