Above: WAC WL-LED100-C
Below:
WAC WL-LED200-C
|
WAC
LEDme® Step & Wall Lights
DIMMABLE
With a sleek profile and no visible hardware, LEDme Step and Wall Lights are designed to seamlessly blend into any architecture.
These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs,
walls and walkways with little or no glare. Fixture is sealed for both indoor and outdoor applications.
- Amber color lens available
- 316 marine grade, casted stainless steel (SS) construction
- BN, BZ and WT models are constructed of die-cast aluminum
- Direct wiring, no driver needed
- Low profile, flush to wall aesthetics with no visible hardware
- 40,000 hour rated life
- Fits into 2" × 4" J-Box with minimum inside dimensions of 3"L × 2"W × 2"H
- Balanced lighting, free of shadows with minimum glare
- Up to 200 fixtures can be connected in parallel
- Wet location rated to IP66 standards for indoor and outdoor installations
- Replaceable LED module
- High Color Rendering Index (CRI) for true color
- May be dimmed with electronic low voltage (ELV) dimmer
WAC LEDme Step & Wall Lights >
 WAC
LEDme WL-LED100 LEDme® Step & Wall Lights
WL-LED100 LED Step Light Rectangular Scoop
from $103.50
WL-LED100-AM
WL-LED100-C
Finish: BN-Brushed Nickel, BZ-Bronze, SS-Stainless Steel, WT-White
Input: 120V
Power Consumption: 3.9W
Lumens: 68Lm (LED100), 63Lm (LED200)
Colors: Amber or 3000K White
CRI: 83
WAC
LEDme WL-LED200 LEDme® Step & Wall Lights
WL-LED200 LED Step Light Vertical Scoop from
$103.50
WL-LED200-AM
WL-LED200-C
Finish: BN-Brushed Nickel, BZ-Bronze, SS-Stainless Steel, WT-White
Input: 120V
Power Consumption: 3.9W
Lumens: 68Lm (LED100), 63Lm (LED200)
Colors: Amber or 3000K White
CRI: 83 |
Above: WAC WL-LED300-C |
WAC
LEDme WL-LED300 LEDme® Step & Wall Lights
WL-LED300 LED Step Light Circular Scoop $103.50
BN-Brushed Nickel, BZ-Bronze, WT-White
- Direct wiring, no driver needed
- Low profile, flush to wall aesthetics with no visible hardware
- 40,000 hour rated life
- Balanced lighting, free of shadows with minimum glare
- Up to 200 fixtures can be connected in parallel
- Wet location rated to IP66 standards for indoor and outdoor installations
- Supplied with junction box for recessed installation
- Die-cast aluminum construction
- Replaceable LED module
- High Color Rendering Index (CRI) for true color
- May be dimmed with electronic low voltage (ELV) dimmer
WAC LEDme Step & Wall Lights >
WL-LED300-C
Finish: BN-Brushed Nickel, BZ-Bronze, WT-White |
Above: WAC WL-LED310-C |
WAC
LEDme WL-LED310 LEDme® Step & Wall Lights
WL-LED310 LED Step Light Circular Face $103.50
BN-Brushed Nickel, BZ-Bronze, WT-White
- Direct wiring, no driver needed
- Low profile, flush to wall aesthetics with no visible hardware
- 40,000 hour rated life
- Balanced lighting, free of shadows with minimum glare
- Up to 200 fixtures can be connected in parallel
- Wet location rated to IP66 standards for indoor and outdoor installations
- Supplied with junction box for recessed installation
- Die-cast aluminum construction
- Replaceable LED module
- High Color Rendering Index (CRI) for true color
- May be dimmed with electronic low voltage (ELV) dimmer
WAC LEDme Step & Wall Lights >
WL-LED300-C
Finish: BN-Brushed Nickel, BZ-Bronze, WT-White |
|
|
NSL LED Step Star Step Light & NSL Xenon
Step Lights
Self-contained, complete die cast aluminum recessed 120VAC step light, wall light or ceiling recessed fixture.
Step Lights are 7 1/2" x 4".
LST LED Step Star Step Light from $109.95
Uses only 5.2 watts. Can be parallel wired ("daisy chained") up to 150 fixtures per circuit.
NSL LED Step Star >
XSL Xenon Step Light $59.95
Uses only 18 watts. Can be parallel wired ("daisy chained") up to 66 fixtures per 15A tap.
NSL Xenon Step Lights >
Louver,
Prism or
Scoop Cover
White,
Bronze,
Black or
Aluminum finish.
Indoor or Outdoor.
Rated for Wet Location, Insulation Contact, Wall or Ceiling, Showers, Poured Concrete.
Dimmable! |
|
| |
Hadco Low Voltage StepLytes
Lamping: 12" width maximum S-8 (93) lamp. Lamp
is included with fixture.
Electrical Assembly: Single contact bayonet
(S-8). 12 volt fixture is pre-wired with
6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1W
wire. Low voltage quick connector, catalog
#LVC3 included for easy hook-up to the low
voltage supply cable, not included. 12 Volt
system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: Manufactured to ISO 9001:2008
Standards.
Hadco
StepLytes (Step Lights) > |
 |
RLL1-A
Black
Housing: Die-cast aluminum faceplate with galvanized
steel, single gang recessed box with stainless
steel fasteners. Gasketing is diecut neoprene.
Finish: Thermoset polyester powdercoat is electrostatically
applied after a five-stage conversion cleaning
process and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability
and fade resistance in accordance with ASTM
B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black
Optical Assembly: Frosted tempered glass lens. |
 |
RLL2-PC
Copper
Housing: Solid copper louvered faceplate with
galvanized steel, single gang recessed back
box. Fasteners are 300 Series stainless steel.
Gasketing is diecut neoprene.
Finish: Natural Copper is bright polished,
untreated copper. Color will age naturally
to a fine dark copper patina.
Optical Assembly: Frosted tempered glass lens.
Specular aluminum segmented reflector assembly. |
 |
RLL2-SS
Stainless Steel Brushed Matte Finish
Housing: Stainless steel louvered faceplate
with galvanized steel, single gang recessed
back box. Fasteners are 300 Series stainless
steel. Gasketing is diecut neoprene.
Finish: Finish: Stainless Steel has satin matte
finish.
Optical Assembly: Frosted tempered glass lens.
Specular aluminum segmented reflector assembly. |
 |
RFL1-A
Black
Housing: Die-cast aluminum faceplate with galvanized
steel, single gang recessed box with stainless
steel fasteners. Gasketing is diecut neoprene.
Finish: Thermoset polyester powdercoat is electrostatically
applied after a five-stage conversion cleaning
process and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability
and fade resistance in accordance with ASTM
B-117-64 and ANSI/ASTM G53-77 specifications.
Finish: A Black
Optical Assembly: Frosted tempered glass lens. |
|
| |
Hadco Line Voltage StepLytes
Housing: Die-cast aluminum back box contains
less than 0.3% copper to prevent corrosion
in concrete or masonry applications. Cast
bronze fixture has polycarbonate, color impregnated,
dark bronze finish. Die-cast copper-free
aluminum with 45° cutoff, with frosted tempered
glass.
Optical Assembly: Symmetric reflector is
precision formed, semi-specular aluminum
or highly polished aluminum, which produces
a wide symmetric distribution for general
area lighting.
BALLAST: HID ballasts are HPF core and coil,
factory wired and tested, mounted to a key-slotted
removable tray with quick disconnect for
easy Installation. Ballasts shall provide
+/-5% lamp power regulation with +/-10% input
voltage regulation. Fluorescent ballast is
electronic (-20° F cold weather start).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety
standards for wet locations. cETL listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2008 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
Hadco
StepLytes (Step Lights) > |
 |
RSB3
Polycarbonate Step Light
Housing: Clear UV stabilized injection molded
polycarbonate bubble faceplate.
Finish: Zinc-rich primer and thermoset powdercoat
for durability.
Finish: A Black, H Bronze
Electrical Assembly: 32W Fluorescent socket
is a GX24Q-3 base. 42W Fluorescent socket is
a GX24Q-4 base. Pre-wired with high temperature
18 AWG wire. 26W Fluorescent socket is a GX24Q-3
base. Bi-pin socket type (GY6.35) with 250°
C high temperature teflon coated wire leads.
4kv rated medium base porcelain socket. Nickel-plated
screw shell with center contact. |
 |
RSC3
Aluminum Step Light
Die-cast aluminum trim ring contains less than
0.3% copper to resist corrosion.
Finish: Zinc-rich primer and thermoset powdercoat
for durability.
Finish: A Black, B White, H Bronze
Electrical Assembly: 26W Fluorescent socket
is a GX24Q-3 base. Bi-pin socket type (GY6.35)
with 250° C high temperature teflon coated
wire leads. 4kv rated medium base porcelain
socket. Nickel-plated screw shell with center
contact. Fixture is 12 volt. Internal electronic
transformer has 120 volt input. Pre-wired with
high temperature 18 AWG wire. |
 |
RSC3
Natural Brass Step Light
Natural Brass louver is natural Natural Brass
with frosted tempered glass.
Finish: N Natural Brass
Electrical Assembly: 26W Fluorescent socket
is a GX24Q-3 base. Bi-pin socket type (GY6.35)
with 250° C high temperature teflon coated
wire leads. 4kv rated medium base porcelain
socket. Nickel-plated screw shell with center
contact. Fixture is 12 volt. Internal electronic
transformer has 120 volt input. Pre-wired with
high temperature 18 AWG wire. |
|
| |
Hadco
Line Voltage StepLytes
Housing: Fasteners are 300 Series stainless
steel. Semi-recessed water tight die-cast
aluminum with polycarbonate lens. Hinges
allow for easy re-lamping. Gasketing is silicone.
One (1) ½" NPT conduit tap on the back,
two (2) 3/4" NPT taps on the bottom and
one (1) 3/4" NPT tap on each side for
easy through-wiring.
Finish: Thermoset polyester powdercoat is
electrostatically applied after a five-stage
conversion cleaning process and bonded by
heat fusion thermosetting. Laboratory tested
for superior weatherability and fade resistance
in accordance with ASTM B-117-64 and ANSI/ASTM
G53-77 specifications.
Finish: A Black, B White, H Bronze
BALLAST: HID ballasts are HPF core and coil,
factory wired and tested, mounted to a key-slotted
removable tray with quick disconnect for
easy Installation. Ballasts shall provide
+/-5% lamp power regulation with +/-10% input
voltage regulation. Fluorescent ballast is
electronic (-20° F cold weather start).
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety
standards for wet locations. cETL listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2008 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
Hadco StepLytes (Step Lights) > |
 |
EWB4 Aluminum Step Light
Optical Assembly: Specular aluminum formed reflector. U.V. stabilized, clear
polycarbonate lens.
Electrical Assembly: Bi-pin socket type (G12) for T6 lamps, with 250° Celsius
high temperature teflon coated wire leads. 4kv rated medium base porcelain
socket. Nickel-plated screw shell with center contact. |
 |
EWR4
Aluminum Step Light
Optical Assembly: Frosted tempered glass lens. Specular aluminum segmented reflector assembly.
Electrical Assembly: 32W Fluorescent socket
is a GX24Q-3 base. 42W Fluorescent socket
is a GX24Q-4 base. 4kv rated medium base
porcelain socket. Nickel-plated screw shell
with center contact. |
EWB4 Aluminum Step Light |
EWR4 Aluminum Step Light |
|
|
Dabmar
LV-LED60 Recessed Step and Wall
Light
An excellent durable choice for commercial
or residential lighting.
Housing Material: Powder Coated Cast Aluminum
Available Finish: Stainless Steel
Cover Material: Stainless Steel
Lens: Crystal Lens
Pre-Wired with UL Listed Direct Burial Wire/Cable
ETL Approval Pending
Dimensions: 3.25"
Outside Dimension 5.5" x 5.5"
Depth 7/8"
| LV-LED60/B |
25 LEDs |
3W |
Blue |
12V |
Lamp Included |
| LV-LED60/G |
25 LEDs |
3W |
Green |
12V |
Lamp Included |
| LV-LED60/R |
25 LEDs |
3W |
Red |
12V |
Lamp Included |
| LV-LED60/W |
25 LEDs |
3W |
White |
12V |
Lamp Included |
|
|
|
Dabmar
LV-LED55 In-Ground Drive-Over Paver
Light
An excellent durable choice for commercial
or residential lighting.
Material: Rated Drive-Over Glass
Lamp: LED 4W 12V Multi-Color included
Pre-Wired with UL Listed Direct Burial Wire/Cable
ETL Approval Pending
Dimensions: Top 3 5/8"
Outside Dimension 4" x 4"
Height 2 3/8"
Socket 1 1/2"
LVT25 - Transformer with Controller Required,
Sold Separately |
|
