Hadco Copper Landscape Lighting

Hadco GABL16 Low Voltage Copper BulLyte

Housing: Hand-formed solid copper. Fully-adjustable swivel arm with vibration-proof locking teeth. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.
Optical Assembly: Clear tempered glass lens.
Lamping: Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule. 35W maximum MR16 bi-pin lamp. Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Width: 2 1/4" (57mm)
Length: 8 1/4" (219mm)

Power Consoles, Transformers & Accessories  >

Hadco GADL2 Low Voltage Copper DeckLyte

Housing: Hand-formed solid copper. Fasteners are 400 Series brass. Post Fitter - 4" x 4" formed solid copper fitter. Fits over a standard wooden 4" x 4" post. Fixture attaches to surface through internally mounted stainless screws.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.
Optical Assembly: Field adjustable four-sided house-side shield allows light distribution from 1, 2, 3 or all 4 sides. Polycarbonate refractive lens. Reflector is a stamped specular aluminum.
Lamping: 20W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) stainless #8 wood screws (included).
WARRANTY: Lifetime limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 3 3/16" (81mm)
Width: 4 9/16" (116mm)
Base Dimensions: 3 1/2" (89mm)

Above: GADL51 Post Top for 4" x 4" Wood Post
Below: GADL52 Post Top for 4" x 4" Vinyl Post

Hadco GADL51 & GADL52 Mission Style Low Voltage Copper Post Lights DeckLytes

Housing: Hand-formed solid copper. Fasteners are 400 Series brass. Post Fitter - 4" x 4" formed solid copper fitter. GADL51 fits over a standard wooden 4" x 4" post.
GADL52 fits over a standard vinyl 4" x 4" post.  
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Optical Assembly: Honey colored iridized art glass.
Lamping: 35W maximum T3 halogen. 20W halogen lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 9 5/8" (244mm)
Width: 6 1/2" (165mm)
Base Dimensions: 3 1/2" (89mm)

Hadco Mission Style Landscape Lighting >

Above: GADL61 Post Top for 6" x 6" Wood Post
Below: GADL62 Post Top for 6" x 6" Vinyl Post

Hadco GADL61 & GADL62 Mission Style Low Voltage Copper Post Lights DeckLytes

Housing: Hand-formed solid copper. Fasteners are 400 Series brass. Post Fitter 6" x 6" formed solid copper fitter.
GADL61 fits over a standard wooden 6" x 6" post.
GADL62 fits over a standard vinyl 6" x 6" post.  
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Optical Assembly: Honey colored iridized art glass.
Lamping: 35W maximum T3 halogen. 20W halogen lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 10 3/8" (264mm)
Width: 6 1/2" (165mm)
Base Dimensions: 5 11/16" (144mm)

Hadco Mission Style Landscape Lighting >

Hadco Copper DeckLytes GADL7, GADL8, GADL9

Housing: Hand-formed solid copper.
Finish: Natural copper with hand-applied oxide coating for pre-aged appearance. Will age naturally to a fine patina.
Finish: AC Hand-Crafted Copper
Lamping: Higher wattages may be used only with glass panels installed. 10W maximum wedge base T-5 Xenon.
Optical Assembly: Opalescent Honey Glass panel is sealed with silicone inside Copper fixture. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Wedge base socket type (T3-¼ or T5).
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.

Hadco GADL7 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco GADL8 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco GADL9 Mission Style Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco Copper DeckLytes GACL1, GACL2

Housing: Hand-formed solid copper.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Finish: AC Hand-Crafted Copper
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Lower wattage lamps are acceptable. Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

GACL1 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

GACL2 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco Copper DeckLytes GADL1, GADL2, CUL20

Housing: Hand-formed solid copper. Copper back plate.
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2008 Standards.

Hadco GADL1 Low Voltage Copper DeckLyte

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

GADL2 Copper

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco CUL20 12 Volt Copper Deck Light

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

Hadco GAHL1 Low Voltage Copper Hanging Light DownLyte

Housing: Housing is a hand-formed solid copper with hand-punched holes for decorative element: annealed for strength. 12" hanging kit included, hooked at both ends for easy attachment to support ring and optional hanging chain (supplied by others).
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 4 7/16" (113mm)
Width: 3 13/16" (97mm)

Hadco GAWL1 Low Voltage Copper Wall Washer Accent Light

Housing: Hand-formed solid copper. Fasteners are 400 Series brass. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Optical Assembly: Lens is a clear polycarbonate shield.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 8 1/2" (216mm)
Width: 6 15/16" (133mm)

More Hadco Wall Washers: Accent Landscape Lighting >

Box Dimensions
2 1/4" (57mm)
Depth: 2 3/4" (70mm)
Length: 3 1/2" (89mm)

Faceplate Dimensions
Height: 2 7/8" (73mm)
Length: 4 9/16" (116mm)

Hadco RLL2 Copper or Stainless Steel 12 Volt Step Light

RLL2-PC
Housing: Solid copper louvered faceplate with galvanized steel, single gang recessed back box. Fasteners are 300 Series stainless steel. gasketing is diecut neoprene.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

RLL2-SS
Housing: Stainless steel louvered faceplate with galvanized steel, single gang recessed back box. Fasteners are 300 Series stainless steel. gasketing is diecut neoprene.
Finish: Stainless Steel has satin matte finish.

Optical Assembly: Frosted tempered glass lens. Specular aluminum segmented reflector assembly.
Lamping: 12" width maximum S-8 (93) lamp. Lower wattage lamps are acceptable. Lamp is included with fixture. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001: 2000 Standards.
Height: 2 13/16" (71mm)
Width: 4 5/8" (116mm)
Depth: 2 3/4" (70mm)

Photometric Data
Horizontal footcandles from center, d

Hadco LineLyte 12 Volt Copper Step Light

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6" to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

LLL AC Antique Copper StepLytes
Below: LLL SS Stainless Steel StepLytes

Mount using Stainless wood screws (supplied) via key slots or use Mounting Plate MPLLL.

LineLyte Copper StepLyte & Deck Lights

AC Antique Copper StepLyte
Housing: Seamless solid copper extrusions with solid copper ends. Tool-less lamp access.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

SS Stainless Steel StepLyte
Housing: Stainless Steel. Bottom is open. Tool-less lamp access. Easy access to lamp.
Finish: Linear machine brushed, satin appearance.

Optical Assembly: Reflector is Stainless Steel.
Lamping: 10W wedge base T3 1/4 (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lower wattage lamps are acceptable. Lamp does not need to be protected and can be directly handled. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). Socket is hinged for easy relamping. 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots. Or use Mounting Plate MPLLL.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 1" (25mm)
Width: 1" (25mm)

Compare Mini Step Lights, Mini Wall Lights & Deck Lights...>

LineLyte Mounting Plate (MPLLL)

Finish: Stainless Steel has satin matte finish. Natural Copper is bright polished, untreated copper that will age naturally to a fine dark copper patina.
Mounting: Brackets attach to LineLyter with two hex nuts (included).

Bracket is inserted between two blocks or bricks, held in place by the top block.