Hadco B1 Brass Small BulLyte

Housing: Die-cast brass. Fully rotatable shroud, gasketed die-cast brass. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. gasketing is silicone. Fasteners are 300 series stainless steel.
Finish: Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-Aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 100W maximum PAR20/R20 medium base lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 7/8" (98mm)
Length: 8 3/16" (208mm)

Power Consoles, Transformers & Accessories >

Hadco B3 Medium BulLyte in Die-cast Aluminum

Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. Fully rotatable shroud, gasketed, cast aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 100W maximum PAR30/R30 medium base lamp. Lamp is not included. Lower wattage lamps are acceptable. HID PAR30 MH or MV acceptable with remote ballast (not included). Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 5 5/16" (135mm)
Length: 9 1/2" (241mm)

Power Consoles, Transformers & Accessories >

Hadco B4 Large BulLyte in Die-cast Aluminum

Housing: Fully rotatable shroud, gasketed, cast aluminum. Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. Shroud is optional. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear Tempered flat glass lens (glass comes with shroud)
Lamping: 300W maximum PAR38/R40 incandescent lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
CERTIFICATIONS: Manufactured to ISO 9001:2000 Standards. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
WARRANTY: Three-year limited warranty.
Width: 6 1/4" (159mm)
Length: 8-9/16" 218mm, (S)10-3/16" 259mm,(L)16-1/2" 419mm

Power Consoles, Transformers & Accessories >

Hadco B4 Brass BulLyte w/Shroud

Housing: Die-cast brass. Fully rotatable shroud, gasketed die-cast brass. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-Aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.
OPTICAL ASSEMblY: Clear tempered flat glass lens.
Lamping: 300W maximum PAR38/R40 incandescent lamp. HID PAR38 MH or MV acceptable with remote ballast (not included). Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001:2000 Standards. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Width: 6 1/4" (159mm)
Length: 13" (330mm)

Power Consoles, Transformers & Accessories >

Hadco Small Cast-Aluminum BulLyte BL1

Housing: Die-cast aluminum. Fully rotatable shroud, gasketed, cast aluminum. Fasteners are 300 series stainless steel. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 75W maximum MR16 bi-pin lamp. Covered MR16 are recommended to protect lamps inner capsule. Lower wattage lamps are acceptable. Lamp is not included. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 7/8" (98mm)
Length: 8 1/2" (216mm)

Power Consoles, Transformers & Accessories >

Hadco Small Brass BulLyte BL1

Housing: Die-cast brass. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fully rotatable shroud, gasketed die-cast brass. Fasteners are 300 series stainless steel.
Finish: HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-Aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique. Natural Brass (N) is as-cast and tumble polished.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: Lamp is not included. Covered MR16 are recommended to protect lamps inner capsule. 75W maximum MR16 bi-pin lamp. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 7/8" (98mm)
Length: 8 3/16" (208mm)

Power Consoles, Transformers & Accessories >

Hadco BL16 Die Cast Brass Micro BulLyte

Finish: Natural Brass or Oiled Brass
Housing: Die-cast brass. Fully rotatable shroud, gasketed die-cast brass. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. gasketing is silicone.
Finish: Natural Brass (N) is as-cast and tumble polished. HADCO's Oiled Brass (OB) is chemically dipped to achieve a dark pre-Aged patina finish and the appearance will vary between production runs. Finishes will continue to patina over time making each fixture unique.

Available Bulk Packs (25 Units)
Bulk Packs (25 Units) with Lamp and Stake

OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 1/8" (80mm)
Length: 6 1/2" (165mm)

Power Consoles, Transformers & Accessories >

Hadco Die Cast Aluminum BulLyte BL36

Finish: Black, Verde, Bronze, Speckled Stone, Sienna
Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, die cast aluminum. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.

Available Bulk Packs (25 Units)
Bulk Packs (25 Units) with Lamp and Stake

Lamping: 50W maximum PAR36 screw terminal lamp. Lower wattage lamps are acceptable. 20W PAR36 lamp included, only available when ordering BL36S7-AL, BL36S7-GL or BL36S7-HL . Electrical Assembly: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Max. Weight: 1.62 lb
Length: 6 3/8" (162mm)
Width: 5 1/8" (130mm)

Power Consoles, Transformers & Accessories >

Hadco BL5016 MR16 or LED EnduraLED Micro BulLyte

The housing is constructed of double gasketed, die cast marine-Grade alloy aluminum for long life. With vibration-proof serrated teeth along with the base of the housing, it provides a positive lock. A 360 degree fully adjustable swivel arm allows for precise lighting along with an angled lens for self-cleaning. The fixture is UL, cUL listed for a 50 watt MR16 lamp or LED. The socket features a retention clip to secure the lamp in place.

Hadco BL5016 LED EnduraLED Micro BulLyte
Cool 4000K or Warm 2700K LED 7W MR16
Lamping: 35w consumption features active cooling technology to disperse heat.  White high brightness (HB) LEDs. Delivers 70% lumen maintenance at 20,000 hours. Cool white (4,000K nominal). Warm white (2,700K nominal). Instant-on light. Emits virtually no UV/IR light beam. 20,000+ hours rated life. No UV and Cool Beam (no IR). 
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning. 24° beam angle for a clearly defined beam spread. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Hadco BL5016 MR16 Micro BulLyte
Lamping: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule.
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Available BulLyte MR16 Bulk Pack (25 Units)
BulLyte MR16 Bulk Pack (25 Units) with Stake
BulLyte MR16 Bulk Pack (25 Units) with Lamp, Stake

Finish: Black, Verde, Bronze, Speckled Stone, Sienna
Housing: Die-cast marine grade aluminum alloy. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, double gasketed, die-cast marine grade alloy aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. gasketing is silicone. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.

WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2 13/16" (71mm)
Length: 5 13/16" (147 mm)
Max. Weight: 1.48 lb

More LED Landscape Lighting >
More Hadco Night Life Directional Landscape Lighting Bullets >

• Clear tempered glass affixed at 10° angle for natural cleaning
  
• High temperature adhesive
  
• Die cast marine grade alloy aluminum
  
• Stainless Steel shroud-locking machine screw
  
• Serrated teeth for positive lock
  
• Die cast locking nut
  
• Stainless Steel Phillips locking screw Black WC coated
  
• Specular aluminum heat shield
  
• Fixed socket with high temperature Teflon leads mounted to heat sink
  
• Double molded silicone gaskets
• 1/2" N.P.S. fitter
  
• Shroud is fully rotaTable at 360°
  
• Die cast marine grade aluminum
  
• Internal mounting of shroud to insure waterproof operation in any position of fixture

Hadco BL616 Die-Cast Aluminum Micro BulLyte

The BL616 is made with die-cast aluminum and has a fully adjustable swivel arm with vibration-proof locking teeth.

Finish: Black, Verde, Bronze, Speckled Stone, Sienna
Housing: Die-cast marine grade aluminum alloy. Fully rotatable shroud, gasketed, die-cast marine grade aluminum alloy. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.

Available BulLyte MR16 Bulk Pack (25 Units)
BulLyte MR16 Bulk Pack (25 Units) with Stake
BulLyte MR16 Bulk Pack (25 Units) with Lamp, Stake

OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 50W maximum MR16 bi-pin lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3" (77mm)
Length: 5 1/2" (141mm)

Power Consoles, Transformers & Accessories >

Hadco BL711 Die-cast Aluminum Low Voltage Mini-BulLyte

Housing: Die-cast aluminum. Double gasketed shroud, die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 20W maximum T3 bi-pin lamp. 35W maximum MR11 bi-pin lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2" (51mm)
Depth: 4 3/8" (111mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BL756 Die cast Aluminum Mini-BulLyte Low Voltage Accent Light

Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. Double gasketed shroud, die-cast aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: Lamp is included with fixture. 27W maximum S-8 (1156) lamp. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2" (51mm)
Depth: 4 3/8" (111mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BulLyte w/Spot Reflector BN4 Line Voltage Accent Light

Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. Fully rotatable shroud, gasketed, cast aluminum. Shroud is optional. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear tempered flat glass lens. Provided with optional shrouds only. Specular aluminum spun reflector.
Lamping: 175W maximum HID lamp. 300W maximum Incandescent lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
WARRANTY: Lifetime limited warranty.
Height: 2 5/16" (59mm)
Width: 6 1/4" (159mm)
Length: 16 1/2" (419mm)

Hadco Composite BulLyte BPL36 Low Voltage Accent Bullet

Housing: One-piece injection molded polyester resin. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fully rotatable shroud, injection molded polyester resin. Fasteners are 300 series stainless steel.
Finish: Composite is textured, pressure formed, molded-in-color.
Lamping: 50W maximum PAR36 screw terminal lamp. Lower wattage lamps are acceptable. Electrical Assembly: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Max. Weight: 1.2 lb
Length: 6 3/8" (162mm)
Width: 5 1/8" (130mm)

Hadco BulLyte BT1 Line Voltage Accent Light

Housing: gasketing is silicone. Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, gasketed, cast aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 75W maximum MR16 bi-pin lamp. Lamp is not included. Covered MR16 lamps are recommended to protect lamp's inner capsule. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white, and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Max Width: 3 7/8" (98mm)
Max Length: 8 3/8" (213mm)
Max. Weight: 1.58 lb.

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco 120 Volt BT5016 Aluminum Bullet

Housing: 360 Die-cast marine grade aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, double gasketed, die-cast marine grade alloy aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 50W maximum MR16 bi-pin lamp. Lamp is not included. Covered MR16 lamps are recommended to protect lamp's inner capsule. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white, and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2 13/16" (71mm)
Length: 5 3/8" (137mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BulLyte BT711 Line Voltage Accent Bullet

Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. Double gasketed shroud, die-cast aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 35W maximum MR11 bi-pin lamp. 20W maximum T3 bi-pin lamp. Lamp is not included. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white, and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2" (51mm)
Depth: 4 3/8" (111mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BU1 Ultem Composite BulLyte

Housing: Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. One-piece injection molded ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Composite is textured, pressure formed, molded-in-color.
OPTICAL ASSEMblY: Provided with optional shrouds only.
Lamping: 50 Watt Maximum HID. 50W maximum PAR20/R20 medium base lamp. Lamp is not included. Lower wattage lamps are acceptable. (Note: If HID or R lamp is used, accessory shroud must also be used.). Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 7/8" (98mm)
Length: 8 1/2" (216mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BU3 Composite Ultem BulLyte

Housing: Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. One-piece injection molded ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Composite is textured, pressure formed, molded-in-color.
OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 75W maximum PAR 36/AR11 screw terminal lamp. 75W maximum PAR30/R30 medium base lamp Lamp is not included. Lower wattage lamps are acceptable. HID PAR30 MH or MV acceptable with remote ballast (not included). Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 5 5/16" (135mm)
Length: 9 1/2" (241mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco Incandescent ULTEM Composite BulLyte BU4 Line Voltage Accent Bullet

Housing: Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. Shroud is optional. One-piece injection molded ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Composite is textured, pressure formed, molded-in-color.
OPTICAL ASSEMblY: One-piece injection molded ULTEM High Performance Polymer with silicone O-ring gasket. Lens is siliconed into shroud. BU4, Shroud Optional. BUN4, BUW4, Shroud included.
Lamping: 100W maximum PAR30/R30 or PAR38/R40 medium base lamp. 100W maximum MH medium base: E17 100W maximum MH medium base: PAR38 Lamp is not included. Lower wattage lamps are acceptable. HID PAR30 MH or MV acceptable with remote ballast (not included). Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 6 1/4" (159mm)
Length: 16 1/2" (419mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BUL1 Composite BulLyte

Finish: Black, Verde or Bronze
Housing: One-piece injection molded ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Composite is textured, pressure formed, molded-in-color.

Available Bulk Packs (25 Units)

OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 50W maximum MR16 bi-pin lamp. Covered MR16 are recommended to protect lamps inner capsule. Lower wattage lamps are acceptable. Lamp is not included. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. The wires are permanently fused to the clip. Stainless Steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Electrical internal connectors are stainless steel 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 3 7/8" (98mm)
Length: 8 1/2" (216mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BUL16 Composite BulLyte

Finish: Black, Verde or Bronze
Housing: One-piece injection molded ULTEM^® High Performance Polymer composite. Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. gasketing is silicone.
Finish: Composite is textured, pressure formed, molded-in-color.

Available Bulk Packs (25 Units)
Bulk Packs (25 Units) with Stake
Bulk Packs (25 Units) with Lamp and Stake

OPTICAL ASSEMblY: Clear tempered glass affixed at 10° angle for natural cleaning.
Lamping: 35W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. The wires are permanently fused to the clip. Stainless Steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Electrical internal connectors are stainless steel 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2 1/8" (80mm)
Length: 6 1/2" (165mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BUN4, BUW4 HID Composite Line Voltage BulLyte

Housing: Fully rotatable shroud, gasketed, ULTEM^® High Performance Polymer composite. One-piece injection molded ULTEM^® High Performance Polymer composite. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Composite is textured, pressure formed, molded-in-color.
OPTICAL ASSEMblY: One-piece injection molded ULTEM High Performance Polymer with silicone O-ring gasket. Lens is siliconed into shroud. BU4, Shroud Optional. BUN4, BUW4, Shroud included.
Lamping: 100W maximum PAR30/R30 or PAR38/R40 medium base lamp. 100W maximum MH medium base: E17 100W maximum MH medium base: PAR38 Lamp is not included. Lower wattage lamps are acceptable. HID PAR30 MH or MV acceptable with remote ballast (not included). Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 6 1/4" (159mm)
Length: 16 1/2" (419mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BW4 Line Voltage Die-cast Aluminum BulLyte w/Flood Reflector

Housing: Die-cast aluminum. Fully-Adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 series stainless steel. Fully rotatable shroud, gasketed, cast aluminum. Shroud is optional. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear tempered flat glass lens. Provided with optional shrouds only. Specular aluminum spun reflector.
Lamping: 175W maximum HID lamp. 300W maximum Incandescent lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
BALLAST: Must order inground (IBH) or above ground (ABH) ballast housing separately.
CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
WARRANTY: Lifetime limited warranty.
Height: 2 5/16" (59mm)
Width: 6 1/4" (159mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco EL1 Low Voltage Brass Micro BulLyte

Housing: Die-cast brass. Fully-Adjustable brass yoke-mounted arm and brass screws. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. gasketing is silicone. Fasteners are 400 series brass.
Finish: Natural Brass (N) is as-cast and tumble polished.
OPTICAL ASSEMblY: 30° aluminum reflector. Clear tempered glass lens.
Lamping: 10W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-Up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Width: 2 15/16" (75mm)
Depth: 2 5/8" (67mm)

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco EL2 Low Voltage Brass Micro BulLyte

Power Consoles, Transformers, Stakes, Posts & Accessories >

Finishes and Materials

Hadco makes it easier than ever to select the right color for your exquisite landscape
design with a full palette of colors and textures. Expand your design capabilities with new finishes that are sure to compliment your commercial or residential landscape lighting needs.

For an aged appearance, Oiled and Verde Brass materials have been added to the NightLife fixture choIces for a step back in time.

And for more earthy settings, there is the Speckled Stone finish, which is at home among foliage as well as any number of masonry materials.