Box Dimensions
8-1/4" (210mm) Long
2-5/8" (57mm) High
3-1/2" (89mm) Deep

Accessories– Mounting Kits same as above

Hadco RSF2 Aluminum Brick Light

RSF2AL5IE Black
RSF2HL5IE Bronze

• 120 Volt
• 40 watt maximum
• T10 Lamp

RSF2AL58E Black
RSF2HL58E Bronze

• 120 Volt
• Two 18 watt maximum
• Two 1141 Lamps (included)
• Integral transformer included

RSF2AL5F13E Black
RSF2HL5F13E Bronze

• 120 Volt
• 13 watt maximum
• PLC13 Lamp

RSFL2AL5812 Black
RSFL2HL5812 Bronze

• 12 Volt
• Two 18 watt maximum
• Two 1141 Lamps (included)
• Remote transformer required

Power Consoles, Transformers & Accessories >

Housing– Back box and trim aluminum die casting containing less than .3% copper to prevent corrosion in concrete applications.

Fasteners– Captive, black oxide stainless steel.

Gasket– Single-piece molded silicone.

Finish– Black or bronze thermoset powder coat.

Lens– Opal Lens– UV-stabilized injection-molded polycarbonate.

Socket– Incandescent, medium base; fluorescent, GX23-2 base; low voltage, single contact bayonet (S-8).

Ballast– Fluorescent shall be core and coil, NPF Class B. Ballasts shall be factory wired and tested. Ballasts rated for 0°C starting temperature.

Wiring Compartment– Internal wiring compartment contains two (2) 1/2" N.P.S. conduit taps in the bottom and one (1) 1/2" N.P.S. conduit tap in both sides. Sockets pre-wired with high temperature #18 wire, low voltage models pre-wired with 6-ft. cord and quick connector.

UL, cUL Listed.

Box Dimensions
8-1/4" (210mm) Long
2-5/8" (57mm) High
3-1/2" (89mm) Deep

Hadco RSS2 Aluminum Brick Light

RSS2AK5IE Black
RSS2HK5IE Bronze

• 120 Volt
• 40 watt maximum
• T10 Lamp
• Internal Louver

RSS2AK5F13E Black
RSS2HK5F13E Bronze

• 120 Volt
• 13 watt maximum
• PLC13 Lamp
• Internal Louver

Accessories– Mounting Kits same as above

Housing– Back box and trim aluminum die casting containing less than .3% copper to prevent corrosion in concrete applications.

Fasteners– Captive, black oxide stainless steel.

Gasket– Single-piece molded silicone.

Finish– Black or bronze thermoset powder coat. Internal Louver– Black anodized 45° cut-off louver.

Lens– Clear Lens– UV-stabilized injection-molded polycarbonate. Socket– Incandescent, medium base; fluorescent, GX23-2 base.

Socket– Incandescent, medium base; fluorescent, GX23-2 base. Ballast– Fluorescent shall be core and coil, NPF Class B. Ballasts shall be factory wired and tested. Ballasts rated for 0°C starting temperature.

Wiring Compartment– Internal wiring compartment contains two (2) 1/2" N.P.S. conduit taps in the bottom and one (1) 1/2" N.P.S. conduit tap in both sides. Sockets pre-wired with high temperature #18 wire, low voltage models pre-wired with 6-ft. cord and quick connector.

UL, cUL Listed.

Photometrics:

Box Dimensions
Height: 2-5/8" (67mm)
Depth: 3-1/2" (89mm)
Length: 8-1/4" (210mm)

Faceplate Dimensions
Height: 3-1/2" (89mm)
Length: 9" (229mm) 1" Projection

Hadco RS2 LED 120 Volt Step Light/Brick Light

RSC2AK5D3E - Black
RSC2HK5D3E - Bronze
RSF2AL5D3E - Black
RSF2HL5D3E - Bronze
RSS2AK5D3E - Black
RSS2HK5D3E - Bronze
RSV2AK5D3E - Black
RSV2HK5D3E - Bronze

• 120 volt
• (3) Three 1 watt Luxeon® white LEDs
• Internal aluminum extrusion heat sink with integral LED power supply

Housing - Back box and trim, marine grade aluminum. Louvered face plate, marine grade aluminum. All others, polycarbonate faceplate.

Fasteners - Captive, black oxide stainless steel.

Gasket - Single-piece molded silicone.

Finish - UV stable polyester powdercoat for excellent weatherability. Available in black or bronze.

Lens - Tempered glass secured behind faceplate.

Ballast - Electronic 120 volt AC to 12 volt DC LED power supply.

Wiring Compartment - Internal wiring compartment contains two (2) 1/2" NPS conduit taps in the bottom and one (1) 1/2" NPS conduit tap in both sides. Supply wires connect directly to the quick connect on the integral power supply.

UL, cUL Listed

Transformers >

RSC2

RSF2

RSS2

RSF2

finishes and Materials

Hadco makes it easier than ever to select the right color for your exquisite landscape
design with a full palette of colors and textures. Expand your design capabilities with new finishes that are sure to compliment your commercial or residential landscape lighting needs.

For an aged appearance, Oiled and Verde Brass materials have been added to the NightLife fixture choices for a step back in time.

And for more earthy settings, there is the Speckled Stone finish, which is at home among foliage as well as any number of masonry materials.