Hadco RRB1 Aluminum 12 Volt or 120 Volt Mini Step Light

RRB1I-A Black
RRB1I-H Bronze

• 120 Volt
• 15 watt maximum
• T7 Lamp

RRBL13-A Black
RRBL13-H Bronze

• 12 Volt
• 12 Watt Max
• 93 Lamp (included)

RRBL14-A Black
RRBL14-H Bronze

• 12 Volt
• 10 watt maximum
• T3 Halogen Lamp

Housing– Back box and trim are aluminum die casting containing less than .3% copper to prevent corrosion in concrete applications. Face plate is UV stabilized, injection molded polycarbonate.

Fasteners– Captive, black oxide stainless steel.

Gasket– Single piece molded silicone.

Finish– Black or bronze thermoset powder coat.

Lens– Bubble lens is clear UV-stabilized injection molded polycarbonate.

Reflector– High performance aluminum reflector assemblies for optimum symmetrical light output.

Socket– Low voltage, single contact bayonet (S-8) or bi-pin G4. Incandescent, double contact bayonet.

Wiring Compartment– Recessed housing contains two (2) 1/2" N.P.S. conduit taps in bottom and one (1) 1/2" N.P.S. conduit tap in both sides. Side mount junction box removable from inside housing. Sockets pre-wired with high temperature #18 wire; low voltage models pre-wired with 6-ft. cord and quick connector.

UL, cUL Listed.

Power Consoles, Transformers & Accessories >

Box Dimensions
3-1/4" (83mm) Width
3-1/2" (89mm) deep

Hadco RRCBL1 Aluminum 12 Volt Mini Step Light

RRCBL1-A Black
RRCBL1-B White
RRCBL1-H Bronze

• 12 Volt
• 50 watt maximum
• MR16 Lamp

Housing– One-piece cast aluminum housing, cast aluminum face plate with stainless steel fasteners.

Finish– Thermoset powder coat in black, white or bronze.

Lens– Tempered glass spread lens.

Socket– Bi-pin type (GU5.3).

Wiring– Pre-wired with 6-ft. cord and quick connector for easy hookup to the supply cable.

UL, cUL Listed.

Power Consoles, Transformers & Accessories >

Box Dimensions
4-3/16" (106mm) Width
3-1/8" (86mm) deep