Hadco Horizon & Pagoda Path Lights - Low Voltage, Line Voltage and LED

Hadco P39 2 Tier Pagoda Aluminum Contemporary Path Light

Lamping: 75W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.

Hadco PL39 Die-cast Aluminum Low Voltage PathLyte

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Housing: Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
OPTICAL ASSEMblY: Clear tempered glass lens.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 7" (178mm)
Width: 6" (152mm)

Hadco Q39 Aluminum 120 Volt Path Light

Housing: Die-cast aluminum. Removable roof for easy relamping. Stem is extruded aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear molded glass lens.
Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 8 13/16" (224mm)
Width: 6" (152mm)

Hadco QF59 Die-cast Aluminum Line Voltage PathLyte

Housing: Die-cast aluminum. Removable roof for easy relamping. Stem is extruded aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear molded glass lens.
Lamping: 13W CFL (GX23D-2). Lamp is not included. Electrical Assembly: 13W Fluorescent Socket is a GX23/GX23-2. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
BALLAST: Fluorescent ballast is core and coil, NPF Class B. Fluorescent ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 11 5/16" (287mm)
Width: 6" (152mm)

Hadco RB30 Horizon Aluminum Line Voltage Bollard

Housing: Die-cast aluminum. Constructed of 5" diameter extruded aluminum (1/8" wall). Head assembly is mounted to lower housing with three (3) stainless steel screws. Fasteners are 300 series stainless steel. gasketing is silicone.
Finish: Optional CraftStone™ finish is highly weather-resistant and bonded to the aluminum substrate. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear molded glass lens. Highly reflective white paint on spun aluminum rings, mounted on the underside of louvers. Electrical Assembly: 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Standard quad-volt core and coil mounted on removable ballast bracket, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts.
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy Installation: . Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).
Installation: & Mounting: VOLTAGE CAUTION: Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8'. Check with local authorities before specifying alternate voltages. Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 32 1/4" (818mm)
Width: 10 1/8" (257mm)

More Hadco Bollard Path Lights >

Hadco R3 Die-cast Aluminum Line Voltage PathLyte

Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.

Hadco RL3 Large Horizon Die-cast Aluminum Low Voltage PathLyte

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Housing: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Painted, tempered glass jar with clear glass top. Spun aluminum reflector with white thermoset powdercoat.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 18" (457mm)
Width: 9 1/8" (232mm)

Hadco R39 Horizon Pagoda Path Light

Housing: Die-cast aluminum. Removable roof for easy relamping. Stem is extruded aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear molded glass lens.
Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 10 1/8"
Width: 8 5/8"

Hadco RL4 Large Horizon Low Voltage Die-cast Aluminum PathLyte

The charm and unique character of Horizon Path Lights are reflected in their individual styling. They create a soft luminescent ambience, free of glare, because of their hidden light source.

Housing: Die-cast aluminum. Stem is extruded aluminum. Fasteners are 300 series stainless steel. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Frosted tempered glass lens. Spun aluminum reflector with white thermoset powdercoat.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 17 1/4" (435mm)
Width: 10" (253mm)

Hadco RL4D3 Large Horizon LED PathLyte

Housing: Cool external temperatures - all below 40ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (74ºC for coated metal, 80ºC for glass) and 4 seconds (61ºC for coated metal, 70ºC for glass) of contact. Die-cast aluminum. Stem is extruded aluminum. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. gasketing is silicone.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Frosted tempered glass lens. Spun aluminum reflector with white thermoset powdercoat.
Lamping: Philips Lumiled Rebel, Cool White (6,000K)
Electrical Assembly: Low voltage transformer must be ordered to power the fixtures. Input voltage range (VAC): 10.8 - 17.0. 6.5 total watts consumed. OptoElectronix electronic LED driver. UL Class 2 -10°C to 50°C mimum starting temperature. Internal surge protector built into LED driver circuit Connects directly to 12V AC or 12V DC power source. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
IP RATING: IP66: Dust-tight and sealed against direct jets of water.
Height: 17 1/4" (435mm)
Width: 10" (253mm)

More Hadco LED Path Lights >

Hadco R30 Small Horizon Contemporary Bollard Path Light

Housing: Die-cast aluminum. Extruded aluminum direct burial pole, 55" overall length. Fasteners are 300 series stainless steel. gasketing is diecut neoprene.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear molded glass lens.
Lamping: 100W maximum A19 lamp. Lamp is not included. Lower wattage lamps are acceptable. Electrical Assembly: Medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 AWG Black, white, and ground wires.
Installation: & Mounting: Direct burial in ground to a depth of 18".
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001:2000 Standards. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 37" (940mm)
Width: 10 1/8" (257mm)

More Hadco Bollard Path Lights >