| 
|
 Hadco
LED Bullyte BLN5D4 & BLW5D4 Spots &
Flood Die-cast marine grade aluminum alloy
bullet landscape lighting
BLN5D4-A LED Bullyte - Spot
BLN5D4-H LED Bullyte - Spot
BLW5D4-A LED Bullyte - Flood
BLW5D4-H LED Bullyte - Flood
Housing: Die-cast marine grade aluminum
alloy. Fully rotatable shroud, double gasketed,
die-cast marine grade alloy aluminum. Fully-adjustable
swivel arm with vibration-proof locking
teeth. 1/2 " NPS male threads to
screw on to accessory mounting stake or
junction box, sold separately. Fasteners
are 300 series stainless steel. Gasketing
is silicone.
Finish: Thermoset polyester powdercoat
is electrostatically applied after a five-stage
conversion cleaning process and bonded by
heat fusion thermosetting. Laboratory tested
for superior weatherability and fade resistance
in accordance with ASTM B-117-64 and ANSI/ASTM
G53-77 specifications. |
| Optical Assembly: Integral
collimating flood (25°) optics. Clear
tempered glass affixed at 10° angle
for natural cleaning.
Lamping: Type 3 Luxeon® high-output
LEDs powered at 700mA to operate for 50, 000
hours.
Electrical Assembly: Input voltage range
(VAC): 10.8 - 17.5. Input frequency: 60Hz.
Integral surge protector built into LED
driver circuit. 12 volts, 12.4 total watts.
12 Volt fixture is pre-wired with 3-ft pigtail
of 18-2 AWG, 105° C, SPT-1 wire. Low
voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply
cable, not included. 12 Volt system requires
remote transformer, not included. |
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
IP Rating: IP66: Dust-tight and sealed
against direct jets of water.
Height: 2 3/8" (60mm)
Width: 2 13/16" (71mm)
Length: 5 13/16" (147mm)
Max. Weight: 2.6 lb.
Finish: A Black, H Bronze |
|
| 
 |
MGM1 Louver
MLB1 Ice Blue Lens
MLS1 Spread Lens |
|
Hadco
BUL16 Composite (BC16)
BUL16-A Black
BUL16-G Verde
BUL16-H Bronze
- 12 Volt
- Clear Tempered Lens
- 50 watt maximum
- MR16 Lamp
- 1/2" N.P.S. fitter
Housing - One-piece injection molded Ryton
PPS with fully adjustable swivel
arm with vibration-proof locking teeth.
Shroud - Fully rotatable, gasketed, composite.
Finish - Color impregnated material in
black, hand rubbed verde antiqued over black,
or bronze.
Lens - Clear tempered glass affixed at
10° angle for natural cleaning.
Socket - Bi-pin type (GU5.3).
Wiring - Pre-wired with a 3-ft. pigtail
and a quick connector for easy hookup to
the supply cable.
UL, cUL Listed.
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
120 Volt BT711 Aluminum Bullet
Encapsulated Integral Transformer Converts
existing 120 volt systems for use with energy-efficient
halogen lamps.
Dimensions |
Height: |
6 1/2" (165mm) |
Depth: |
4" (102mm) |
Width: |
2" (51mm) |
 BT711-A
- Black
BT711-G - Verde
BT711-H - Bronze
- 120 volt
- 35 watt maximum (MR11)
- 20 watt maximum (T3 halogen)
- 1/2" NPS fitter
- Integral stepdown transformer
Housing - Cast aluminum with fully adjustable
swivel arm, with vibration-proof locking
teeth.
Shroud - Fully rotatable, gasketed, cast
aluminum.
Finish - UV stable polyester powdercoat
for excellent weatherability. Available
in black, verde or bronze.
Lens - Clear tempered glass.
Socket - Ceramic bi-pin quartz socket for
use with G4 lamps.
Electrical - Stepdown transformer reduces
line voltage to 12 volts. Transformer is
potted/encapsulated and features thermal
overload protection.
Wiring - Pre-wired with #18 AWG black,
white and ground.
UL, cUL Listed
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
120 Volt BT5016 Aluminum Bullet
Encapsulated Integral Transformer Converts
existing 120 volt systems for use with energy-efficient
halogen lamps.
Dimensions |
Height: |
7" (178mm) |
Depth: |
5-13/16" (148mm) |
Width: |
2-13/16" (71mm) |
BT5016-A - Black
BT5016-G - Verde
BT5016-H - Bronze
- 120 volt
- 50 watt maximum
- MR16
- 1/2" NPS fitter
- Integral stepdown transformer
Housing - Cast aluminum with fully adjustable
swivel arm, with vibration-proof locking
teeth.
Shroud - Fully rotatable, gasketed, cast
aluminum.
Finish - UV stable polyester powdercoat
for excellent weatherability. Available
in black, verde or bronze.
Lens - Clear tempered glass affixed at
10 degree angle for natural cleaning.
Socket - Ceramic bi-pin quartz socket for
use with GU5.3 lamps.
Electrical - Stepdown transformer reduces
line voltage to 12 volts. Transformer is
potted/ encapsulated and features thermal
overload protection.
Wiring - Pre-wired with #18 AWG black,
white and ground.
UL, cUL Listed
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
120 Volt BT1 Aluminum Bullet
Encapsulated Integral Transformer Converts
existing 120 volt systems for use with energy-efficient
halogen lamps.
BT1-AL - Black, Long Shroud
BT1-HL - Bronze, Long Shroud
BT1-AS - Black, Short Shroud
BT1-HS - Bronze, Short Shroud
- 120 volt
- 75 watt maximum
- MR16
- 1/2" NPS fitter
- Integral stepdown transformer
Housing - Cast aluminum with fully adjustable
swivel arm, with vibration-proof locking
teeth.
Shroud - Fully rotatable, gasketed, cast
aluminum (short and long shroud options).
Finish - UV stable polyester powdercoat
for excellent weatherability. Available
in black or bronze.
Lens - Clear tempered glass.
Socket - Ceramic bi-pin quartz socket for
use with GU5.3 lamps.
Electrical - Stepdown transformer reduces
line voltage to 12 volts. Transformer is
potted/ encapsulated and features thermal
overload protection.
Wiring - Pre-wired with #18 AWG black,
white and ground.
UL, cUL Listed
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
BL711 12 Volt Aluminum
BL711-A Black
BL711-G Verde
BL711-H Bronze
BL711-T Speckled Stone
BL711-U Sienna
- 12 Volt
- 35 watt maximum (MR11 Lamp)
- 20 watt maximum (T3 halogen)
- 1/2" N.P.S. fitter
Housing- Die cast aluminum with fully adjustable
swivel arm with vibration-proof locking
teeth.
Shroud- Fully rotatable, gasketed, cast
aluminum.
Finish- Black, hand rubbed verde antiqued
over black thermoset powder coat, bronze,
sienna or speckled stone thermoset powder
coat.
Lens- Clear tempered glass.
Socket- Bi-pin type (G4).
Wiring- Prewired with a 3-ft. pigtail and
a quick connector for easy hookup to the
supply cable. UL, cUL Listed.
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
BL756 12 Volt Aluminum
BL756-A Black
BL756-G Verde
BL756-H Bronze
BL756-T Speckled Stone
BL756-U Sienna
- 12 Volt
- 27 watt maximum
- 1156 Lamp (included)
- 1/2" N.P.S. fitter
Housing- Die cast aluminum with fully adjustable
swivel arm with vibration-proof locking
teeth.
Shroud- Fully rotatable, gasketed, cast
aluminum.
Finish- Black, hand rubbed verde antiqued
over black thermoset powder coat, bronze,
speckled stone or sienna thermoset powder
coat.
Lens– Clear tempered glass.
Socket– Single contact bayonet (S-8).
Wiring– Prewired with a 3-ft. pigtail
and a quick connector for easy hookup to
the supply cable.
UL, cUL Listed.
Power
Consoles, Transformers, Stakes, Posts &
Accessories > |
|
|
Hadco
BL16 Brass
BL16-N Natural Brass
BL16-OB Oiled Brass
- 12 Volt
- 50 watt maximum
- MR16 Lamp
- Long Shroud
- 1/2" N.P.S. fitter
Housing - Die cast brass with fully adjustable
swivel arm with vibration-proof locking
teeth.
Shroud - Fully rotatable, gasketed, cast
brass.
Finish - Natural brass or oiled brass.
Lens - Clear tempered glass affixed at
10 degree angle for
natural cleaning.
Socket - Bi-pin type (GU5.3).
Wiring - Pre-wired with a 3-ft. pigtail
and a quick connector for easy hookup to
the supply cable.
UL, cUL Listed.
Power
Consoles, Transformers, Stakes, Posts &
Accessories >
|
MGM1 Louver
MLB1 Ice Blue Lens
MLS1 Spread Lens |
|
|
|
Hadco
CUL16 12 Volt Copper Accent Lighting
CUL16 Copper
- 12 Volt
- 35 watt maximum (20 watt included)
- MR16 lamp
- 1/2" NPS fitter
Material- Machined solid copper with fully
adjustable natural brass swivel arm and
brass fastener.
Finish- Natural copper will patina with
age.
Lens- Clear tempered glass.
Socket- Bi-pin type.
Wiring- Pre-wired with a 3-ft. pigtail
and a quick connector for easy hookup to
the supply cable.
UL, cUL Listed.
See
More Copper Landscape Lighting > |
|
|
Hadco
BU4 Composite (BC4)
Standard 120 Volt
BU4-A Black
BU4-G Verde
BU4-H Bronze
- 120 Volt
- 150 watt maximum
- PAR38/R40 Lamp
- 1/2" N.P.S. fitter
- Shrouds optional
- H.I.D. compatible
H.I.D. Models
BUN4-AL Black, Long Shroud,
Narrow Reflector
BUN4-HL Bronze, Long Shroud, Narrow
Reflector
BUN4-AS Black, Short Shroud, Narrow
Reflector
BUN4-HS Bronze, Short Shroud, Narrow
Reflector
BUW4-AL Black, Long Shroud, Wide
Reflector
BUW4-HL Bronze, Long Shroud, Wide
Reflector
BUW4-AS Black, Short Shroud, Wide
Reflector
BUW4-HS Bronze, Short Shroud, Wide
Reflector
- 120 Volt
- 175 watt maximum
- E17 Lamp
- 1/2" N.P.S. fitter
- Order remote ballast housing
Housing - One-piece injection molded Ryton
PPS with fully
adjustable swivel arm with vibration-proof
locking teeth.
Shroud - BU4, optional (see below). BUN4
and BUW4
shroud included.
Finish - Color impregnated material in
black, hand rubbed
verde antiqued over black, or bronze.
Lens - BUN4, BUW4 clear convex tempered
glass included with shroud. BU4 lens provided
with optional shroud only.
Socket - Porcelain medium base.
Wiring - Pre-wired with high temperature
#18 wire.
UL, cUL Listed.
 |
ML4 Louver for BU4 |
 |
Shrouds for BU4
4CGLC and 4CHSC |
|
|
|
