
Above: Hadco SML4 Deco Style Art Deco Path
Light with Alabaster acrylic shade
Below:
Hadco SML5 Deco Style Art Deco Path Light
with Tea Stain acrylic shade


Above: Hadco SML4 Deco Style Art Deco Path Light with Alabaster
acrylic shade
Below: Hadco SML5 Deco Style Art Deco Path Light with Tea Stain acrylic shade

|
Hadco
SML4, SML5 Deco Style 12 Volt Path Light
SML4-A
Cast Aluminum PathLyte
SML4-H
Cast Aluminum PathLyte Finish: Black or bronze thermoset powdercoat.
SHADE: Alabaster acrylic shade.
SML5-A
Cast Aluminum PathLyte
SML5-H
Cast Aluminum PathLyte
Finish: Black or bronze thermoset powdercoat.
SHADE: Tea Stain acrylic shade.
Housing: All cast aluminum construction. Cast aluminum decorative
arm. 1/2" schedule 40 Aluminum stem 20" long, threads
to screw on to accessory mounting stake (included) or junction
box (sold separately).
Lamping: Lamp is included with fixture. Xenon lamp life is
approximately 10,000 hours. Higher wattages may be used only
with glass panels installed. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer,
not included. Low voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable, not included.
12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG.
Wedge base socket type (T3-1/4 or T5).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations.
Height: 25 1/8" (638mm)
Width: 5 1/2" (140mm)

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| SML4-A |
Cast Aluminum PathLyte |
12V |
18W T5* |
Black |
NON STOCK |
| SML4-H |
Cast Aluminum PathLyte |
12V |
18W T5* |
Bronze |
NON STOCK |
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| SML5-A |
Cast Aluminum PathLyte |
12V |
18W T5* |
Black |
NON STOCK |
| SML5-H |
Cast Aluminum PathLyte |
12V |
18W T5* |
Bronze |
NON STOCK |


|
Hadco
SML3 Cast Aluminum Path Light with Brushed Spun Copper
Shade
Housing: Cast aluminum decorative arm. 1/2" schedule 40
Aluminum stem 20" long, threads to screw on to accessory
mounting stake (included) or junction box (sold separately).
Hammered copper shade brushed finish with clear coat.
Finish: Black thermoset, hand rubbed-verde antiqued over Black
thermoset powdercoat, or bronze thermoset powdercoat.
Lamping: Lamp is included with fixture. Xenon lamp life is
approximately 10,000 hours. Higher wattages may be used only
with glass panels installed. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer,
not included. Low voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable, not included.
12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG.
Wedge base socket type (T3-1/4 or T5).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations.
Height: 25 1/8" (638mm)
Width: 5 1/2" (140mm)
More
Copper Landscape Lighting >
More
Copper Path Lighting >

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| SML3-A |
Cast Aluminum PathLyte |
12V |
18W T5* |
Black |
NON STOCK |
| SML3-G |
Cast Aluminum PathLyte |
12V |
18W T5* |
Verde |
NON STOCK |
| SML3-H |
Cast Aluminum PathLyte |
12V |
18W T5* |
Bronze |
NON STOCK |
|

Above: GADL51 Post Top for 4" x 4" Wood Post
Below: GADL52 Post Top for 4" x 4" Vinyl Post


|
Hadco
GADL51 & GADL52 Mission Style Low Voltage Copper Post
Lights DeckLytes
Housing: Hand-formed solid copper. Fasteners are 400 series
brass. Post Fitter - 4" x 4" formed solid copper
fitter. GADL51 fits over a standard wooden 4" x 4" post.
GADL52 fits over a standard vinyl 4" x 4" post.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
OPTICAL ASSEMblY: Honey colored iridized art glass.
Lamping: 35W maximum T3 halogen. 20W halogen lamp is included
with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 volt fixture
is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included for
easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 9 5/8" (244mm)
Width: 6 1/2" (165mm)
Base Dimensions: 3 1/2" (89mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GADL51-AC |
Garden Art 4x4 Mission Post Top for Wood Post |
12V |
20W t3* |
Copper |
NON STOCK |
| GADL52-AC |
Garden Art 4x4 Mission Post Top for Vinyl Post |
12v |
20W t3* |
Copper |
NON STOCK |
|

Above: GADL61 Post Top for 6" x 6" Wood Post
Below: GADL62 Post Top for 6" x 6" Vinyl Post


|
Hadco
GADL61 & GADL62 Mission Style Low Voltage Copper Post
Lights DeckLytes
Housing: Hand-formed solid copper. Fasteners are 400 series
brass. Post Fitter 6" x 6" formed solid copper fitter.
GADL61 fits over a standard wooden 6" x 6" post.
GADL62 fits over a standard vinyl 6" x 6" post.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
OPTICAL ASSEMblY: Honey colored iridized art glass.
Lamping: 35W maximum T3 halogen. 20W halogen lamp is included
with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 volt fixture
is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included for
easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 10 3/8" (264mm)
Width: 6 1/2" (165mm)
Base Dimensions: 5 11/16" (144mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GADL61-AC |
Garden Art 6x6 Mission Post Top for Wood Post |
12V |
20W t3* |
Copper |
NON STOCK |
| GADL62-AC |
Garden Art 6x6 Mission Post Top for Vinyl Post |
12v |
20W t3* |
Copper |
NON STOCK |
|


|
Hadco
GASL1 Mission Style Low Voltage Copper PathLyte
Housing: Hand-formed solid copper. Solid copper stem. 1/2" NPS
male threads to screw onto accessory mounting stake or junction
box, sold separately.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
OPTICAL ASSEMblY: Opalescent glass panels.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with
fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 Volt fixture
is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included for
easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 14 5/16" (364mm)
Width: 6 1/2" (165mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GASL1-AC |
Garden Art Copper Mission Style PathLyte |
12V |
20w t3* |
Copper |
NON STOCK |
|


|
Hadco
GASL5 Mission Style Low Voltage Copper PathLyte
Housing: Hand-formed solid copper. 1/2" NPS male threads
to screw onto accessory mounting stake or junction box, sold
separately. Fasteners are 400 series brass.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
OPTICAL ASSEMblY: Honey colored iridized art glass.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with
fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 Volt fixture
is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included for
easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 21 1/8" (537mm)
Width: 6 1/2" (165mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GASL5-AC |
Garden Art Copper Mission Style Mini Bollard |
12V |
20w t3* |
Copper |
NON STOCK |
|


|
Hadco
GASL4 Copper Mission Style Hook Mount Deco Glass Path Light
Housing: Hand-formed solid copper. 1/2" NPS male threads
to screw onto accessory mounting stake or junction box, sold
separately. Fasteners are 400 series brass.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
OPTICAL ASSEMblY: Honey colored iridized art glass.
Lamping: 20W maximum T3 bi-pin lamp. Lamp is included with
fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C
high temperature teflon coated wire leads. 12 Volt fixture
is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1
wire. Low voltage quick connector, catalog #LVC3 included for
easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. Manufactured to ISO 9001:2000 Standards.
Height: 21 1/8" (537mm)
Width: 6 1/2" (165mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GASL4-AC |
Copper Mission Style Hook Mount with Art Deco Glass |
12V |
20w t3* |
Copper |
NON STOCK |
|


|
Hadco
GASL6 Copper Mission Style Hook Mount Deco Glass Path Light
Housing: Hand-formed solid copper. 1/2" dia. x 27 3/4" long
copper bent bracket arm with split brass end loop attaches
to ground stake (included).
Finish: Natural copper with hand-applied oxide coating for
pre-aged appearance. Will age naturally to a fine patina.
OPTICAL ASSEMblY: Opalescent Honey Glass panel is sealed with
silicone inside Copper fixture. Electrical Assembly: 12 Volt system requires remote transformer,
not included. Low voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable, not included.
12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG,
105° C, SPT-1 wire. Wedge base socket type (T3-1/4 or T5).
Lamping: Lamp is included with fixture. Xenon lamp life is
approximately 10,000 hours. Higher wattages may be used only
with glass panels installed. 18W maximum wedge base T-5 Xenon.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations.
Height: 27 3/4" (705mm)
Width: 4 7/8" (124mm)
Projection: 9 3/4" (248mm)
More
Copper Landscape Lighting >
Copper
Path Lighting >

|
| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GASL6-AC |
Garden Art Copper, Hook Mount Mission Style w/Deco Glass
PathLyte |
12V |
20w t3* |
Copper |
NON STOCK |
|


|
Hadco
IWPC4 Art Deco Line Voltage Path Lights with Opalescent Honey
Glass Panels
Stem and ground stake NOT included on line fixtures (120 Volts).
Lamping: 60W maximum A19 lamp. Lamp is not included. Higher
wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with
18 AWG Black, white, and ground wires.
Height: 11 7/8" (302mm)
Hadco
IWPCL4 Art Deco Low Voltage Path Lights with Opalescent Honey
Glass Panels
1/2" schedule 40 Aluminum stem 20" long, threads to
screw on to accessory mounting stake (included) or junction
box (sold separately).
Lamping: 18W maximum wedge base T-5 Xenon. Lamp is included
with fixture. Xenon lamp life is approximately 10,000 hours.
Higher wattages may be used only with glass panels installed. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). 12
Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Low
voltage quick connector, catalog #LVC3 included for easy hook-up
to the low voltage supply cable, not included. 12 Volt system
requires remote transformer, not included.
Height: 34 1/8" (867mm)
Housing: All cast aluminum construction. Removable roof for
easy relamping. Cast aluminum roof and cage bottom. Extruded
aluminum cage legs.
Finish: Black or bronze thermoset powdercoat.
OPTICAL ASSEMblY: Opalescent honey glass panels.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations.
cETL listed to Canadian safety standards for wet locations.
Width: 9 1/8" (232mm) |

Line Voltage
Stem and ground stake NOT included on line fixtures (120 Volts) |

Low Voltage
1/2" schedule 40 Aluminum stem 20" long,
threads to screw on to accessory mounting stake (included)
or junction box (sold separately) |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWPC4-A |
Aluminum PathLyte |
120V |
60W A19 |
Black |
NON STOCK |
| IWPC4-H |
Aluminum PathLyte |
120V |
60W A19 |
Bronze |
NON STOCK |
| Accessories |
|
|
|
|
|
| S12A |
12" Stem |
|
|
|
QK SHIP |
| S12H |
12" Stem |
|
|
|
QK SHIP |
| S24A |
24" Stem |
|
|
|
QK SHIP |
| S24H |
24" Stem |
|
|
|
QK SHIP |
| S36A |
36" Stem |
|
|
|
QK SHIP |
| S36H |
36" Stem |
|
|
|
QK SHIP |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWPCL4-A |
Aluminum PathLyte |
12V |
18W t5* |
Black |
NON STOCK |
| IWPCL4-H |
Aluminum PathLyte |
12V |
18W t5* |
Bronze |
NON STOCK |
|


|
Hadco
IWP3 Art Deco Line Voltage Path Lights with Opalescent Honey
Glass Panels
Stem and ground stake NOT included on line fixtures (120 Volts).
Lamping: 60W maximum A19 lamp. Lamp is not included. Higher
wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture
is pre-wired with 18 AWG Black, white, and ground wires.
Height: 11 7/8" (302mm)
Hadco
IWPL3 Art Deco Low Voltage Path Lights with Opalescent Honey
Glass Panels
1/2" schedule 40 Aluminum stem 20" long, threads to
screw on to accessory mounting stake (included) or junction
box (sold separately).
Lamping: 18W maximum wedge base T-5 Xenon. Lamp is included
with fixture. Xenon lamp life is approximately 10,000 hours.
Higher wattages may be used only with glass panels installed. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). 12
Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Low
voltage quick connector, catalog #LVC3 included for easy hook-up
to the low voltage supply cable, not included. 12 Volt system
requires remote transformer, not included.
Height: 34 1/8" (867mm)
Housing: All cast aluminum construction. Removable roof for
easy relamping. Cast aluminum roof and cage bottom. Extruded
aluminum cage legs.
Finish: Black or bronze thermoset powdercoat.
OPTICAL ASSEMblY: Opalescent honey glass panels.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations.
Width: 9 1/8" (232mm) |

Line Voltage
Stem and ground stake NOT included on line fixtures (120
Volts) |

Low Voltage
1/2" schedule 40 Aluminum stem 20" long, threads
to screw on to accessory mounting stake (included) or junction
box (sold separately) |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWP3-A |
Aluminum PathLyte |
120V |
40W A19 |
Black |
NON STOCK |
| IWP3-H |
Aluminum PathLyte |
120V |
40W A19 |
Bronze |
NON STOCK |
| Accessories |
|
|
|
|
|
| S12A |
12" Stem |
|
|
|
QK SHIP |
| S12H |
12" Stem |
|
|
|
QK SHIP |
| S24A |
24" Stem |
|
|
|
QK SHIP |
| S24H |
24" Stem |
|
|
|
QK SHIP |
| S36A |
36" Stem |
|
|
|
QK SHIP |
| S36H |
36" Stem |
|
|
|
QK SHIP |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWPL3-A |
Aluminum PathLyte |
12V |
18W t5* |
Black |
NON STOCK |
| IWPL3-H |
Aluminum PathLyte |
12V |
18W t5* |
Bronze |
NON STOCK |
|


|
Hadco
IWP4 Art Deco Line Voltage Path Lights with Opalescent Honey
Glass Panels
Stem and ground stake NOT included on line fixtures (120 Volts).
Lamping: 60W maximum A19 lamp. Lamp is not included. Higher
wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture
is pre-wired with 18 AWG Black, white, and ground wires.
Height: 11 7/8" (302mm)
Hadco
IWPL4 Art Deco Low Voltage Path Lights with Opalescent Honey
Glass Panels
1/2" schedule 40 Aluminum stem 20" long, threads to
screw on to accessory mounting stake (included) or junction
box (sold separately).
Lamping: 18W maximum wedge base T-5 Xenon. Lamp is included
with fixture. Xenon lamp life is approximately 10,000 hours.
Higher wattages may be used only with glass panels installed. Electrical Assembly: Wedge base socket type (T3-1/4 or T5). 12
Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Low
voltage quick connector, catalog #LVC3 included for easy hook-up
to the low voltage supply cable, not included. 12 Volt system
requires remote transformer, not included.
Height: 34 1/8" (867mm)
Housing: All cast aluminum construction. Removable roof for
easy relamping. Cast aluminum roof and cage bottom. Extruded
aluminum cage legs.
Finish: Black or bronze thermoset powdercoat.
OPTICAL ASSEMblY: Opalescent honey glass panels.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations.
Width: 9 1/8" (232mm) |

Line Voltage
Stem and ground stake NOT included on line fixtures (120
Volts) |

Low Voltage
1/2" schedule 40 Aluminum stem 20" long, threads
to screw on to accessory mounting stake (included) or junction
box (sold separately) |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWP4-A |
Aluminum PathLyte |
120V |
60W A19 |
Black |
NON STOCK |
| IWP4-H |
Aluminum PathLyte |
120V |
60W A19 |
Bronze |
NON STOCK |
| Accessories |
|
|
|
|
|
| S12A |
12" Stem |
|
|
|
QK SHIP |
| S12H |
12" Stem |
|
|
|
QK SHIP |
| S24A |
24" Stem |
|
|
|
QK SHIP |
| S24H |
24" Stem |
|
|
|
QK SHIP |
| S36A |
36" Stem |
|
|
|
QK SHIP |
| S36H |
36" Stem |
|
|
|
QK SHIP |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| IWPL4-A |
Aluminum PathLyte |
12V |
18W t5* |
Black |
NON STOCK |
| IWPL4-H |
Aluminum PathLyte |
12V |
18W t5* |
Bronze |
NON STOCK |
|
| |
Hadco
Copper DeckLytes GADL7, GADL8, GADL9
Housing: Hand-formed solid copper.
Finish: Natural copper with hand-applied oxide coating for
pre-aged appearance. Will age naturally to a fine patina.
Finish: AC Hand-Crafted Copper
Lamping: Higher wattages may be used only with glass panels
installed. 10W maximum wedge base T-5 Xenon.
OPTICAL ASSEMblY: Opalescent Honey Glass panel is sealed with
silicone inside Copper fixture. Electrical Assembly: 12 Volt system requires remote transformer,
not included. Low voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable, not included.
12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG,
105° C, SPT-1W wire. Wedge base socket type (T3-¼ or T5).
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet
locations. cETL listed to Canadian safety standards for wet
locations. |


|
Hadco
GADL7 Mission Style Low Voltage Copper DeckLyte
Installation: & Mounting: 3 3/4" x 2 1/4" wide Copper
mounting plate. Two (2) stainless tapping screws x 3/4" long
supplied.
Compare
Mini Step Lights, Mini Wall Lights & Deck Lights...> |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GADL7-AC |
Copper DeckLyte |
12V |
10W xenon t3* |
Copper |
NON STOCK |
|


|
Hadco
GADL8 Mission Style Low Voltage Copper DeckLyte
Installation: & Mounting: 2" x 3 1/8" wide Copper
mounting plate. Two (2) stainless tapping screws x 3/4" long
supplied.
Compare
Mini Step Lights, Mini Wall Lights & Deck Lights...> |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GADL8-AC |
Copper DeckLyte |
12V |
10W xenon t3* |
Copper |
NON STOCK |
|


|
Hadco
GADL9 Mission Style Low Voltage Copper DeckLyte
Installation: & Mounting: 3 3/4" x 2 1/4" wide Copper
mounting plate. Two (2) stainless tapping screws x 3/4" long
supplied.
Compare
Mini Step Lights, Mini Wall Lights & Deck Lights...> |
|
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| GADL9-AC |
Copper DeckLyte |
12V |
10W xenon t3* |
Copper |
NON STOCK |

|