Hadco Contemporary Path Lights - Low Voltage and LED

Hadco CPL21 Die-cast Aluminum Low Voltage PathLytewith Rounded Roof

Housing: Die-cast aluminum with twist-lock top for tool-less relamping. Stem is extruded aluminum. Single-piece molded silicone gasket to prevent water, dust and insect filtration. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: Clear tempered glass lens. Reflector is made of stamped, multi-faceted aluminum.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 21" (533mm)
Width: 4 3/4" (121mm)

Power Consoles, Transformers & Accessories >

Hadco CL2D LED Contemporary PathLyte with Rounded Roof

Housing: Cool external temperatures - all below 36°C - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (74°C for coated metal, 80°C for glass) and 4 seconds (61°C for coated metal, 70°C for glass) of contact. Die-cast aluminum. gasketed twist lock top. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: Clear tempered flat glass lens.
Lamping: Philips Lumiled Rebel, Cool White (6,000K)
Electrical Assembly: OptoElectronix electronic LED driver. UL Class 2 -10°C to 50°C mimum starting temperature. Internal surge protector built into LED driver circuit Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. Connects directly to 12V AC or 12V DC power source. Low voltage transformer must be ordered to power the fixtures. 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 21" (533mm)
Width: 4 3/4" (121mm)

More Hadco LED Path Lights >

Hadco SPL18 18" Small Pinnacle Die-cast Aluminum Low Voltage PathLyte

SPL18-A Black
SPL18-G Verde
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Hadco SPL1 32" Small Pinnacle Die-cast Aluminum Low Voltage PathLyte

SPL1-A Black
SPL1-G Verde
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Available Bulk Pack Black or Verde
Small Pinnacle Bulk with Lamp (25 Units) Verde
Small Pinnacle with Lamp, Stake (25 Units) Verde
Small Pinnacle Bulk with Lamp (25 Units) Black
Small Pinnacle with Lamp, Stake (25 Units) Black

Housing: Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 31" (787mm)
Width: 6 5/8" (168mm)

Hadco HBC1 Cast Aluminum Line Voltage Contemporary PathLyte

Stem and ground stake NOT included on line fixtures (120 Volts).
Lamping: 60W maximum A19 lamp. Lamp is not included. Higher wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with 18 AWG Black, white and ground wires.

Hadco HBCL1 Cast Aluminum 12 Volt PathLyte

1/2" schedule 40 Aluminum stem 20" long, threads to screw on to accessory mounting stake or junction box (sold separately).
Lamping: 18W maximum wedge base T-5 Xenon. Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

HBC1 Stem Mount PathLyte
Stem and ground stake NOT included on line fixtures (120 Volts)

HBCL1 Stem Mount PathLyte
Aluminum stem accessory mounting stake (included)