Mini Step Lights, Mini Wall Lights & Deck Lights

NSL LEDMDS LED MiniDisc Scoop Light

The scoop cover version of NSL's popular LED MiniDisc Light The perfect mini light for outlining and illuminating architectural features located almost anywhere indoors or outdoors. Offered in 5 LED colors and 4 cover colors.

With energy usage a low 0.54 watt per fixture and LED live of 60, 000 hours, LED MiniDisc are UL Listed for all wet, IC, ceiling and direct burial applications. A surprising total of 100 fixtures can be powered from just one 60W Class 2 LED Driver.

Features

• 60,000 hours LED life
• Low energy requirements 0.54 watts per fixture
• UL listed for in-wall, in-Floor, outdoor wet and outdoor burial applications
• Up to 100 fixtures per power supply
• 6 LED colors: Warm White, Cool White, Blue, Green, Red, Amber
• Cover Color Options: Aluminum, Bronze, White and Black
• Fits in any 1" Width hole, 3 1/2" long
• Safe 12 volt, Class 2 power supply (not included)

NSL LEDMDS LED MiniDisc Scoop Light >

Aluminum finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

Bronze finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

White finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

Black finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

LEDDR-12-60W

12V, 60W, Class 2 LED Driver

UL Listed indoor and outdoor usage. Requires 110VAC to be hardwired to driver. Ships complete with one UR Listed low voltage output strain relief. Strain relief includes a gland with three 18g holes (three separate output lines of LED MiniDiscs).

Hadco RRCBL1 Aluminum 12 Volt Mini Step Light

Housing: One-piece cast aluminum housing, cast aluminum (copper free) faceplate. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White, H Bronze
OPTICAL ASSEMBLY: Tempered glass spread lens.
Lamping: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Lamp is not included.
Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco Mini StepLytes (Step Lights) >

NSL LEDMD LED MiniDisc Light

The perfect mini light for outlining and illuminating architectural features located almost anywhere indoors or outdoors. Offered in 6 LED colors and 4 cover colors.

With energy usage a low 0.54 watt per fixture and LED live of 60, 000 hours, LED MiniDisc are UL Listed for all wet, IC, ceiling and direct burial applications. A surprising total of 100 fixtures can be powered from just one 60W Class 2 LED Driver.

Features

• 60, 000 hours LED life
• Low energy requirements 0.54 watts per fixture
• UL listed for in-wall, in-Floor, outdoor wet and outdoor burial applications
• Up to 100 fixtures per power supply
• 6 LED colors: Warm White, Cool White, Blue, Green, Red, Amber
• Cover Color Options: Aluminum, Bronze, White and Black
• Fits in any 1" Width hole, 3 1/2" long
• Safe 12 volt, Class 2 power supply (not included)

NSL LEDMD LED MiniDisc Light >

Aluminum finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

Bronze finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

White finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

Black finish cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

Stainless Steel cover
LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red

LEDDR-12-60W

12V, 60W, Class 2 LED Driver

UL Listed indoor and outdoor use. Requires 110VAC to be hardwired to driver. Ships complete with one UR Listed low voltage output strain relief. Strain relief includes a gland with three 18g holes (three separate output lines of LED MiniDiscs).
LEDDR-12-60W can drive up to 100 LED MiniDiscs.

Hadco Low Voltage Mini StepLytes

Housing: Housing and finish ring are die-cast aluminum. Aluminum housing contains less than 0.3% copper to prevent corrosion in concrete applications. Flange made of die-cast aluminum containing less than 0.3% copper to resist corrosion. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Fasteners are 300 series stainless steel.  Internal wiring compartment contains two (2) 1/2" NPT conduit taps in the bottom and one (1) 1/2" NPT conduit tap in both sides. A removable plug will be provided for one (1) tap. 
12 Volt Electrical Assembly: Single contact bayonet (S-8). Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
120 Volt Electrical Assembly: Fixture is pre-wired with 18 AWG black, white, and ground wires. Double contact bayonet socket type (BA15d).
ACCESSORIES: MAKM - Masonry construction mounting kit. MAKNS - New stud wall construction mounting kit. MAKES - Existing stud wall construction mounting kit.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.

Note: All units supplied with mounting hardware for concrete pour Installation: . If other mounting kits are required, order accessory above.

Hadco Mini StepLytes (Step Lights) >

Hadco Line Voltage Mini StepLytes

Housing: Die-cast aluminum. Internal wiring compartment contains two (2) ½" NPT conduit taps in the bottom and one (1) ½" NPT conduit tap in both sides. A removable plug will be provided for one (1) tap. Gasketing is silicone. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Fasteners are 300 series stainless steel.
Finish: Zinc-rich primer and thermoset powdercoat for durability.
OPTICAL ASSEMBLY: Symmetric reflector is precision formed, semi-specular aluminum or highly polished aluminum, which produces a wide symmetric distribution for general area lighting. UV stabilized injection molded clear polycarbonate bubble lens, allowing positioning of lamp to project out of the wall enabling and efficient wide distribution.
Electrical Assembly: 26W Fluorescent socket is a GX24Q-3 base. 32W Fluorescent socket is a GX24Q-3 base. 42W Fluorescent socket is a GX24Q-4 base. Bi-pin socket type (GY6.35) with 250° C high temperature teflon coated wire leads. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is pre-wired with 18 AWG black, white, and ground wires.
BALLAST: HID ballasts are HPF core and coil, factory wired and tested, mounted to a key-slotted removable tray with quick disconnect for easy Installation: . Ballasts shall provide +/-5% lamp power regulation with +/-10% input voltage regulation. Fluorescent ballast is electronic (-20° F cold weather start).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.

Hadco Mini StepLytes (Step Lights) >

Hadco LineLyte 12 Volt Copper Step Light

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6" to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

Above: LLL AC Antique Copper StepLytes
Below: LLL SS Stainless Steel StepLytes

Mount using Stainless wood screws (supplied) via key slots or use Mounting Plate MPLLL.

LineLyte Copper StepLyte & Deck Lights

AC Antique Copper StepLyte
Housing: Seamless solid copper extrusions with solid copper ends. Tool-less lamp access.
Finish: Natural Copper is bright polished, untreated copper. Color will age naturally to a fine dark copper patina.

SS Stainless Steel StepLyte
Housing: Stainless Steel. Bottom is open. Tool-less lamp access. Easy access to lamp.
Finish: Linear machine brushed, satin appearance.

OPTICAL ASSEMBLY: Reflector is Stainless Steel.
Lamping: 10W wedge base T3 1/4 (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lower wattage lamps are acceptable. Lamp does not need to be protected and can be directly handled.
Electrical Assembly: Wedge base socket type (T3-1/4 or T5). Socket is hinged for easy relamping. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots. Or use Mounting Plate MPLLL.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 1" (25mm)
Width: 1" (25mm)

Hadco Copper Landscape Lighting >

LineLyte Mounting Plate (MPLLL)

Finish: Stainless Steel has satin matte finish. Natural Copper is bright polished, untreated copper that will age naturally to a fine dark copper patina.
Mounting: Brackets attach to LineLyter with two hex nuts (included).

Bracket is inserted between two blocks or bricks, held in place by the top block.

Hadco Copper DeckLytes GADL1, GADL2, CUL20

Housing: Hand-formed solid copper. Copper back plate.
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled.
Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco Copper Landscape Lighting >

Hadco Copper DeckLytes GADL7, GADL8, GADL9

Housing: Hand-formed solid copper.
Finish: Natural copper with hand-applied oxide coating for pre-aged appearance. Will age naturally to a fine patina.
Finish: AC Hand-Crafted Copper
Lamping: Higher wattages may be used only with glass panels installed. 10W maximum wedge base T-5 Xenon.
OPTICAL ASSEMBLY: Opalescent Honey Glass panel is sealed with silicone inside Copper fixture.
Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Wedge base socket type (T3-¼ or T5).
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.

Hadco Copper Landscape Lighting >

Hadco Copper DeckLytes GACL1, GACL2

Housing: Hand-formed solid copper.
Finish: Antique Copper (AC) is a hand-applied dark copper patina.
Finish: AC Hand-Crafted Copper
Lamping: 12" width maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled. Lower wattage lamps are acceptable.
Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco Copper Landscape Lighting >

Hadco DeckLytes DUL1 Composite, DCL1 Brass, DAL1 Aluminum, DAL1-SS Stainless Steel

OPTICAL ASSEMBLY: Frosted, annealed glass lens Reflector is a stamped specular aluminum.
Lamping: 10W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Lower wattage lamps are acceptable.
Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco DeckLytes (Deck Lights) >

Hadco DeckLyte DUL1 Composite
Housing: One-piece injection molded ULTEM^® High Performance Polymer composite. Fasteners are 300 series stainless steel.
Finish: Composite is textured, pressure formed, molded-in-color.
Finish: image A Black, G Verde, H Bronze
WARRANTY: Ten-year limited warranty.

Hadco DeckLyte DCL1 Brass
Housing: Die-cast brass. Fasteners are 300 series stainless steel.
Finish: Natural Brass (N) is as-cast and tumble polished.
Finish: N Natural Brass
WARRANTY: Lifetime limited warranty.

Hadco DeckLyte DAL1 Aluminum
Housing: Body and mounting plate are cast aluminum construction. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White, G Verde, H Bronze, T Speckled Stone, U Sienna
WARRANTY: Three-year limited warranty.

Hadco DeckLyte DAL1-SS Stainless Steel
Housing: Body and mounting plate are cast stainless steel construction.
Fasteners are 300 series stainless steel.
Finish: Linear machine brushed, satin appearance.
Finish: SS Stainless steel (Matte Finish)
WARRANTY: Lifetime limited warranty.

Hadco DeckLytes SRL3, SRL4

Housing: Die-cast aluminum. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Lamping: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco DeckLytes (Deck Lights) >

Hadco DeckLytes SRL3
Finish: A Black, H Bronze
OPTICAL ASSEMBLY: Frosted tempered glass lens.
Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Hadco DeckLytes SRL4
Finish: A Black, B White, G Verde, H Bronze
Electrical Assembly: Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Hadco Aluminum DeckLytes DSL1, DSL2

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black, B White
Lamping: 18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.
OPTICAL ASSEMBLY: Frosted tempered glass lens.
Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation: & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Hadco DeckLyte DSL1
Housing: Machined aluminum top cap and cast aluminum body. Fasteners are 300 series stainless steel.

Hadco DeckLytes (Deck Lights) >
Hadco DownLytes (Down Lights) >

Hadco DownLyte DSL2
Housing: Machined aluminum top cap and cast aluminum body with adjustable yoke. Fasteners are 300 series stainless steel.

Hadco DeckLytes (Deck Lights) >
Hadco DownLytes (Down Lights) >

Hadco Aluminum DeckLyte DHL1

Housing: All cast aluminum construction.
Finish: Black thermoset, hand rubbed-verde antiqued over black thermoset powdercoat, or bronze thermoset powdercoat.
Finish: image A Black, H Bronze, G Verde
Lamping: Lamp is included with fixture. 7W maximum wedge base T-5 Xenon. Xenon lamp life is approximately 10,000 hours. Higher wattages may be used only with glass panels installed.
Electrical Assembly: 12 Volt system requires remote transformer, not included. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt fixture is pre-wired with 4-ft pigtail of 18-2 AWG. Wedge base socket type (T3-1/4 or T5).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.

Hadco DeckLytes (Deck Lights) >

Hadco RL13 Composite Low Voltage DeckLyte

Housing: Injection-molded RYTON^® composite and polycarbonate. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. Composite is textured, pressure formed, molded-in-color.

Hadco DeckLytes (Deck Lights) >

Bruck Lighting Ledra AL-J LED Step Lights

Bruck Lighting LEDRA™ AL-C

Ask about FREE SHIPPING*
& Additional Discounts on Bruck Lighting

The Bruck LEDRA AL-C hard anodized aluminum housing and decorative collar with 3/8" thick tempered borosilicate glass dome. Provided with an integral driver enclosed in the housing. The LEDRA AL-C attaches is an ideal decorative light point especially for difficult to access locations. Suitable for wet locations.

Technical Specs:
100-240V AC, 50/60Hz input
700mA DC constant current output
6VA, 3W for 1 (3 Watt LED)
White source of 140 lumens
Warm White source of 120 lumens

Listed for wet locations
Short circuit protection
Overload protection
Thermal protection

Bruck Lighting System LEDRA >