WAC Lighting 3" Low Voltage Recessed Downlighting

HR-LED321-WT/WT

WAC LEDme Downlight HR-LED321 Round, Baffle

• Full scale dimming to 1%
• Light level for 3000K, 41 foot candles at 5 feet, 16 foot candles at 8 feet
• Narrow flood beam spread and 40° visual cutoff
• Replaceable LED Module
• 50,000 hour potential life
• Less than 1/8" thick, super low profile die-cast aluminum trim

Finish BK/BN - Black/Brushed Nickel, BK/WT-Black/White, WT/WT-White/White

Above: HR-LED321-CH
Below: HR-LED321-WT

WAC LEDme Downlight HR-LED331 Round, Baffle

• Full scale dimming to 1%
• Suitable for wet locations
• Light level for 3000K, 41 foot candles at 5 feet, 16 foot candles at 8 feet
• Narrow flood beam spread and 40° visual cutoff
• Replaceable LED Module
• 50,000 hour potential life
• Less than 1/8" thick, super low profile die-cast aluminum trim

Finish CH-Chrome WT-White

HR-LED351-BK/WT

WAC LEDme Downlight HR-LED351 Square, Reflector

• Full scale dimming to 1%
• Light level for 3000K, 41 foot candles at 5 feet, 16 foot candles at 8 feet
• Narrow flood beam spread and 40° visual cutoff
• Replaceable LED Module
• 50,000 hour potential life
• Less than 1/8" thick, super low profile die-cast aluminum trim
• Example Order: HR-LED311-BK/BN

Finish BK/BN - Black/Brushed Nickel, BK/WT-Black/White, WT/WT-White/White

HR-LED371-WT

WAC LEDme Shower Light HR-LED371 Square

• Full scale dimming to 1%
• Suitable for wet location
• Light level for 3000K, 41 foot candles at 5 feet, 16 foot candles at 8 feet
• Narrow flood beam spread and 40° visual cutoff
• Replaceable LED Module
• 50,000 hour potential life
• Less than 1/8" thick, super low profile die-cast aluminum trim

Tempered borosilicate glass lens.
UL listed for wet locations

Finish CH-Chrome WT-White

WAC LEDme 3" Remodel Housing

• LEDs included
• IC rated - Suitable for direct contact with insulation
• Non-IC rated - 3" clearance on all sides must be maintained when insulation is present

WAC LEDme 3" New Construction Housing

• LEDs included
• IC rated - Suitable for direct contact with insulation
• Non-IC rated - 3" clearance on all sides must be maintained when insulation is present

WAC Lighting HR-833 Beveled Round Die Cast Downlight

• Beveled Round Die Cast Downlight.
• WAC brand 3" undercabinet trims have been engineered and tested to provide optimal lamp performance from MR16 lamps
• Order lamp separately. Clear lens included

WAC Lighting HR-834 Metal Trim Ring with Step Baffle

• Metal Trim Ring with Step Baffle.
• WAC brand 3" undercabinet trims have been engineered and tested to provide optimal lamp performance from MR16 lamps
• Order lamp separately. Clear lens included

WAC Lighting HR-836 Metal Trim Ring

• Metal Trim Ring
• WAC brand 3" undercabinet trims have been engineered and tested to provide optimal lamp performance from MR16 lamps.
• Order lamp separately. Clear lens included

WAC Lighting HR-837 Round Miniature Directional Spot

• Beveled Round Die Cast Downlight.
• WAC brand 3" undercabinet trims have been engineered and tested to provide optimal lamp performance from MR16 lamps
• Order lamp separately. Clear lens included

WAC Lighting HR-D321 Open Specular 3" Trim

• Open Specular 25° adjustment from vertical.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.
• Allows pivot adjustment of 25° and 350° rotation.

WAC Lighting HR-D324 Basic Baffle

• Basic Baffle 25° adjustment from vertical.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.
• Allows pivot adjustment of 25° and 350° rotation.

WAC Lighting HR-D325 Pinhole Trim

• Pinhole Trim.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.

WAC Lighting HR-D326 Slot Trim

• Slot Trim 25° adjustment from vertical.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.
• Allows pivot adjustment of 25° and 350° rotation.

WAC Lighting HR-D327 Gimbal Ring 3" Trim

• Gimbal Ring 25° adjustment from vertical.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.
• Allows pivot adjustment of 25° and 350° rotation.

WAC Lighting HR-D329 Drop Dish Glass Dome 3" Trim

• Drop Dish Glass Dome for Showers.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output.
• U.L.listed for wet locations .
• 50w Xenon Bi-pin max.

WAC Lighting HR-D329-S Flat Glass 3" Trim

• 3" Shower light- Clear, flat lens
• 25° adjustment from vertical
• Abrasion resistant finish
• Solid die cast aluminum construction with heavy gauge retention clips to firmly hold trim to housing
• Transformer and junction box accessible from below the ceiling
• UL listed for wet locations
• Re-lamp without removing entire trim from ceiling

WAC Lighting HR-D332 Glass Ring 3" Trim

• Glass Ring.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.

WAC Lighting HR-D333 Glass Cylinder 3" Trim

• Glass Cylinder.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.

WAC Lighting HR-D334 180° Shielded Wall Wash 3" Trim

• 180° Shielded wall wash 25° adjustment from vertical.
• Die-cast construction, Smaller scaled trims for better aesthetic without sacrificing light output, Perfect for task and accent applications.
• Allows pivot adjustment of 25° and 350° rotation.

WAC Lighting HR-800 3" Low Profile Housing for use with Remote Transformer for Under Cabinet Application

• Thermal protection in transformers only
• Order remote transformer separately
• Cutout: 3"
• Low profile housing with snap-out style mounting clips

WAC Lighting HR-801 3" Remodel Housing equipped with Electronic Transformer

• 3" clearance on all sides must be maintained when insulation is present
• J-box and transformer accessible through ceiling opening
• Electronic transformer features auto-reset, short-circuit, and soft start technologies
• May be used in 2" x 6" joist installations
• UL listed for direct chain wiring to other housings
• Integral Electronic Transformer

WAC Lighting HR-802 3" New Construction Housing equipped with Electronic Transformer

• 3" clearance on all sides must be maintained when insulation is present.
• J-box and transformer accessible through ceiling opening.
• Electronic transformer features auto-reset, short-circuit, and soft start technologies.
• May be used in 2" x 6" joist installations
• Captive hanger bars included
• UL listed for direct chain wiring to other housings

WAC Lighting HR-806 3" Housing for use with Remote Transformer for Ceiling Application

• Cutout: 3"
• 3" clearance on all sides must be maintained when insulation is present.
• Low profile housing with snap-out stylemounting clips.
• Order remote transformer separately

WAC Lighting HR-301E Remodel Non-IC Housing equipped with Electronic Transformer

• Cutout: 3 7/8"
• NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present
• Integral Electronic Transformer features auto-reset, short circuit,and soft start technologies
• J-Box and transformer accessible through ceiling opening
• UL listed for direct chain wiring to other housings

WAC Lighting HR-301M Remodel Non-IC Housing equipped with Magnetic Transformer

• Cutout: 3 7/8"
• NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present
• Integral Electronic Transformer features auto-reset, short circuit, and soft start technologies
• J-Box and transformer accessible through ceiling opening.
• UL listed for direct chain wiring to other housings

WAC Lighting HR-302E New Construction Non-IC Housing equipped with Electronic Transformer

• Cutout: 3 7/8"
• New Construction Non-IC Housing.
• NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present Integral Electronic Transformer features auto-reset, short circuit, and soft start technologies that maximize lamp life
• J-box and transformer accessible through ceiling opening
• UL listed for through branch circuit wiring

WAC Lighting HR-302M New Construction Non-IC Housing equipped with Magnetic Transformer

• Cutout: 3 7/8"
• New Construction Non-IC Housing
• NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present
• J-Box and transformer accessible through ceiling opening
• UL listed for through branch circuit wiring