Hadco StepLytes (Step Lights)

Hadco Line Voltage StepLytes

Housing: Fasteners are 300 series stainless steel. Semi-recessed water tight die-cast aluminum with polycarbonate lens. Hinges allow for easy re-lamping. Gasketing is silicone. One (1) ½" NPT conduit tap on the back, two (2) ¾" NPT taps on the bottom and one (1) ¾" NPT tap on each side for easy through-wiring.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White, H Bronze
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy Installation: . Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.

EWR4 Aluminum Step Light
OPTICAL ASSEMblY: Frosted tempered glass lens. Specular aluminum segmented reflector assembly. Electrical Assembly: 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.

Compare Step Lights & Wall Lights...>

Housing Only EWB4-HO

EWR4 Aluminum Step Light

Hadco Low Voltage StepLytes

Lamping: 12" width maximum S-8 (93) lamp. Lamp is included with fixture. Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001:2008 Standards.

RLL1-A Black

Compare Step Lights & Wall Lights...>

RLL2-PC Copper
Housing: Solid copper louvered faceplate with galvanized steel, single gang recessed back box. Fasteners are 300 series stainless steel. Gasketing is diecut neoprene.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.
OPTICAL ASSEMblY: Frosted tempered glass lens. Specular aluminum segmented reflector assembly.

RLL2-SS Stainless Steel Brushed Matte Finish
Housing: Stainless steel louvered faceplate with galvanized steel, single gang recessed back box. Fasteners are 300 series stainless steel. Gasketing is diecut neoprene.
Finish: Finish: Stainless Steel has satin matte finish.
OPTICAL ASSEMblY: Frosted tempered glass lens. Specular aluminum segmented reflector assembly.

Compare Step Lights & Wall Lights...>

RFL1-A Black

Compare Step Lights & Wall Lights...>

Hadco Line Voltage StepLytes

Housing: Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass.
OPTICAL ASSEMblY: Symmetric reflector is precision formed, semi-specular aluminum or highly polished aluminum, which produces a wide symmetric distribution for general area lighting.
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy Installation: . Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.

RSB3 Polycarbonate Step Light

Compare Step Lights & Wall Lights...>

RSC3 Aluminum Step Light

Compare Step Lights & Wall Lights...>

RSC3 Natural Brass Step Light
Natural Brass louver is natural Natural Brass with frosted tempered glass.
Finish: N Natural Brass
Electrical Assembly: 26W Fluorescent socket is a GX24Q-3 base. Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is 12 volt. Internal electronic transformer has 120 volt input. Pre-wired with high temperature 18 AWG wire.

Compare Step Lights & Wall Lights...>