Tech Lighting Display & Exhibit (Picture Lighting) Collection

CP1 Clamp-On Display Fixture, shown with Mesh Backlight Shield Accessory, sold separately

Tech Lighting CP Display Fixtures

CP1 Clamp-On Light

Light weight and versatile, CP1 features a universal clamp that provides a secure grip on any surface shape-from 1/2" pipe to 4" wall. Arms telescope from 9" to 25", and angle up and down 180o; the lamp rotates 330o and the CP1 holds steady however it"s positioned. It automatically shuts itself off then turns on again when short is corrected.

Finish: Chrome arms; black or white clamp.

Installation: 10 foot cord and plug with 50 watt or 75 watt 12 volt transformer (included). No tools necessary to install or to replace lamp. Lamp: CP1 with 50 watt transformer: low-voltage Halogen MR16 lamp up to 50 watts (not included). CP1 with 75 watt transformer: low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Lite Clamp Fixtures

LC-Archie Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. 17.5" long, 10" Height of arch. Pivots at head to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The Length of the fixture may be adjusted by sliding the arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10' cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens.

Tech Lighting Lite Clamp Fixtures

LC-Georgi Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. Extends up to 17.5" from clamp, 3" Height of arc. Use coated handle to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The Length of the fixture may be adjusted by sliding the arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10" cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp.

Lamping: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Lite Clamp Fixtures

LC-Wally Lite

Sleek, lightweight Lite Clamp fixtures were specially designed for banner frames and portable booths. Available in 12" and 24" arm Lengths. Use coated handle to direct the beam.

Installation: The round clamp grips securely to a panel as slim as 1/4" or as thick as 1". The banner channel allows a tight hold to 5/16" banner frames. The Length of the fixture may be adjusted by sliding the fixture arms back and forth through the clamp. Includes 12 volt, 75 watt plug-in transformer on a 10" cord to plug into a standard outlet. Cord disconnects from fixture for easy repacking.

Finish: Chrome arms with black clamp.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Display Jack Fixtures

DJ-Archie

17.5" long, with a 10" swooping curve. Pivots at head to direct the beam. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Archie's arm's into the canopy or ports. After the show, pull out DJ-Archie-the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting Display Jack Fixtures

DJ-Georgi

18" long with a 3" high gentle curve. Pivots at head to direct beam. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Georgi's arm's into the canopy or ports. After the show, pull out DJ-Georgi-the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only. Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting Display Jack Fixtures

DJ-Telescope

Telescopes from 9" to 25" from mounting point and pivots 180o at base of element. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Telescopes arm's into the canopy or ports. After the show, pull out DJ-Telescope- the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold seperately).

Required Usage: Any DisplayJack mounting option (sold separately).

Tech Lighting Display Jack Fixtures

DJ-Wally Lite

12" or 24" long and field-cuttable. Pivots at head to direct beam. Field-cuttable. DisplayJack elements provide an easy lighting solution for exhibit booths and displays.

Installation: Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Wally Lite's arm's into the canopy or ports. After the show, pull out DJ-Wally-the canopy or ports stay in place for next time with no need for an electrician.

Finish: Chrome only.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessory: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold seperately).

Required Usage: Any DisplayJack mounting option (sold separately).

Tech Lighting DisplayJack 2" Square Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 2" square canopy and push the DisplayJack element's arms into the canopy. After the show, pull the DisplayJack element out-the canopy stays in place for next time with no need for an electrician.

Installation: Mounts to Tech Lighting's special 2" square, 6" deep junction box (included). 12 volt, 75 watt electronic transformer (included) fits inside junction box.

Finish: Chrome or black.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack 4" Round Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 4" round canopy and push the DisplayJack element's arms into the canopy. After the show, pull the DisplayJack element out-the canopy stays in place for next time with no need for an electrician.

Installation: This product can mount to either a 4" electrical box with plaster ring or an octagon electrical box (not included). 12 volt, 75 watt electronic transformer (included) fits inside junction box. For ceiling or wall.

Finish: Chrome or black.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack 4" Round Swivel Canopy

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install 4" round swivel canopy and push the DisplayJack element's arms into the canopy. After the show, pull the DisplayJack element out-the canopy stays in place for next time with no need for an electrician. Fixture pivots up and down at canopy.

Installation: This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). 12 volt, 75 watt electronic transformer (included) fits inside junction box. For ceiling or wall.

Required Usage: Any DisplayJack element (sold separately).

Finish: Chrome or black.

Tech Lighting DisplayJack Connector Ports

DESCRIPTION DisplayJack provides an easy lighting solution for exhibit booths and displays. Install these receptacle ports and push the DisplayJack element's arms into them. After the show, pull the DisplayJack element out-the ports stay in place for next time with no need for an electrician.

Installation: Install these two receptacle ports through panel up to 4" thick. Access to back of panel required. 12 volt, 75 watt plug-in transformer with 10' cord plugs into a standard outlet.

Finish: Chrome only.

Required Usage: Any DisplayJack element (sold separately).

Tech Lighting DisplayJack Screw-On

DisplayJack provides an easy lighting solution for exhibit booths and displays. Install this special screw-on bracket designed to fit lightweight portable booths and push the DisplayJack element's arms into it. After the show, pull the DisplayJack element out-leave the two screws in or on top of wall for quick mounting of the keyhole bracket.

Installation: Leave two screws in or on top of the wall for quick mounting of the keyhole bracket. Complete with 12 volt, 75 watt plug-in transformer and 10' cord, plugs into a standard outlet.

Finish: Chrome only.

Required Usage: Any DisplayJack element (sold separately).

4" Round Canopy shown with Metal Man Point, not included

Tech Lighting Kable Lite Monopoint Canopies

Kable Lite 4" Round Canopy 700KC4R

Install the Kable Lite 4" Round Canopy to the wall or ceiling, then attach a Kable Lite head to create your own fixture or sconce. Two 24" long, field-cuttable and bendable wire leads. Kable Lite elements sold separately.

Installation: 4" round flush canopy can mount to either a 4" electrical box with round plaster ring or an octagon electrical box. (not included). 12 volt, 75 watt electronic transformer (included) fits inside junction box.

Dimming: May be dimmed with a standard incandescent dimmer (not included).

Finish: Chrome, Satin Nickel.

Required Usage: Any Kable Lite head (sold separately).

Joshua 2" Canopy shown with Backlight Shield Accessory, not included

Tech Lighting Joshua

Joshua 2" Canopy 700JS2C

Joshua pivots left to right and the lamp rotates 330o. Custom Lengths and bends available.

Installation: 2" square flush canopy mounts to Tech Lighting"s special 2" square, 6" junction box (included). Electronic transformer fits inside junction box. For ceiling only.

Dimming: May be dimmed with a standard incandescent dimmer (not included).

Finish: Chrome or black canopy with chrome arms.

Lamp: 3": low-voltage Halogen 12 volt MR16 lamp up to 50 watts (not included). Other Lengths: low-voltage Halogen 12 volt MR16 lamp up to 75 watts (not included). See accessory for maximum wattage usage.

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Joshua

Joshua 4" Round Flush Canopy 700JSC

Joshua pivots left to right and the lamp rotates 330o. Custom Lengths and bends available. 3" to 24" versions for wall or ceiling mount, 36" to 72" versions for ceiling only.

Installation: 4" round flush canopy can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). Electronic transformer fits inside junction box. For wall or ceiling.

Dimming: May be dimmed with a standard incandescent dimmer (not included).

Finish: Chrome, black, or white canopy with chrome arms.

Lamping: 3": low-voltage Halogen 12 volt MR16 lamp up to 50 watts (not included). Other Lengths: low-voltage Halogen 12 volt MR16 up to 75 watts (not included). See accessory for maximum wattage usage.

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Lil Wonder 700F2

Just 4" tall, Lil Wonder goes anywhere! The canopy can screw onto a wall or sit on the floor. Automatic shut off if tipped over. Head pivots to direct beam. Includes 12 volt plug-in transformer.

Finish: Black, white, Satin Nickel.

Lamping: Low-voltage Halogen 35 watt MR11 lamp included.

Tech Lighting Lil Big Wonder 700F1

A compact, powerful accent lamp with 12 volt plug-in transformer, 4.75" tall. The canopy can screw onto a wall or sit on the floor. Automatic shut off if tipped over. Head pivots to direct beam.

Finish: Black, white, Satin Nickel.

Lamp: Low-voltage Halogen 50 watt MR16 lamp included.

Tech Lighting Joshua and Meg Picture Lights

These elegant, unobtrusive picture lights are designed to properly illuminate artwork without glare. Mounting bracket is grooved to hold picture hanging wire securely. Maximum weight of picture 50 lbs. By changing lamps or adding a lens, Joshua can light an area as small as four inches square or as large as four feet square, and Meg can light an area as small as eight inches square or as large as two feet square. See chart below. J-Box mount version mounts to any standard juction box. Plug-in version has 10' cord with plug-in transformer.

Dimming: Joshua J-box and Meg J-box are dimmable with a standard incandescent dimmer.

Finish: Chrome, gold, black.

Lamping: Low-voltage 12 volt Halogen MR16 up to 50 watts or less. (UV-protected 50 watt 38o MR16 included with Joshua, 20 watt 36o MR16 lamp included with Meg.)

Accessory: Lil Wok accessory with Snap Louver Lens Holder included. Diffusor or Spread Lens available separately.

Lil Wok Accessory 700LMPCO

Each Meg or Joshua picture light includes a matching Lil Wok accessory, lens holder clip, and UV-protected MR16. Additional accessories may be ordered.

3" x 1.6"
Decorative metal shade reduces backlight from MR16. Includes Snap Louver Lens Holder. Holds a single lens or louver.

Color: Antique bronze, black, copper, silver.

Lamp: Black, gold, silver: Low-voltage MR16 lamp up to 50 watts (not included). Antique bronze, copper: Low-voltage MR16 up to 20 watts (not included).