Picture Lights

Tech Lighting Joshua and Meg Picture Lights

These elegant, unobtrusive picture lights are designed to properly illuminate artwork without glare. Mounting bracket is grooved to hold picture hanging wire securely. Maximum weight of picture 50 lbs. By changing lamps or adding a lens, Joshua can light an area as small as four inches square or as large as four feet square, and Meg can light an area as small as eight inches square or as large as two feet square. See chart below. J-Box mount version mounts to any standard juction box. Plug-in version has 10’ cord with plug-in transformer.

Dimming: Joshua J-box and Meg J-box are dimmable with a standard incandescent dimmer.

Finish: Chrome, gold, black.

Lamping: Low-voltage 12 volt Halogen MR16 up to 50 watts or less. (UV-protected 50 watt 38o MR16 included with Joshua, 20 watt 36o MR16 lamp included with Meg.)

Accessory: Lil Wok accessory with Snap Louver Lens Holder included. Diffusor or Spread Lens available separately.

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Lil Wok Accessory 700LMPCO

Each Meg or Joshua picture light includes a matching Lil Wok accessory, lens holder clip, and UV-protected MR16. Additional accessories may be ordered.

3" x 1.6"
Decorative metal shade reduces backlight from MR16. Includes Snap Louver Lens Holder. Holds a single lens or louver.

Color: Antique bronze, black, copper, silver.

Lamp: Black, gold, silver: Low-voltage MR16 lamp up to 50 watts (not included). Antique bronze, copper: Low-voltage MR16 up to 20 watts (not included).

House of Troy Advent-Gemini AG Series Picture Light

House of Troy Advent-Gemini Picture Lights AG Series

Bulbs: 50 Watt MR16 Bulb included

Finishes: Black, Satin Nickel, Satin Brass

• UV filtered 50 Watt Halogen bulb included
• Shade and arm adjust for maximum illumination
• Installation hardware included
• Transformer included
• Easy Installation
• Life-Time Guarantee

Lengths: 6", 11", 16", 21", 30", 40"

Finishes: Satin Brass, Black, Satin Nickel

CP1 Clamp-On Display Fixture, shown with Mesh Backlight Shield Accessory, sold separately

Tech Lighting CP Display Fixtures

CP1 Clamp-On Light

Light weight and versatile, CP1 features a universal clamp that provides a secure grip on any surface shape-from 1/2" pipe to 4" wall. Arms telescope from 9" to 25", and angle up and down 180o; the lamp rotates 330o and the CP1 holds steady however it"s positioned. It automatically shuts itself off then turns on again when short is corrected.

Finish: Chrome arms; black or white clamp.

Installation: 10 foot cord and plug with 50 watt or 75 watt 12 volt transformer (included). No tools necessary to install or to replace lamp. Lamp: CP1 with 50 watt transformer: low-voltage Halogen MR16 lamp up to 50 watts (not included). CP1 with 75 watt transformer: low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

CP Screw On Display Fixture, shown with Mesh Backlight Shield Accessory, sold separately

Tech Lighting CP Display Fixtures

CP Screw On

Designed with special screw-on bracket to fit lightweight portable booths. Arms telescope from 9" to 25", and angle up and down 180o; the lamp rotates 330o and the CP1 holds steady however it’s positioned. It automatically shuts itself off then turns on again when short is corrected.

Installation: Leave two screws in or on top of the wall for quick mounting of the keyhole bracket. Complete with 12 volt 50 or 75 watt plug-in transformer and 10’ cord, plugs into a standard outlet.

Finish: Chrome arms; chrome or black bracket.

Lamp: CP Screw-On with 50 watt transformer: low-voltage, Halogen MR16 lamp up to 50 watts (not included). CP Screw-On with 75 watt transformer: low-voltage, Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Lite Clamp Fixtures

LC-Archie Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. 17.5" long, 10" height of arch. Pivots at head to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The length of the fixture may be adjusted by sliding the arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10’ cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens.

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Lite Clamp Fixtures

LC-Georgi Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. Extends up to 17.5" from clamp, 3" height of arc. Use coated handle to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The length of the fixture may be adjusted by sliding the arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10" cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp.

Lamping: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Lite Clamp Fixtures

LC-Wally Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. Available in 12" and 24" arm lengths. Use coated handle to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The length of the fixture may be adjusted by sliding the fixture arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10" cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

XPL-4-XX 4-Bulb Unit

Polished Brass, Bronze, Chrome and Black

NSL National Specialty Lighting Xenon Picture Light Units

Self-contained Task Light Fixture in four fixture sizes from 6.5" to 30" and four Finishes: Polished Brass, Bronze, Chrome and Black.

No harmful UVs, cooler than halogen, brighter than fluorescent, four times the bulb life, greater light output, solid brass design and construction. The new benchmark in picture lighting.

Each Xenon Picture Light ships with bulb(s), transformer(s) and 8' interconnecting cord. Additional 8' extension cords are listed below.

Applications

• Picture illumination
• Wall illumination
• Podium light
• Display cases
• Indirect accent light

NSL Xenon Picture Lights >

Tech Lighting Display Jack Fixtures

DJ-Archie

17.5" long, with a 10" swooping curve. Pivots at head to direct the beam. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Archie’s arm’s into the canopy or ports. After the show, pull out DJ-Archie—the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Display Jack Fixtures

DJ-Georgi

18" long with a 3" high gentle curve. Pivots at head to direct beam. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Georgi’s arm’s into the canopy or ports. After the show, pull out DJ-Georgi—the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Display Jack Fixtures

DJ-Telescope

Telescopes from 9" to 25" from mounting point and pivots 180o at base of element. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Telescopes arm’s into the canopy or ports. After the show, pull out DJ-Telescope— the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold seperately).

Required Usage: Any DisplayJack mounting option (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Display Jack Fixtures

DJ-Wally Lite

12" or 24" long and field-cuttable. Pivots at head to direct beam. Field-cuttable. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Wally Lite’s arm’s into the canopy or ports. After the show, pull out DJ-Wally—the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold seperately).

Required Usage: Any DisplayJack mounting option (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting DisplayJack 2" Square Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 2" square canopy and push the DisplayJack element’s arms into the canopy. After the show, pull the DisplayJack element out—the canopy stays in place for next time with no need for an electrician.

Installation: Mounts to Tech Lighting’s special 2" square, 6" deep junction box (included). 12 volt, 75 watt electronic transformer (included) fits inside junction box.

Finish: Chrome or black.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack 4" Round Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 4" round canopy and push the DisplayJack element’s arms into the canopy. After the show, pull the DisplayJack element out—the canopy stays in place for next time with no need for an electrician.

Installation: This product can mount to either a 4" electrical box with plaster ring or an octagon electrical box (not included). 12 volt, 75 watt electronic transformer (included) fits inside junction box. For ceiling or wall.

Finish: Chrome or black.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack 4" Round Swivel Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 4" round swivel canopy and push the DisplayJack element’s arms into the canopy. After the show, pull the DisplayJack element out—the canopy stays in place for next time with no need for an electrician. Fixture pivots up and down at canopy.

Installation: This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). 12 volt, 75 watt electronic transformer (included) fits inside junction box. For ceiling or wall.

Required Usage: Any DisplayJack element (sold separately).

Finish: Chrome or black.

Tech Lighting DisplayJack Connector Ports

DESCRIPTION DisplayJack provides an easy lighting solution for exhibit booths and displays. Install these receptacle ports and push the DisplayJack element’s arms into them. After the show, pull the DisplayJack element out—the ports stay in place for next time with no need for an electrician.

Installation: Install these two receptacle ports through panel up to 4" thick. Access to back of panel required. 12 volt, 75 watt plug-in transformer with 10’ cord plugs into a standard outlet.

Finish: Chrome only.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack Screw-On

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install this special screw-on bracket designed to fit lightweight portable booths and push the DisplayJack element’s arms into it. After the show, pull the DisplayJack element out—leave the two screws in or on top of wall for quick mounting of the keyhole bracket.

Installation: Leave two screws in or on top of the wall for quick mounting of the keyhole bracket. Complete with 12 volt, 75 watt plug-in transformer and 10’ cord, plugs into a standard outlet.

Finish: Chrome only.

Required Usage: Any DisplayJack element (sold separately).

Zaneen Raya Picture Light D9-5004 $238.40

Finish: Brushed Plated finishes

Maximum Wattage: 2 x 20W BI PIN T4 90W 12V GY6.35
Dimensions: D 12" x Ht. 12 3/4" x Ext. 7"

Bruck Lighting Systems Stik Display Element

131200 matte chrome $236.80

The Bruck Stik Display Element has an adjustable stem length that can extend to 36". It is equipped with a tightening clip that makes it ideal for displaying artwork.

A variety of Bruck uni-light fixtures can be used as the fixture head.

The STIK fixture is not compatible with any other Bruck track lighting system.

70 watt max MR16, not included

Shipping Weight (for freight estimate only)
2 lbs. 5.6oz

Bruck Lighting Tivo Display Light with clamp mount

Tivo Display Light with clamp mount for boards of a thickness of 3/4" - 2", plug-in transformer included.

131250 stainless steel, black

WAC Surface Mounted Low Voltage Flexible Light MM-204, shown with MBS16 Mesh Bulb Shield, not included. Snaps over an MR11 or MR16 bulb and diffuses glare from the back of the bulb.

WAC Surface Mounted Low Voltage Flexible Light MM-204

MM-204-BK $34.00 ($29.00 with minimum order)
MM-204-BN $40.00 ($34.00 with minimum order)
MM-204-WT $34.00 ($29.00 with minimum order)

Flexible fixtures provide ease of aiming. The "MI" and "MM" mini canopies use remote transformers and are widely used for display work. MM-204 requires behind the surface access. Display fixture requires rear access for mounting. Ideal for trade show booth lighting.

Socket: Bi-pin ceramic with 18 gauge Teflon insulated wires, sleeves.

Transformer: Requires a remote transformer (not supplied).

Mount on:

• wall
• ceiling
• shelving
• in cabinets
• above work stations

BK-Black, BN-Brushed Nickel, WT-White
Lamp MR11, MR16 (not included)
Wattage 50w Max

WAC Display & Picture Lights >

Material: Steel
Listing: UL, CUL Listed.

Lamping: Re-lamps from the front. Accepts MR16 or MR11 protective glass covered lamps. An accessory lens can be used with a standard, uncovered MR16G lamp (lens clip must be used, specify LENS-16-CLIP).

Remote transformer required (sold separately).

Options / Accessories

Lens Options: Colored, Colored Dichroic, Ultra Violet, Beam Elongating, and Spread lenses, Honey Comb Louver to be used with a Lens Clip and a protective glass covered MR16G lamp. Specify LENS-16 CLIP (only available in the MR16 size)

Mesh and solid bulb shields are available for both MR16 and MR11 sizes, but cannot be used in conjunction with a lens clip.

Shades, Shields, Lenses & Accessories
WAC Transformers

Joshua 2" Canopy shown with Backlight Shield Accessory, not included

Tech Lighting Joshua

Joshua 2" Canopy 700JS2C

Joshua pivots left to right and the lamp rotates 330o. Custom lengths and bends available.

Installation: 2" square flush canopy mounts to Tech Lighting"s special 2" square, 6" junction box (included). Electronic transformer fits inside junction box. For ceiling only.

Dimming: May be dimmed with a standard incandescent dimmer (not included).

Finish: Chrome or black canopy with chrome arms.

Lamp: 3": low-voltage Halogen 12 volt MR16 lamp up to 50 watts (not included). Other lengths: low-voltage Halogen 12 volt MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >

Tech Lighting Joshua

Joshua 4" Round Flush Canopy 700JSC

Joshua pivots left to right and the lamp rotates 330o. Custom lengths and bends available. 3" to 24" versions for wall or ceiling mount, 36" to 72" versions for ceiling only.

Installation: 4" round flush canopy can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). Electronic transformer fits inside junction box. For wall or ceiling.

Dimming: May be dimmed with a standard incandescent dimmer (not included).

Finish: Chrome, black, or white canopy with chrome arms.

Lamping: 3": low-voltage Halogen 12 volt MR16 lamp up to 50 watts (not included). Other lengths: low-voltage Halogen 12 volt MR16 up to 75 watts (not included). See accessory for maximum wattage usage.

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display & Exhibit (Picture Lighting) Collection >