Hadco DownLytes (Down Lights)

Hadco Aluminum DeckLytes DSL1, DSL2

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White
Lamping: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
Optical Assembly: Frosted tempered glass lens. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

Hadco DeckLyte DSL1
Housing: Machined aluminum top cap and cast aluminum body. Fasteners are 300 Series stainless steel.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco DownLyte DSL2
Housing: Machined aluminum top cap and cast aluminum body with adjustable yoke. Fasteners are 300 Series stainless steel.

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>