Belladonna Accessory

700BELL
4.5" x 2.5"
Large belled metal shade with plated Finish: . Includes Eggcrate Louver.

Color: Antique bronze, chrome, copper, Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

 Torpedo Pendant with chrome Belladonna Accessory

 Torpedo with Satin Nickel Belladonna Accessory

Cone Glass Shield

Color: Amber, cobalt, frost, green, rose.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Aero with Cone Glass Shield Accessory.

700MOPIV with Cone Glass Shield Accessory 700LICO

Dichroic Glass Shield

Torpedo Pendant with Dichroic Glass Shield Accessory

700DCH
3.4" x 2.8"
Iridescent spectrum of glass. Includes Snap Louver Lens Holder. Can hold a single lens or louver.

Finish: Antique bronze, black, chrome, satin nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Firebird Glass Shield

700FIRA
1.7" x 2.7"
Patterned Murano glass. Can hold a single lens or louver. Includes Snap Louver Lens Holder.

Color: Owl (amber), peacock (blue), swan (white).

Finish: Antique bronze, chrome, Satin Nickel. lamp Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Flight Paper

700FP_
MR11 7" x 3.3"
MR16 9.3" x 4.3"
Decorative shade of heat-resistant paper to wrap around MR16 or MR11 lamp .

Color: White only.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included). Low-voltage MR11 lamp up to 35 watts (not included).

K-Twist & Shout includes Flight Paper. Can wrap around MR16 or MR11 lamp .

Gobo Holder

700AC156
2.5" x 6.5"
Add this gobo holder and a gobo template (sold separately) to the T156 and project a pattern or logo onto any surface. Includes MR16 Snout. See the chart on the following page for the projected image size.

Finish: Chrome, Satin Nickel.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (12-15o lamp recommended, not included).

More information on Gobo Holder
700AC156 ________
Special T156 Accessory
PDF will open in a new window

Usage: Use with T156 head and a gobo (required, sold separately). The gobo holder accepts a glass or metal gobo with an outside Width of 54 mm. The image itself must have an overall Width not to exceed 27 mm. Contact Tech Lighting customer service for gobo ordering information.

ACCESSORIES An additional Gobo Magnifying Lens (sold separately, shown below) may be added to increase image size.

Gobo Templates

Here is just a sample of some standard patterns. Contact us for additional information on standard and custom gobos.

700MAGGL
Add this optional lens to the gobo holder accessory to increase the size of the projected image. See the chart for the projected image size .
PDF will open in a new window

Finish: Chrome, Satin Nickel.

lamp Low-voltage Halogen MR16 lamp up to 75 watts (not included).

Usage: Use with T156 head and a gobo holder (required, sold separately).

Gobos are used with the T156 head with the addition of a gobo holder. For best appearance gobos should be projected on a white surface, away from direct sunlight. Gobo may be glass or metal and must have an outside Width of 54mm. The overall size of the image should not exceed 21mm in width. For simple patterns, use a metal gobo. For multiColor: ed or intricate patterns, use a glass gobo.

Lamp: We recommend a low-voltage 75 watt, 12-15o lamp (not included).

Iron Wrap for Mini-Ovation & Ovation

Small: 700FJMOV
Large: 700FJMOVL

Finish: Black Iron, Satin Nickel or Antique Bronze

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Firebird Glass Shield

700FIRA
1.7" x 2.7"
Patterned Murano glass. Can hold a single lens or louver. Includes Snap Louver Lens Holder.

Color: Owl (amber), peacock (blue), swan (white).

Finish: Antique bronze, chrome, Satin Nickel. lamp Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Lil Egypt

700LEGY_
2.8" x 2.3"
Finely handcrafted beaded shade accessory reduces backlight from MR16. Includes Snap Louver Lens Holder. Holds a single lens or louver.

Color: Amber, cobalt, dark amber, frost, red.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Torpedo with Lil Egypt Accessory

Lil Wok

K-Johnny 12 with Lil Wok Accessory, not included.

700LMPCO_
3" x 1.6"
Decorative metal shade reduces backlight from MR16. Includes Snap Louver Lens Holder. Holds a single lens or louver.

Color: Antique bronze, black, silver

Lamp: Black, silver: Low-voltage MR16 lamp up to 50 watts (not included). Antique bronze: Low-voltage MR16 up to 20 watts (not included).

Martini Glass Shield

Torpedo Pendant with Martini Glass Shield Accessory

700MRT
5.3" x 3"
Layers of brilliant glass. Snap Louver Lens Holder included. Can hold a single lens or louver.

Color: Amber frit, multiColor: frit, purple frit, white frit.

Finish: Antique bronze, chrome, Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Meteorite

700MET
3" x 2"
Dome-shaped case glass or clear. Includes Snap Louver Lens Holder, which can hold a single lens or louver (for use with MR16) and spring clip and Pyrex glass shield (for use with bi-pin lamp).

Color: Amber, clear, cobalt, frost, red.

Finish: Antique bronze, chrome, Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts or low-voltage bi-pin lamp up to 50 watts (not included).

Aero with Meteorite Accessory

Torpedo Pendant with Meteorite Accessory

Mini Om Accessory

700MR16OM
Metal and translucent glass, onyx or Color: ed glass backlight shield. Can hold a single lens or louver.

Color: Amber, Amber Frost, Clear, Frost, Onyx and Solid Metal.

Finish: Antique bronze and Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Mini Om (sold separately).

Prism Glass Shield

700PRISM
3.3" x 2.5"
Backlight shield of ribbed glass. Includes Snap Louver Lens Holder, which can hold a single lens or louver.

Color: Amber, clear.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Aero with Prism Glass Shield Accessory.

Torpedo Pendant with Tinkerbell Accessory

Round Glass Shield

700MR16G
1.9" x 2.3"
Backlight shield of Color: ful translucent glass. Includes Louver Lens Holder. Can hold up to two lenses or louvers.

Color: Amber, cobalt, frost, green.

Finish: Aluminum, antique bronze.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Aero with Round Glass Shield Accessory

K-Bye-Bye with Round Glass Shield Accessory

Usage: Available for use on Aero, CP1, Curly Torpedo, Joshua Ceiling, K-Bye-Bye, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, MO-Pivot, Swivel, Tele, Tilt, Torpedo, Torpedo Pendant (sold separately).

Scavo Glass Shades

700SCAVO
Curve shaped scavo glass Finish: provides old world charm. Includes Snap Louver Lens Holder. Can hold a single lens or louver.

Color: Amber, amethyst, frost, green.

Finish: Antique bronze, chrome, Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Soda Glass Shades

700SDA
Cone shaped glass shade infused with bubbles. Includes Snap Louver Lens Holder. Can hold a single lens or louver.

Color: Amber, blue, frost.

Finish: Antique bronze, chrome, Satin Nickel. lamp Low-voltage MR16 lamp up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Sugar Accessory Shades

700SUG
Streams of glass piping formed into a cupped shape. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to 50 watts.

Color: Amber, aqua, violet, red, white.

Finish: Antique bronze, chrome, Satin Nickel.

Lamp: Low-voltage MR16 of up to 50 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Spy

Sprocket with Spy Accessory

700SPSPY
4" x 4.5"
Decorative solid frost glass diffusing disk.

Color: Frost only.

Finish: Antique bronze, chrome or Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 75 watts (not included).

Usage: Use with Sprocket head only.

Taza

Aero Light Element with Taza Accessory

Taza Accessory 700TAZA

Cone glass accessory with intensely twisted rich color. Includes Snap Louver Lens Holder. Can hold one lens or louver. Low-voltage MR16 lamp of up to 50 watts (not included).

Available for use on Aero, CP1, Curly Torpedo, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Helios, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, MO-Pivot, Swivel, Tele, Tilt, Torpedo Pendant, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite (sold separately).

Tinkerbell

700TNKBELL_
2.5" x 1.8"
Small belled metal shade with plated or painted Finish: . Includes Snap Louver Lens Holder, which can hold a single lens or louver.

Color: Antique bronze, black, chrome, chrome mesh, Satin Nickel.

Lamp: Low-voltage MR16 lamp up to 35 watts (not included).

Usage: Available for use on Aero, Curly Torpedo, Tilt, Torpedo, Torpedo Pendant (sold separately).

Aero with Tinkerbell Accessory

Curly Torpedo with Tinkerbell Accessory

Torpedo Pendant with Tinkerbell Accessory

Aero with Mesh Tinkerbell Accessory

Wood Handle Accessory

700AERWOOD
0.4" x 3"
Decorative handle tipped with wood has screw base to fit Aero and Sprocket handle holes.

TYPE Walnut or stainable bare.

Finish: Antique bronze, chrome or Satin Nickel stem.

Finish: Use with Aero or Sprocket head only.

Swag Hook

700FJSWG
Low-Voltage Swag Hook
Chrome, Satin Nickel, Antique Bronze

700TDSWG
Swag Hook
Chrome, Satin Nickel, Antique Bronze, White

Optical Controls

Eggcrate Louver

Diffuser, Spread & Soft Focus Lens

UV Filters

700 A02- or 700 A03-
Honeycomb louver cuts glare from front of lamp . Aluminum only. Requires lens holders.

MR11 1.6" x .1"
MR16/PAR16 2.0" x .1"
PAR20 2.5" x .1"
PAR30 3.8" x .1"
PAR36 4.0" x .1"
PAR38 4.8" x .1"

140_
Diffuser lenses soften the edge of the beam; linear spread lenses elongate it. Soft focus lenses reduce glare.

MR11 1.4" x .1"
MR16/PAR16 2.0" x .1"
PAR20 2.5" x .1"
PAR30 3.8" x .1"
PAR38 4.8" x .1"

140UV_
UV filter effectively blocks UV radiation while transmitting
high quality visible light.

MR11 1.4" x .1"
MR16/PAR16 2.0" x .1"
PAR20 2.5" x .1"
PAR30 3.8" x .1"
PAR38 4.8" x .1"

Color: ed & Dichroic Lenses

Louver Lens Holder

Snap Louver Lens Holder

140_
Glass lenses wash the light with the chosen Color: ; dichroic lenses filter out the unwanted wave Lengths for a purer Color: effect.

Color: Blue, green, red, yellow.

Lamp: (not included) Low-voltage MR16 lamp up to 75 watts.

MR11 1.4" x .1"
MR16/PAR16 2.0" x .1"
PAR20 2.5" x .1"
PAR30 3.8" x .1"
PAR38 4.8" x .1"

700A01_
Two-piece holder secures to front of lamp to hold lenses or louvers. MR16 holds up to two lenses or louvers. MR11 can hold a single lens or louver.

Color: Aluminum, antique bronze, black.

Lamp: Low-voltage MR16 lamp up to 75 watts (not included). Low-voltage MR11 lamp up to 35 watts (not included).

MR11 1.5" x .5"
MR16 2.3" x .5"

700A06-CH
2" x 2"
Ring snaps on front of MR16 lamp to hold a single lens or louver; bendable tabs secure it in place.

Color: Aluminum only.

Lamp: Low-voltage MR16 lamp up to 75 watts (not included).

Usage: Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite (sold separately).

MR16 Snout

700SNOUT
2" x 1"
Prevents glare from MR16 lamp . Requires Louver Lens Holder.

Finish: Aluminum, black.

lamp Low-voltage MR16 lamp up to 75 watts (not included).

Usage: Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Bye-Bye, K-Giro, K-Hello, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Arhie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, T156, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite (sold separately).

PAR Louver Lens Holder

700PARLL
Secures to front of Tweak head and holds up to two lenses or louvers (sold separately).

Color: None.

Finish: Satin Nickel, white.

System: Available for Power Jack and T~trak™.

Sportster Louver Lens Holder

700SSLLH
Secures to front of line-voltage Sportster head (sold separately) and holds up to two lenses or louvers (sold separately).

Color: None.

Finish: Satin Nickel, white.

System: Available for Power Jack and T~trak™.

Barndoors

700A08-BK
7" x 7"
Secures to front of MR16 lamp to control light. Includes Louver Lens Holder. Can hold up to two lenses or louvers.

Color: Black only

Lamp: Low-voltage MR16 lamp up to 75 watts (not included).