WAC Lighting Shades, Shields, Lenses & Accessories

QF-195 X6 PT with G113 BL
Fixtures and shades ordered separately.

G113 SERIES - - Acid etched translucent
press molded molded ring - 3 3/8" Dia x 1 7/8"

WAC Glass Shade G113

Acid Etched Translucent Press Molded Ring

Finish AM-Amber, BL-Blue, WT-White
Length 1 7/8"
Width 3 3/8"

814-BK with G114-RD
Fixtures and shades ordered separately.

G114 SERIES - Acid etched mouth blown cased glass deep bell - 2 5 /8 "Dia x 2 1 /2 "L

Acid Etched Cased Glass Deep Bell

Finish AM-Amber, BL-Blue, GR-Green, RD-Red, WT-White
Length 2 1/2"
Width 2 5/8"

G115 SERIES - Mesh bulb shield - 2 1/4" Dia x 1 3/4" L

Mesh Bulb Shield.

Finish BZ-Bronze, CH-Chrome, PT-Platinum
Length 1 3/4"
Width 2 1/4"

814-BK with G116-PT
Fixtures and shades ordered separately.

G116 SERIES - Solid bulb shield- 2 1/4" Dia x 1 3/4" L

Solid Bulb Shield.

Finish BZ-Bronze, CH-Chrome, PT-Platinum
Length 1 3/4"
Width 2 1/4"

G119 SERIES – Acid etched translucent press molded cone - 2 1/2" Dia x 1 5/8 " L

WAC Glass Shield G119

Acid Etched Translucent Press Molded Cone.

Finish AM-Amber, BL-Blue, WT-White
Length 1 3/4"
Width 2 1/4"

Bulb Shields MBS-11 & MBS-16

Snaps over an MR11 or MR16 bulb to eliminate glare from back of bulb. Use with LHT, HHT and JHT-204, SF-214, MM-204, DL-204, ME-204, and MI-204.

MBS-11 Used With MR11
MBS-16 Used With MR16

Finish: BK-Black, BN-Brushed Nickel, WT-White

Bulb Shields SBS-11 & SBS-16

Snaps over an MR11 or MR16 bulb to eliminate glare from back of bulb. Use with LHT, HHT and JHT-204, SF-214, MM-204, DL-204, ME-204, and MI-204.

SBS-11 Used With MR11
SBS-16 Used With MR16

Finish: BN-Brushed Nickel

WAC Color Lenses

Replaces the clear lens supplied with MR16 and MR11 track fixtures. Adds dramatic effect.

MR11

MR16

Available: In 5 colors: RED (red), BLU (blue), YEL (yellow), GRN (green), and AMB (golden amber).

WAC Dichroic Color Lenses

Create dramatic effects by coloring or tinting with a variety of lenses in primary and secondary colors.

Dichroic Lenses have superior optical clarity for pure, consistent color that resists heat and will not fade. Fit any MR16 or MR11 lamp.

MR11

MR16

Available: In 5 colors: RED (red), BLU (blue), YEL (yellow), GRN (green), and AMB (golden amber).

Frosted Glass Lens

Replaces the clear lens supplied with MR16 and MR11 track fixtures. Reduces glare.

UV Filter Lenses

Fits any MR16 or MR11 lamp

Blocks UV radiation (exceeds 99% for radiation below 400nm) while transmitting high quality visible light. Reduces ultra violet light to protect artwork and fabric from fading.

Retards the photochemical degradation of fabrics, art works, historical documents, or other works of art.

Spread Lenses

Fits any MR16 or MR11 lamp

Spreads light in an even and overall pattern. Used inside the lens holder on fixtures 826, 846, 876, and 1126.

When used with glass covered MR series lamps, can also be used on 007, 160, 180, and 808 fixtures.

Beam Elongator Lenses

Fits any MR16 or MR11 lamp

Replaces standard MR16 and MR11 track fixture lens. Directs the lamp beam to create a strip of light.

Used inside the lens holder on fixtures 826, 846, 876, and 1126.

When used with glass covered MR series lamps, can also be used on 007, 160, 180, and 808 fixtures.

Honey Comb Louver Lenses

Matte black louvers provide additional shielding and glare control. Easily installed on all enclosed track heads without tools or additional holding rings. Fits any MR16 or MR11 lamp.

Used inside the lens holder on fixtures 826, 846, 876, and 1126 to shield lamp and reduce glare.

When used with glass covered MR series lamps, can also be used on 007, 160, 180 and 808 fixtures.

WAC LENS-16-CRL Cross Louver Shield

Reduces Glare from the lamp souce when viewed from the sides. Has a negligable effect on illumination level directly under the lamp. The Crose Louver Shield snaps into place and allows shielding in numerous applications such as corridors and perimeter lighting. Die cast aluminum construction with matte black Finish: .

LENS-16-CRL Used With MR16

NEW Dark Bronze Finish on WAC Barn Door Accessory

The warm look of Dark Bronze finish is now available for WAC Line Voltage 188 series track luminaires with compatible barn door accessory.

These additions coordinate with today’s fixtures, hardware, furniture, and exposed architectural accents, effectively extending these already versatile track heads into more traditional applications.

Barn Door Accessory

Finish NEW Dark Bronze, BK, BN, WT
Barn Door Accessories are only for use with models 178, 188, 024 and 048 to control glare from the lamp.

WAC PAR Barndoor Accessories

Barn Door Accessories are only for use with models 178, 188, 024 and 048 to control glare from the lamp.

Finish: NEW Dark Bronze, BK-Black, BN-Brushed Nickel, WT-White