Hadco Rustic Path Lights - Low Voltage, Line Voltage and LED

Hadco MLL2 Leaf Die-cast Aluminum Low Voltage PathLyte

Housing: All cast aluminum construction. 1/2" Schedule 40 Aluminum stem 18" long threads to screw on to accessory mounting stake or junction box (sold separately).
Finish: Black thermoset, hand rubbed-verde antiqued over Black thermoset powdercoat, or bronze thermoset powdercoat.
Lamping: Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Wedge base socket type (T3-1/4 or T5).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 20 1/4" (514mm)
Width: 8 3/8" (213mm)

Above: GAML1-AC Small Copper Mushroom PathLyte
Below: GAML2-AC Large Copper Mushroom PathLyte

Above: GAML1-AC Small Copper Mushroom PathLyte
Below: GAML2-AC Large Copper Mushroom PathLyte

Hadco GAML1 & GAML2 Copper Mushroom PathLytes

GAML1-AC
Lamping: 10W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
Height: 12 1/2" (318mm)
Width: 9" (229mm)

GAML2-AC
Lamping: 20W maximum T3 bi-pin lamp.  Lamp is included with fixture.  Lower wattage lamps are acceptable. 
Height: 17 1/8" (435mm)
Width: 11" (279mm)

Housing: Hand-formed solid copper, mushrooms have unique individual tops. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Optical Assembly: Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

More Hadco Copper Path Lights >

Above: GAML1-AC Small Copper Mushroom PathLyte
Below: GAML2-AC Large Copper Mushroom PathLyte

Hadco GAML3 Copper Mushroom PathLytes

Housing: Hand-formed solid copper, mushrooms have unique individual tops. Solid copper stem. Large mushroom is the only one that is illuminated. 1/2" NPS male threads to screw onto accessory mounting stake or junction box, sold separately.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Optical Assembly: Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal.
Lamping: 10W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 14 1/2" (368mm)
Width: 9" (229mm)

More Hadco Copper Path Lights >

Hadco KCL1 Coolie Cap Die-cast Aluminum Low Voltage PathLyte

Housing: All cast aluminum construction. 1/2" Schedule 40 Aluminum stem 18" long threads to screw on to accessory mounting stake or junction box (sold separately).
Finish: Hand-rubbed verde antiqued over Black thermoset powdercoat.
Lamping: Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Wedge base socket type (T3-1/4 or T5).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Height: 20 7/8" (530mm)
Width: 6 1/4" (159mm)

Hadco KC2 Coolie Cap Die-cast Aluminum Line Voltage PathLyte

Lamping: 60W maximum A19 lamp. Lamp is not included. Higher wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with 18 AWG Black, white and ground wires.
Stem and ground stake NOT included on line fixtures (120 Volts).
Height: 8 3/8" (213mm)

Hadco KCL2 Coolie Cap Die-cast Aluminum Low Voltage PathLyte

Lamping: Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Wedge base socket type (T3-1/4 or T5).
Height: 31" (787mm)

Housing: All cast aluminum construction. Cast aluminum decorative coolie cap secured to spider bracket.
Finish: Hand-rubbed verde antiqued over Black thermoset powdercoat.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Width: 11 1/4" (286mm)

Line Voltage Stem Mount PathLyte
Stem and ground stake NOT included on line fixtures (120 Volts)

Low Voltage Stem Mount PathLyte
Aluminum stem accessory mounting stake included

Hadco KC3 Coolie Cap Die-cast Aluminum Line Voltage PathLyte

Lamping: 60W maximum A19 lamp. Lamp is not included. Higher wattages may be used only with glass panels installed. Electrical Assembly: Porcelain medium base socket. Fixture is pre-wired with 18 AWG Black, white and ground wires.
3" Tubing included.
Height: 12" (305mm)

Hadco KCL3 Coolie Cap Die-cast Aluminum Low Voltage PathLyte

Lamping: Lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed. 18W maximum wedge base T-5 Xenon. Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Wedge base socket type (T3-1/4 or T5).
Installation: & Mounting: 42" Extruded aluminum direct burial post.
Height: 33 7/8" (860mm)

Line Voltage Stem Mount PathLyte
On Post Fitter

Low Voltage Stem Mount PathLyte
42" Extruded aluminum direct burial post included