Tech Lighting Kable Lite with K-Hello Head Elements and K-Bye-Bye Head Elements with Amber Round Glass Shield Accessories

K-Bye-Bye shown with Round Glass Shield Accessory.

Tech Lighting K-Bye-Bye Head 700KBYENC

Kable Lite from $136.00

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

K-Giro shown with Mesh Backlight Shield Accessory

Tech Lighting K-Giro 700KGIR

Kable Lite from $100.00

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

Tech Lighting Kable Lite with K-Hello Head Elements and K-Bye-Bye Head Elements with Amber Round Glass Shield Accessories

Tech Lighting K-Hello 700KHELLO

Kable Lite from $100.00

Highly adjustable head tilts between cables and rotates 140° within its ring. Integral louver lens holder can hold glass lens (sold separately) or eggcrate louver (included). Satin aluminum finish. Specify low-voltage, MR16 lamp of up to 50 watts or AR111 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only
Cable Separation: 3", 5" or 6"

Tech Lighting K-Jane 700KJAN

Kable Lite from $68.00

K-Jane drops below the cables; head pivots 220° on two axes. For cable separations of up to twice the length. Field-cuttable. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12" or 24"

Tech Lighting K-Johnny 700KJOH

Kable Lite from $48.00

Versatile, field-cuttable, with a pivoting head to direct the beam. low voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only. System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12", 18", 24", 48", 144"

Tech Lighting K-Pivot 700KPIV

Kable Lite from $60.00

Head swivels 220°, 2" to 8" versions pivot on horizontal axis, 1" version pivots on vertical axis only. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Cable Separation: 1", 2", 3.5", 5.5", 8"

K-Telescope shown with Mesh Backlight Shield Accessory

Tech Lighting K-Telescope 700KTEL16

Kable Lite from $104.00

Arms telescope individually from 12" to 42", creating unlimited angles. For cable separations of 1" to 48". Head rotates 330° and has swivel and pivot action to direct the beam. Low-voltage, MR16 lamp of up to 75 watts, (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum

Kable Lite with Biz Pendants

Tech Lighting Kable Lite Pendants

Pendants suspended from Tech Lighting Kable Lite or MonoRail are an ideal way to light an island or counter. There are 41 different Pendant options available for Tech Lighting Kable Lite System.

Tech Lighting Low Voltage Pendants >

Kable Lite FreeJack Connector 700KABCO

For cable separations of 8" or less. May be field cut to desired separation (2" minimum).

Installation: For cable separations of 8" or less. May be field-cut to desired separation (2" minimum). FreeJack male connector fits into bottom; twist to tighten.

OTHER INFORMATION For use with most FreeJack pendants or heads (sold separately). Note: Kable Lite FreeJack Connectors are included with all K-prefixed FreeJack pendants and heads; order additional if required by layout.

Kable Lite Pendant or Light Element Adapters 700PRTD11

Element adapters allow Kable Lite elements to be mounted parallel to cables.

Kable Lite Adjustable Standoff 700PRTD3

Suspension cable virtually disappears for a clean and elegant look. Wire grip allows easy adjustability. Standard with twelve feet of field-cuttable suspension cable; may also be specified with thirty feet of cable. Horizontal rod is 12" wide; field cut to desired cable separation (3.5" minimum).

OTHER INFORMATION Mounts to ceiling to support a long Kable Lite run or a Kable Lite run with heavy elements, such as glass pendants.

Kable Lite Horizontal Turn 700PRTC6

Directional hardware for making a floating horizontal turn when the ceiling is inaccessible. Includes six feet of field-cuttable cable to provide tension for turn.

Kable Lite Wall Turn 700KWSO01

A wall turn attaches to a surface to make simple turns. Includes insulating tubing to cover where cables cross. Pair.

Kable Lite Vertical Turn 700PRTC8

Directional hardware for making a floating vertical turn when the ceiling is inaccessible. Includes six feet of field-cuttable cable to provide tension for turn.

Kable Lite Rigid T Standoff 700KTSO

Mounts to ceiling. Provides support for long runs or runs with a changing cable drop. Offered for a range of drops and cable separations. Not fieldcuttable. To run the system just beneath a surface transformer, use the 5" drop.

How do I design my own Kable Lite System?

ELEMENTS (Pendants, Heads, and Functional Art):

1. Choose elements
   Check cable separation requirements. Cable separation is usually 1", 2", 3.5", 5.5", or 8". 5.5" separation has most element options.
2. Choose Accessories and Optical Controls, if required or desired.
3. Choose lamps, 12 or 24 volt, that do not exceed maximum wattage of element or accessory
4. Add up total lamp wattage on system
5. Choose finish of system and make sure all components are specified as such.
6. Use scaled drawing as a reference.
7. Identify mounting locations for turnbuckles and any turns in the run.
8. Measure Length of Kable Lite run; determine distance in feet.
9. Order two times the Length of run plus 10 percent.
10. Choose turnbuckles to tighten cable.

Select Either

Remote Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed
Specify a Power Feed Canopy, single or dual-feed.

OR

Surface Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed

*Wattage of the transformer must meet or exceed wattage of lamps.

If powering system with more than one transformer, add Isolating Connectors to isolate the feeds from each other.

Mounting:
Determine how far below ceiling the system will drop. If using a Surface Transformer drop must exceed Height of transformer.

If mounting turnbuckles to ceiling and dropping the system a greater distance below ceiling choose either Rigid T Standoff or Rigid Post Standoff to mount before turnbuckles. Determine part number.

If cables will be making a turn off the wall specify either
Horizontal Turn or Wall Turn and determine part number.

If cables will be making a turn off the ceiling specify
Rigid Post Standoff Turn. Determine part number

If using heavier elements, such as glass pendants, or if a span of cable exceeds 20' without support, specify Adjustable Standoffs.

This outline covers only the most common Kable Lite applications, but
Kable Lite is very versatile. For other Kable Lite system options, call us at 954-456-1006.