Hadco Landscape Lighting - Flood Lights

Hadco WA1 Aluminum Flood Light

Finish: Black, White, Verde, Bronze
Custom Colors Available
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. For larger projects where a custom color is required, contact the factory for more information.

Housing: Die-cast aluminum. Integral cast hinge with stainless steel pins is concealed internally and allows easy access for relamping. Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw. 1/2-14" NPS stainless steel threaded nipple provides secure mounting. One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws. One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal.
Optical Assembly: Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws. 1/8" tempered silicone glass. One-piece molded silicone gasket and spring clips. Aiming up to a 60° back tilt. Fixtures used outdoors must be protected from rain and sprinklers if aimed downward. Electrical Assembly: Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps. Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized.
BALLAST: Integral core and coil, NPF, Class B, starting temperature 25° F.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 9" (229mm)
Depth: 7 1/8" (181mm)
Width: Short: 17 3/4"
Width: Medium: 30 3/4" (781mm)
Width: Long: 55 1/2" (1410mm)

Hadco WAF1 Line Voltage 120V Fluorescent Die-Cast Aluminum Flood Light FloodLyte

Finish: (A) Black, (B) White, (G) Verde, (H) Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

WAF1 FloodLyte 120V 18w (2) PL9
Lamping: 18W maximum using two (2) 9W CFL (G23) compact Fluorescent lamps. Lamps not included with fixture. Electrical Assembly: 18W Fluorescent is a GX23 base socket mounted directly to reflector assembly. Fixture is pre-wired with 18 AWG Black, white and ground wires.

WAF13 FloodLyte 120v 13w PL13
Lamping: 13W CFL (GX23D-2). Electrical Assembly: 13W Fluorescent Socket is a GX23/GX23-2. Fixture is pre-wired with 18 AWG Black, white and ground wires.

Housing: Die-cast aluminum. Fully-adjustable swivel arm with vibration-proof locking teeth. gasketing is silicone. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: White powdercoated indirect, internal reflector. 1/8" tempered silicone glass. One-piece molded silicone gasket and spring clips.
BALLAST: Integral core and coil, NPF, Class B, starting temperature 25° F.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 8 11/16" (221mm)
Width: 9 11/16" (246mm)
Length: 5 13/16" (148mm)

In compliance with the 2005 Energy Policy Act (EPAct2005), we no longer offer Mercury Vapor Products.

Hadco WA2 Line Voltage 120V or 277V HID Aluminum Flood Light FloodLyte

Finish: (A) Black, (B) White, (G) Verde, (H) Bronze
Custom Colors Available
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. For larger projects where a custom color is required, contact the factory for more information.

Housing: Stainless steel screws in roof for easy top access for relamping. One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws. One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal. Die-cast aluminum.
Optical Assembly: Aiming up to a 60° back tilt. Fixtures used outdoors must be protected from rain and sprinklers if aimed downward. Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws. One-piece molded silicone gasket and spring clips. 1/8" tempered silicone glass. Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized.
BALLAST: All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 9" (229mm)
Width: 7 1/8" (181mm)
Length: 17 3/4" (451mm)

In compliance with the 2005 Energy Policy Act (EPAct2005), we no longer offer Mercury Vapor Products.

Hadco WA2 120V or 277V Line Voltage Fluorescent Aluminum Flood Light FloodLyte

Finish: (A) Black, (B) White, (G) Verde, (H) Bronze
Custom Colors Available
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. For larger projects where a custom color is required, contact the factory for more information.

Housing: Die-cast aluminum. Integral cast hinge with stainless steel pins is concealed internally and allows easy access for relamping. Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw. 1/2-14" NPS stainless steel threaded nipple provides secure mounting. One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws. One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal.
Optical Assembly: Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws. 1/8" tempered silicone glass. One-piece molded silicone gasket and spring clips. Aiming up to a 60° back tilt. Fixtures used outdoors must be protected from rain and sprinklers if aimed downward. Electrical Assembly: Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps. Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized.
BALLAST: Integral core and coil, NPF, Class B, starting temperature 25° F.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 9" (229mm)
Depth: 7 1/8" (181mm)
Width: Short: 17 3/4"
Width: Medium: 30 3/4" (781mm)
Width: Long: 55 1/2" (1410mm)

In compliance with the 2005 Energy Policy Act (EPAct2005), we no longer offer Mercury Vapor Products.

Hadco WAM1, WAM1F 120 Volt Aluminum Flood Light
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.

WAM1 Mini Architectural Flood with Shroud 120V 75W T3
Optical Assembly: Clear tempered glass lens.
Lamping: 75W maximum T3 mini candelabra lamp. Lamp is not included. Lower wattage lamps are acceptable.

WAM1F Mini Architectural Flood with Shroud 120V 75W T4
Optical Assembly: Frosted tempered glass lens.
Lamping: 75W maximum T3 mini candelabra lamp. Lamp is not included. Lower wattage lamps are acceptable.

Housing: Die-cast aluminum. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. gasketing is silicone. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Electrical Assembly: Mini-candelabra socket (E11). Fixture is pre-wired with 18 AWG Black, white and ground wires.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (126mm)

Hadco WAML14, WAML14F Low Voltage Flood Light
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

WAML14FHS720T3 Mini Architectural 12v 20w t3
Optical Assembly: Frosted tempered glass lens.
Lamping: 20W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14FAS735T3 Mini Architectural 12v 35w t3
Optical Assembly: Frosted tempered glass lens.
Lamping: 35W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14 Mini Architectural Flood with Shroud 12V 50W T4
Optical Assembly: Clear tempered glass lens.
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAML14F Mini Architectural Flood with Shroud and Frosted Lens 12V 50W T4
Optical Assembly: Frosted tempered glass lens.
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

Housing: Die-cast aluminum. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

Hadco WAM1D, WBM1D Line Voltage LED Flood Light
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze
Finish: Exterior Coating: Either Urethane or Triglycidyl Isocyanurate (TGIC) Polyester Powder to a minimum dry film thickness of 2.0 mils (0.002") for urethane powder, or 3.0 mils (0.003") for TGIC powder. The coating is electrostatically applied and cured in a gas fired convection oven by heating to a minimum of 350°F and a maximum of 400°F. Following a 5-stage conversion cleaning process, the components are finished with a super-durable, electrostatically applied, thermoset polyester powdercoat which is bonded by heat fusion thermosetting. The finish is laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: 380 die-cast aluminum alloy. Fasteners are 300 Series stainless steel to prevent corrosion and ensure longer life. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: Clear or frosted tempered glass lens.
Lamping: 5,000K color temperature (CCT) or 3,000K amber coated tempered glass lens. Approximately 50,000 hours of operational life (at 25 C ambient temperature and 70% lumen maintenance). >80 CRI. Lamp is included with fixture. Electrical Assembly: Fixture is pre-wired with 18AWG Black, white and ground wires. Smart Select Electronic Driver 120 to 277 VAC input; 50-60Hz; auto-sensing.12 total watts consumed.
WARRANTY: 5 year extended warranty
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

Hadco WAML1D, WBML1D Low Voltage LED Flood Light
Mini Architectural Flood Light with Shroud

Finish: Black, White, Verde, Bronze
Finish: Exterior Coating: Either Urethane or Triglycidyl Isocyanurate (TGIC) Polyester Powder to a minimum dry film thickness of 2.0 mils (0.002") for urethane powder, or 3.0 mils (0.003") for TGIC powder. The coating is electrostatically applied and cured in a gas fired convection oven by heating to a minimum of 350°F and a maximum of 400°F. Following a 5-stage conversion cleaning process, the components are finished with a super-durable, electrostatically applied, thermoset polyester powdercoat which is bonded by heat fusion thermosetting. The finish is laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: 380 die-cast aluminum alloy. Fasteners are 300 Series stainless steel to prevent corrosion and ensure longer life. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: Clear or frosted tempered glass lens.
Lamping: Cool White (6,000K) Warm White (3,000K) Lamp is included with fixture. Electrical Assembly: 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 6.4 total watts (high wattage) or 3.7 total watts (low wattage).
WARRANTY: 5 year extended warranty
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 5" (127mm)

Hadco WAMT14, WAMT14F Line Voltage Flood Light with Integral Transformer
Mini Architectural Flood Light with Integral Transformer and Shroud

Finish: Black, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

WAMT14 Mini Architectural Flood 120V 50W T4
Optical Assembly: Clear tempered glass lens.
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

WAMT14F Mini Architectural Flood with Frosted Lens 120V 50W T4
Optical Assembly: Frosted tempered glass lens.
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable.

Housing:   Die-cast aluminum.  gasketing is silicone.  Fully-adjustable swivel arm with vibration-proof locking teeth.  Fasteners are 300 Series stainless steel.  1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 7 7/16" (189mm)
Width: 6 7/8" (175mm)
Length: 5 1/16" (128mm)

Hadco WBM1, WBM1F Line Voltage Die-cast Aluminum Mini Architectural Flood Light
NO Shroud

Finish: Black, White, Verde, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: Die-cast aluminum. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: Clear tempered glass lens. Frosted tempered glass lens.
Lamping: 75W maximum T3 mini candelabra lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Mini-candelabra socket (E11). Fixture is pre-wired with 18 AWG Black, white and ground wires.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 3 7/16" (88mm)

Hadco WBML14 Low Voltage Die-cast Aluminum Mini Architectural Flood Light
NO Shroud

Finish: Black, White, Verde, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: Die-cast aluminum. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: Frosted tempered glass lens. Clear tempered glass lens.
Lamping: 35W maximum T3 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/8" (123mm)
Width: 6 7/8" (175mm)
Length: 3 7/8" (96mm)

Hadco WBMT14, WBMT14F Line Voltage Die-cast Aluminum Micro FloodLyte with Integral Transformer
NO Shroud

Finish: Black, Bronze
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Housing: Die-cast aluminum. gasketing is silicone. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 Series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Optical Assembly: Clear tempered glass lens. Frosted tempered glass lens.
Lamping: 50W maximum T4 halogen. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. Fixture is pre-wired with 18 AWG Black, white and ground wires. Step-down transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection. Can be used with energy-efficient halogen lamp.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 7 7/16" (189mm)
Width: 6 7/8" (175mm)
Length: 3 7/16" (128mm)

Above: Hadco WA3 Line Voltage and High Voltage FloodLyte Landscape Lighting with Shroud
Below: Hadco WB3 Line Voltage and High Voltage FloodLyte Landscape Lighting without Shroud

Hadco WA3, WB3 Line Voltage and High Voltage FloodLyte Landscape Lighting

Finish: (A) Black, (B) White, (G) Verde, (H) Bronze
Custom Colors Available
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. For larger projects where a custom color is required, contact the factory for more information.

Optics: (HF) Horiz. Flood, (VF ) Vert. Flood, (HS) Horiz. Spot
Optical Assembly: 1/8" tempered silicone glass. One-piece molded silicone gasket and spring clips. Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws.

Voltage: (E) 120V, (F) 208V, (G) 240V, (H) 277V, (K) 347V
Electrical Assembly: Mini-candelabra socket (E11). 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps. Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized.
BALLAST: All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable.

Housing: Die-cast aluminum. Integral cast hinge with stainless steel pins is concealed internally and allows easy access for relamping. Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw. 1/2-14" NPS stainless steel threaded nipple provides secure mounting. One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws. One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

WA3 with Shroud
Height: 11 3/16" (284mm)
Width: 9" (229mm)
Length: 16 13/16" (427mm)

WB3 without Shroud
Height: 11 3/16" (284mm)
Width: 5 11/16" (145mm)
Length: 16 13/16" (427mm)

In compliance with the 2005 Energy Policy Act (EPAct2005), we no longer offer Mercury Vapor Products. Please note all 150-500w mh fixtures are In compliance with title 20 / EISA.
Ballast remoted in IngRound composite BX.

Hadco WA3 Line Voltage and High Voltage FloodLyte Landscape Lighting with Shroud

Hadco WB3 Line Voltage and High Voltage FloodLyte Landscape Lighting without Shroud