Hadco
Rock Light RL116 RockLyte RL116-I Granite
Housing: Constructed of fiberglass reinforced
molded concrete. Single-piece molded silicone
gasket to prevent water, dust, and insect filtration.
Die-cast aluminum trim ring with silicone gasket
for watertight seal. Fasteners are 300 series
stainless steel. Easy access to lamp.
Finish: Thermoset polyester powdercoat is electrostatically
applied after a five-stage conversion cleaning
process and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability
and fade resistance in accordance with ASTM B-117-64
and ANSI/ASTM G53-77 specifications.
OPTICAL ASSEMblY: Clear tempered glass lens.
Lamping: 50W maximum MR16 bi-pin lamp. Lower
wattage lamps are acceptable. Covered MR16 lamps
are recommended to protect lamp's inner capsule.
Lamp is not included. Electrical Assembly: Bi-pin socket type (GU5.3)
with 250° C high temperature teflon coated wire
leads. 12 Volt fixture is pre-wired with 3-ft
pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low
voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply cable,
not included. 12 Volt system requires remote
transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001:2000
Standards.
Height: 6" (152mm)
Width: 8" (203mm)

| |
|
Voltage |
Lamp Wattage |
Finish |
Stock |
| RL116-I |
RockLyte |
12V |
50w MR16 |
Granite |
QK SHIP |
|