Hadco Deck Lights

Hadco Copper DeckLytes GADL1, GADL2, CUL20

Housing: Hand-formed solid copper. Copper back plate.
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

Hadco GADL1 Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

GADL2 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco CUL20 12 Volt Copper Deck Light

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco DL4 Die-cast Brass 12 Volt Deck Post Light

Housing: Die-cast brass. Fixture attaches to surface through internally mounted stainless screws. Fasteners are 300 Series stainless steel. Fixture twistlocks onto post fitter. Post Fitter - Natural die-cast brass. Fits over a standard wooden 4" x 4" post.
Finish: Natural Brass will age over time, can be field painted.
Optical Assembly: Field adjustable four-sided house-side shield allows light distribution from 1, 2, 3 or all 4 sides. Polycarbonate refractive lens. Reflector is a stamped specular aluminum.
Lamping: 20W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) stainless #8 wood screws (included).
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 3 1/8" (78mm)
Width: 4 7/8" (124mm)
Base Dimensions: 3 5/8" (92mm)

Hadco Copper DeckLytes GADL7, GADL8, GADL9

Housing: Hand-formed solid copper.
Finish: Natural copper with hand-applied oxide coating for pre-aged appearance. Will age naturally to a fine patina.
Finish: AC Hand-Crafted Copper
Lamping: Higher wattages may be used only with glass panels installed. 10W maximum wedge base T-5 Xenon.
Optical Assembly: Opalescent Honey Glass panel is sealed with silicone inside Copper fixture. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Wedge base socket type (T3-¼ or T5).
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.

Hadco GADL7 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco GADL8 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco GADL9 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco Copper DeckLytes GACL1, GACL2

Housing: Hand-formed solid copper.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Finish: AC Hand-Crafted Copper
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Lower wattage lamps are acceptable. Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

GACL1 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

GACL2 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco DL5 Die-cast Brass 12 Volt Deck Post Light

Housing: Die-cast brass. Fixture attaches to surface through internally mounted stainless screws. Fasteners are 300 Series stainless steel. Fixture twistlocks onto post fitter. Post Fitter - Natural die-cast brass. Fits over a standard wooden 4" x 4" post.
Finish: Natural Brass will age over time, can be field painted.
Optical Assembly: Field adjustable four-sided house-side shield allows light distribution from 1, 2, 3 or all 4 sides. Polycarbonate refractive lens. Reflector is a stamped specular aluminum.
Lamping: 20W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) stainless #8 wood screws (included).
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 11/16" (119mm)
Width: 4 7/8" (124mm)
Base Dimensions: 3 5/8" (92mm)

Hadco DeckLytes SRL3, SRL4

Housing: Die-cast aluminum. Fasteners are 300 Series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Lamping: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

Hadco DeckLytes SRL3
Finish: A Black, H Bronze
Optical Assembly: Frosted tempered glass lens. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco DeckLytes SRL4
Finish: A Black, B White, G Verde, H Bronze
Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco RL13 Composite Low Voltage DeckLyte

Housing: Injection-molded RYTON^® composite and polycarbonate. Fasteners are 300 Series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Composite is textured, pressure formed, molded-in-color.
Optical Assembly: Molded prismatic acrylic polycarbonate to allow adjustable light distribution.
Lamping: 10W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco Aluminum DeckLytes DSL1, DSL2

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White
Lamping: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
Optical Assembly: Frosted tempered glass lens. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

Hadco DeckLyte DSL1
Housing: Machined aluminum top cap and cast aluminum body. Fasteners are 300 Series stainless steel.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco DownLyte DSL2
Housing: Machined aluminum top cap and cast aluminum body with adjustable yoke. Fasteners are 300 Series stainless steel.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco LineLyte 12 Volt Copper Step Light

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6" to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

Above: LLL AC Antique Copper StepLytes
Below: LLL SS Stainless Steel StepLytes

Mount using Stainless wood screws (supplied) via key slots or use Mounting Plate MPLLL.

LineLyte Copper StepLyte & Deck Lights

AC Antique Copper StepLyte
Housing: Seamless solid copper extrusions with solid copper ends. Tool-less lamp access.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

SS Stainless Steel StepLyte
Housing: Stainless Steel. Bottom is open. Tool-less lamp access. Easy access to lamp.
Finish: Linear machine brushed, satin appearance.

Optical Assembly: Reflector is Stainless Steel.
Lamping: 10W wedge base T3 1/4 (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lower wattage lamps are acceptable. Lamp does not need to be protected and can be directly handled. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). Socket is hinged for easy relamping. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots. Or use Mounting Plate MPLLL.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 1" (25mm)
Width: 1" (25mm)

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

LineLyte Mounting Plate (MPLLL)

Finish: Stainless Steel has satin matte finish. Natural Copper is bright polished, untreated copper that will age naturally to a fine dark copper patina.
Mounting: Brackets attach to LineLyter with two hex nuts (included).

Bracket is inserted between two blocks or bricks, held in place by the top block.